Improvement of existing power supply and internal and external illumination with LED Lights at FSD Parsakhera under DO Bareilly

Amount

Supplying , installation , testing and commissioning of cubical type,inverted V shaped top, outdoor feeder pillar panel with size (1.0x1.0x.4 Mtr) suitable for operation at 415 (+/-) 6% Volts,50Hz,3 Phase 4 Wire system made out from CRCA sheet steel 2.0 mm and covers shall be cold rolled sheet thickness not less than 1.6mm fabricated factory finished followed-42 by powder coated painting & provided with gaskit etc. to make dust & vermin proof degree of IP ,Weather Proof, hinged type openable door , loaking arrangement , detachable gland plate , connection , interconnections with suitable size (150 Amp capacity) 4 strip high conductivety elctrical aluminium (ALU) busbar codifies in red,yellow,blue and black colour and PVC insulated copper conductor cable 1100Volt grade for internal wiring including providing and fixing digital type Ampere meter, Voltmeter, Indication LED lamp, ,Labeling comprise white letters on black background including foundation works etc as required with following:- (Confoming to relevent BIS/IS standard with upto date amendments) 1) 4P MCCB 100Amps,36KA-01No 2) 4P MCCB 63 Amps.25KA-03 Nos 3) MCB DP 32 Amps -02 Nos 4) TPN MCB 32Amp-02 Nos 5) 4 strip AL Busbar 150Amp- 01 Set

Supply of PVC sheathed L.T. ABC Cable of 1.1 KV Grade Al Conductor cable as reqd as per IS-14255 3X70 + 1X16 + 1X50 sqmm confirming to IS –7098 part I with up to date amendments

Erection of ABC Cable on existing poles including fixing accessories as reqd.

Supply of ABC clamp (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of ABC hook (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of Suspension Clamp (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of Ded Clamp (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of PG connector (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of PG Clamp (Conforming to relevant BIS/IS standard with upto date amendments)

Supply and fixing of weather proof 3 phase SMC MOULDED SERVICE CONNECTION BOARDS / Busbar box for AB Cables with pole mounting arrangement, with cable entry from bottom or sides and Busbar for high fault currents (Conforming to relevant BIS/IS standard with upto date amendments)

Supply of PVC insulated PVC sheathed cable of 1.1KV grade armoured Underground aluminum conductor cable as reqd confirming to IS –7098 part I) of the following size as per direction of engineer in charge .

2 X 10 Sqmm

4X10 sqmm

4X16 sqmm

4X25 sqmm

Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required

Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1KV grade of following size on wall surface as required. Upto 35 sq. mm (clamped with 1mm thick saddle)

Supplying and fixing of light class G.I. pipe of 50 mm dia.(nominal) 3metres length along the pole for protection of underground cable as required.(conforming to IS-1239 part 1 (2004) with upto date amendments)

Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing along with existing surface/ recessed conduit/ submain wiring/ cable as required. (Conforming to relevant BIS/IS standard with upto date amendments)

Supply and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required. (conforming to IS 12943 (1990) with upto date amendments)

2 X 10 sq. mm (19mm)

4 X 10 sq. mm (25mm)

4 X 16 sq. mm (28mm)

4 X 25 sq. mm (28mm)

Supply, installation, testing and commisioning of weather proof MS loop in loop out busbar box havin 4P MCCB 63Amp and of size not less than 450x350x200 mm with 4 Nos. suitable capacity ALU (upto 150 Amp) Bus Bar (R,Y,B & N) duly finished and painting, detachable gland plate & Arrangement for interconnection etc as required. (Confoming to relevent BIS/IS standard with upto date ammendment)

Supplying and drawing following sizes of FRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required (Confirming to IS694-2010) as per direction of engineer in charge .

3x2.5sqmm

3x1.5sqmm

5x1.5sqmm

3 x 4 sq. mm

Supplying and fixing of following sizes of steel conduit along with accessories in surface/ recess including painting in case of surface conduit, or cutting the wall and making good the same in case of recessed conduit as required.. (conforming to IS-9537 Part 3 with upto date amendments.) 25 mm

Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc. as required. (conforming to IS 14772 (2000) with upto date amendments) 200mm x 150mm x 75 mm deep

Supplying and fixing following piano type switch/ socket on the existing switch box/ cover including connections etc as required .(conforming to IS 3854:1997 with upto date amendments ) 5/6 Amp Switch

5/6 amps switch

Installation, testing and commissioning of pre-wired, fluorescent fitting / compact fluorescent fitting of all types, complete with all accessories and tube etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required.

Supplying and fixing DP sheet steel enclosure on surface/ recess along with 25/32 A 240 V C curve DP MCB complete with connections, testing and commissioning etc. as required. (conforming to IS 13032, IS 8623 with upto date amendments)

Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) (conforming to IS-2675(1983) with upto date ammendment ) 6 way , Double door

Supplying and fixing following way, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator ) conforming to IS-2675 (1983) with upto date amendments. - 4 way (4+12) double door.

Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, "C" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. (conforming to IS-IEC60898-1 with upto date amendments. )

Single pole 16A

Double Pole 32A

Triple Pole & Neutral 63A

Supplying and fixing of 32 mm dia X 2.00 metres long G.I. pipe (medium class) bracket for mounting of fluorescent / HPMV / HPSV street light fitting on pole including bending the pipe to the required shape, 2 nos 40 mm X 3 mm flat iron clamps with nuts, bolts and washer, painting the flat iron with primer and finish paint etc. as required.(conforming to IS-1239 part 1 (2004)

Supply , Installation, Testing & Commissioning of LED Street Light fitting with mandatory driver set having die cast aluminium body and lenses suitable for 45 watt with IP66 protection having Luminous 110 Lm/watt to 125Lm/Watt or Luminous should not be less than 4800 and having SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs ,autorestart having minimum 2 years warranty (Conforming to IP 65/IP66 protection and IS-16103-2012) as per direction of engineer in charge .

Supply , Installation, Testing & Commissioning of integral well glass luminaire compressed of dia cast canopy gear box housing and glass driver surge with heat resistance glass of LED well glass fitting 35 to 40 watt, minimum 110 Lm/watt to 125 Lm/watt or Luminous should not be less than 4200, SPD with internal surge protection upto 4KV and External surge protection upto 10KV,Line voltage protection upto 8Hrs with autorestart having minimum 2 years warranty (Conforming to IP 65/IP66 protection and IS-16103-2012) as per direction of engineer in charge .

Supplying of 18 to 22 watt LED polycarbonate batten fixture with minimum 100 lumens/watt or Luminous should not be less than 2000 having minimum 2 years warranty (conforming to IS-16103 part 2 (2012)) as per direction of enginner in charge.

Supply , Installation, Testing & Commissioning of loop in loop out box made of PVC sheet 200x 150x100 mm having suitable size 2 nos. terminals and 1 no. SP MCB 5/6A detachable gland plate, interconnection etc are required (Confoming to relevent BIS/IS standard with upto date ammendments)

Supplying and fixing 20 A, 240 volts, SPN industrial type, socket outlet, with 2 pole and earth, metal enclosed plug top alongwith 20 A "C" curve, SP, MCB, in sheet steel enclosure, on surface or in recess, with chained metal cover for the socket outlet and complete with connections, testing and commissioning etc. as required. (Confoming to relevent BIS/IS standard with upto date ammendments)

Wiring for circuit/ submain wiring alongwith earth wire with the Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (Conforming to relevant BIS/IS standard with upto date amendments)

2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire

2 X 4 sq. mm + 1 X 4 sq. mm earth wire

2 X 6 sq. mm + 1 X 6 sq. mm earth wire

Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required. (Conforming to relevant BIS/IS standard with upto date amendments)

12 Module (200mmX150mm)

8 Module (125mmX125mm)

6 Module (200mmX75mm)

4 Module (125mmX75mm)

3 Module (100mmX75mm)

Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. (Conforming to relevant BIS/IS standard with upto date amendments)

5/6 amps switch

15/16 amps switch

3 pin 5/6 A socket outlet

6 pin 15/16 A socket outlet

Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required. (Conforming to relevant BIS/IS standard with upto date amendments) Group C

Supply of ceiling fan with 1200 mm sweep (Conforming to relevant BIS/IS standard with upto date amendments)

Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable etc. as required.

Supplying and fixing two module stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc.as required. (Conforming to relevant BIS/IS standard with upto date amendments)

Providing and laying earth connection from earth electrode with 6 SWG dia G.I. Wire in 15 mm dia G.I. pipe from earth electrode including connection with G.I. thimble excavation and re-filling as required. (Conforming to relevant BIS/IS standard with upto date amendments)

Earthing with G.I. earth pipe 4.5 meter long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/coke and salt as required. (Conforming to relevant BIS/IS standard with upto date amendments)

Dismantling of over head lines comprising of copper/ aluminium over head conductor, G.I. wire, cross arms, insulators etc. as required.

Credit the following items

Aluminium Scrap (i.e., Cables etc) (L.S.)

AVADH KAARYA SOLUTIONS LLP

chauhan and associates

ANU ENGINEERING CORPORATION