const. ANM Center Akhodi

Site Development, Civil Work

Excavation in soil in Hilly Area by mechanical means

Excavation in foundation for retaining, breast walls etc, in all types of soils and rocks including all

R. R. Dry

Brick Masonary 1:6

Tor Steel

Cement plum Masonry with 40% plum & 60% 1:3:6 cement concr

Cement Plaster 1:4 (15mm)

Earth Work

Filling avaiable excavagted earth (excluding rock) in trenches, plinth, sides of foundations etc in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering. lead up to 50m and lift upto 1.5m

Diluting and injecting chemical emulsion for POST CONSTRUCTIONAL anti0termite treatment (excluding the cost of chemical emulsion Treatment of soil under existing floors using chemical emulsion @ on litre per hole, 300mm apart including drilling 12mm diameter holes and plugging with cement mortar 1:2 *1 cement : 2 coarse sand) to match the existing floor: with Chlorpyriphos/Lindane EC 20% with 1% concentration

Supplying and filling in plinth with sand under floors including watering, ramming, consolidatin and dressing complete

Filling with available fly ash and earth (excluding rock) in trenches or embankment in layers (each layer should not exceed 15cm)

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level 1:4:8

Providing and laying damp proof course 40mm thick with cement concrete 1:2:4

Providing and applying a coat of residual petroleum bitumen of grade of VG-10 of approved quality

Making plinth protection 50mm thick of cement concrete 1:3:6

Providing and laying in position specified grade of reinforce cement concrte, excluding the cost of centering, shuttering, finishing and reinforcement All work up to plinth level 1:1.5:3

Reinforced cement concrete work in walls including attached pilasters, buttressess, plinth and string coursed, fillets, columns, pillars, piers, abutments, posts and excluding cost of centering shuttering, finishing and reinforcement 1:1.5:3

Steel reinforcement for RCC Work

Foundations, footing, bases of columns etc for mass concrete

Columns, Pillars, Piers, Abutment, Posts and Struts

Lintels, Beams, Plinth Beams, Girders, Bressumers and Cantilevers

Suspended Floors, roofs, landing, balconies and access platform with water proof ply 12mm thick

Shelves (Cast in situ)

Brick work with common burnt clay FPS (non modular)bricks of class designation 7.5 in foundation and plinth in Cement Mortar 1:6

Brick work with common burnt clay FPS (non modular)bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shaper and size

Half Brick Masonary with common burnt clay F.P.S. bricks of class designation 7.5 in superstructre above level up to floor V level Cement Mortar 1:4

Extra for providing and placing in position 2 nos 6mm dia M.S. Bars at every third course of half brick masonary

Providing and fixing 18mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for kitchen platforms, vanity counter, window sills of required size approved shade colour and texture laid over 20mm thick base cement mortar 1:4

Providing and fixing ISI marked flush door shutter 35 mm Thick

Providing and fixing aluminium handles ISI markd anodised transparent or dyed to required colour or shade with necessary screws etc

Providing and fixing chromium plated brass casement stays with necessary screws etc

Providing and fixing aluminium sliding door bolts 300*16mm

Providing and fixing aluminium tower bolts 250*10mm

Providing and fixing aluminium hanging floor door stopper complete single rubber stopper

Providing and fixing fly proof galvanized MS wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4mm

Providing and fixing pressed steel door frames conforming to IS 4351 manufactured from commercial mild steel sheet of 1.60mm thickness

Providing and fixing factory made ISI marked steel glazed doors, windows and ventilatores, side top centre hung with beading and all members

Providing and fixing glass panes with putty and glazing clips in steel doors windows clerestory windows

Steel work welded in built up section/framed work, including cutting hoising, fixing in position and applying a priming cost of approved steel primer

Providing and laying vitrified floor tiles in defferent size with water absorption less than 0.08%

Providing and laying Vitrified tiles in different sizes with water absorption less than 0.08%

Providing and laying Ceramic glazed floor tiles of size 300*300mm of 1st quality conforming to IS 15622 of approved make in colours such as shite, lvory, grey, fume res brown laid on 20mm thick cement mortar 1:4

Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS 15622

Providing gola 75*75mm in cement concrete 1:2:4 including finishing with cement 1:3

Making khuras 45*45cm with average minimum thickmess of 5cm cement concrete 1:2:4

Providing & fixing on wal lface unplasticised Rigid PVC rain water pipers conforming to I 13592 type A including jointing with seal ring conforming IS 110 mm dis

Providing & fixing on wal face unplasticised PVC moulded fittting/accessories for unplasticised rigid PVC rain water piper conforming to IS 13592 raing water pipers conforming with seal ring conforming to IS 5362 110mm

Bend 87.5 degree (110mm bend)

Shoe Plain (110mm shor)

Providing and fixing unplasticised PVC pipe clips of approved design to unplasticised PVC rain water pipes by means of 50*50*50mm hard wood plugs, screwed with MS screws of required length including (110 mm)

6 mm cement plaster of mix :1:3 (1 cement : 3 fine sand)

12mm cement plaster of mis 1:6

15mm cement plaster on the rough side of single or half brick wall of mis 1:6

Providing and applying white cement based putty of average thickness 1mm of approved brand and manufactrer, over the plastered wall surface to prepare the surface even and smooth complete

Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade (New work (two or more coats) over and including priming coat with cement primer

Finishing walls with textured exterior paint of required shade new work (two or more coats applied @ 3.28 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg. 10sqm

Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade two or more coats on new work over an under coat of suitable shade with ordinary paint of approved brand and manufacture

Steel Work welded in built up sections/framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structure steel etc. in Gate & simmilar works

UMROD

TIKA RAM CHAMOLI

Ramesh kumar joshi

GIRJA PRASAD SEMWAL

UMROD

Ramesh kumar joshi

TIKA RAM CHAMOLI