Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹21.7 LAccepted-AOC | L1 | Accepted-AOC Accepted | |
| 2 | L2₹24.9 L+₹3.1 L (14.3%)Rejected-AOC | L2 | Rejected-AOC Rejected |
Tender Value
₹25 L
EMD Value
₹25,000
Closing Date
26 Apr 2022, 5:00 pmClosed
City Engineer
JCMC Jalgoan
Providing supplying spares and rectification of electrical and mechanical equipment in pump house and switch yard of raw water pump house near Waghur Dam Annual maintenance for year 2022-23 3rd call
2022_JCMCJ_791243_1
Tender Notice No 142
Open Tender
Miscellaneous Services
Item Rate
365 days
JCMC Jalgaon
Please refer Tender documents.
2 documents required · 2 mandatory
₹1,000
₹25,000
14 Jun 2023
20 Apr 2022
27 Apr 2022
20 Apr 2022
26 Apr 2022
20 Apr 2022
Amount
Supply and Installation of 33KV, 3 core, Aluminum armored cable outdoor cable end termination joint kit (ISI make). Work involve cutting of existing joint, measure insulation value and making joint, refixing to system.
Supply & erecting 3.3 KV 3 core 300 sq.mm alum. Armoured cable.
Supply & erecting 3.3 KV 3 core 70/95 sq.mm alum. Armoured cable.
Excavation and backfilling of trench for adjustment of 33 KV cable for joint.
Supply and installation of LT out door cable joint for auxiliary transformer
Supply and installation of 33 KV Isolator set of 3 with alignment
Dismantailing of existing 33 KV Isolator complete set
Repairing of 33 KV existing isolator along with required spares & hardware’s with alignment for smooth operations
supply and installation of 33 KV A B Switch for auxiliary Transformer
Dismantailing of existing 33 KV A B Switch complete set
Repairing of 33 KV existing A B Switch including required spares & hardwares with alignment for smooth operations
Supply and installation of 33 KV Horn Gap unit of 3 with fuses
Repairing of 33 KV Horn gap post for proper fixing
supply and installation of Horn gap fuses
Supply and installation of 33 KV ,D O unit of 3 with fuses
Supply and installation of D O fuse 50 amps
Supply and installation of 33 KV, LA single post
Supply and installation of Post Insulator with Pin
Supply & Installation of 33 KV outdoor PT
Supply & Installation of 33 KV outdoor CT
Repairing of existing 33 KV outdoor PT
Repairing of existing 33 KV outdoor CT
Repairing of post insulator and cleaning by CTC
Tightening of all conductors in sub station as preventiv maintenance
Transformer, 33 KV/3.3 KV, 3000 KVA complete overhauling, Bucolz relay, BDV test, PPM test, tightening of all 33 KV Bushing and conductors removing air from Bucolz relay, cleaning of all bushing with CTC. Attending leakages if any.
Transformer, 33 KV/3.3 KV, 3000 KVA. Oil filtration with test report.
Supply & Installation of Buchloz relay for 33 KV out door transformer.
Supply & Installation of Breather with silica jel for 33 KV outdoor Transformer.
Auxiliary Transformer 33 KV /440 Volts complete preventive maintenance. Tightening of all bushing, gaskets, conductors and cable terminations, earthing etc
Oil filtration of Auxiliary Transformer 33 KV/440 Volts
Complete overhauling of 33 KV out door VCB. All control wiring tightening, spring changing motor testing, earthing tightening etc
Earthing of sub station - Replace existing material by new material to improve value
Spreading clear metal in yard
Painting of complete structure of sub stations by Red oxide as primer and Aluminum paint
illumination in yard. Supply and installation of fused tubes, bulbs wiring testing etc
Supply and installation of Indoor cable joint for 3.3 KV, 500 HP motor, copper multi strand for H T motor Dismantailing of exi etcsting burnt out / heated cable joint, cleaning cable by CTC preparing new joint and HT taping.
Repairing of existing joint of 3.3 KV H T motor. Cleaning by CTC to clean cable and Lugs for carbon free particle’s, re-taping by H T tape
Supply and installation of H T capacitor (120KVAR unit)
Supply of L T capacitor
Installation of L T capacitor
Supply of H T HRC Fuse 3.3 KV/50 Amps capacity with barrel for capacitor
500 HP, 3.3 KV, H T motor complete overhauling with alignment. Shifting motor from foundation by disconnecting cable, pulley etc. Dismantailing / taking out rotor from stator. H T warnishing to rotor and stator by heating process Inspection of bearings, end cover bearing housing etc
Providing & Fitting Bearing to the motor DE side including necessary fixtures etc. complete.
Providing & Fitting Bearing to the motor NDE side including necessary fixtures etc. complete.
Workshop work for filling weared out bearing housing
Rotor balancing for proper alignment to improve life of motor
Painting to motor by Red oxide as primer and two coats by Smoke Gray paint
Preventive maintenance of motor. Inspection of bearings, cable joints, foundation bolts tightness, cleaning of cooling system greasing to DE NDE bearings
Replace of Motor from foundation to other foundation
Alignment of Motor to pump
500 H.P. 375 Kw. Pump set (Kirloskar make) Remove of existing old split casing pump from row water pumping station for Repairing purpose.
Providing & Fitting Impeller to the pump including necessary Fixtures etc. complete
Providing & fitting Pump shaft to the Pump including necessary fixtures etc complete.
Providing & fitting Casing wear Ring &suction side) to the Pump including necessary fixtures etc. complete.
Providing & Fitting Casing Wear Ring (Delivery side) to the pump including necessary fixtures etc. complete.
Providing & Fitting Split Gland to the pump including necessary fixtures etc. complete.
Providing & Fitting Bearing Holder DE to the pump including necessary fixtures etc. complete.
Rewinding Motor of EOT crane.
Repairing Panel board of EOT crane with required accessories.
Providing & Fitting Bearing Cover DE to the pump including necessary fixtures etc. complete.
Providing & Fitting Bearing Cap to the pump including necessary fixtures etc. complete.
Providing & Fitting Split Lantern Ring to the pump including necessary fixtures etc. complete.
Providing & Fitting Liquid Deflector Rubber to the pump including necessary fixtures etc. complete.
Providing & Fitting Shaft Sleeve to the pump including necessary fixtures etc. complete.
Providing & Fitting shaft Sleeve Nut to the pump including necessary fixtures etc. complete.
Providing & Fitting Bearing Nut to the pump including necessary fixtures etc. complete.
Providing & Fitting Bearing Lock Nut to the pump including necessary fixtures etc. complete.
Providing & Fitting Sealing Tube to the pump including necessary fixtures etc. complete.
Providing & Fitting Set of Gaskets to the pump including necessary fixtures etc. complete.
Providing & Fitting Set of Ring to the pump including necessary fixtures etc. complete.
Providing & Fitting Set of Fasteners to the pump including necessary fixtures etc. complete.
Providing & Fitting Gland Packing to the pump including necessary fixtures etc. complete.
Providing & Fitting Bearings to the pump including necessary fixtures etc. complete.
Providing & Fitting Love joy Coupling with rubber & studs complete with suitable bore size
Providing nylon slings belts of 5 to 10 tan capacity (for lifting purpose)
Pump Coloring Charges
EOT crane maintenance work. Inspection of main drum, motors, panel relays etc
Replace faulty or burnt MCB in EOT crane panel
Overhauling of motors with replacement of bearings for EOT crane
Cleaning complete both rail of EOT crane
H T Panel - inspection of all parts in one VCB panel for smooth operations
supply and installation of closing and tripping coil
supply and installation of spring charging motor
Repairing of spring charging motor
Supply and installation of spring charging drum mechanism
Repair of VCB, inspection for smooth operations and trolley alignment
Preventive maintenance of VCB
Supply & Installation of closing /Tripping coil of VCB Indoor
Supply & Installation of Earth fault relay
Supply & Installation of Thermostat
Supply & Installation of Breaker control switches
LT panel - Supply and replacement of faulty/ burnt out spaares
Preventive maintenance of L.T. panel.
Control and Relay panel wiring replace by new whereever damaged
Battery charger panel -Supply and installation of burnt out spares
Preventive maintenance of Battery charger panel
Supply and installation of 110 volt DC Batteries
Preventive maintenance of 55 Batteries
Illumination system - Supply and Installation of burnt tube lights, Exhaust fans MCB, etc.
Supplying spanner (Ring)
Supplying Spanner (fix)
Supplying Multi-meters 1000 Amp.
Supplying megger 1 KV (1000 Volts)
Supplying pipe wrentch 18”
Supplying pipe wrentch 24”
Supplying pipe wrentch 36”
Supplying Chain Pulley 2 tone
Supplying Chain Pulley 3 tone
Supplying hammer heavy weight up to 10 kg.
Supplying air blower for panel, VCB cleaning purpose.
durgam Electrical Enterprises
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .