8120/SAR-13/E8 REPAIRS/REREPLACEMENT CRTAIN INTERNAL ELECTRIFICATION INCLUDING FANS,GEYSERS AT DOMESTIC/TECHNICAL AREA. AT 1AFSB DEHRADUN UNDER GE (AF) SARSAWA

Amount

Taking down carefully unserviceable aluminum/copper point wiring (light/ fan/ socket/ power) complete including fittings such as switches, sockets, ceiling roses etc but excluding light fittings and exhaust fans etc removing and making good disturbed surfaces of wall/ceiling etc complete all as specified and directed by Engineer-in- Charge.

M&L for point wiring with 1.5 Sq mm nominal area PVC insulated and unsheathed cable single core FRLS copper cable 1100 Volts with multistranded, copper conductor in and including PVC rigid concealed conduit (heavy grade) including chases cutting as required on site and conduit accessories along with continous earth wire 1.5sqmm PVC insulated and unsheathed single core FRLS cable 1100 Volts grade with standard copper conductor and connected to common earth dolly, with and including cadmium plated sunk Modular metal flush boxes for modular switches complete all as specified and directed, One light point controlled by one switch one way . Note:- modular white cover and plate with frame will be measured and paid saperately under respective item complete all as specified and directed by Engineer-in- Charge.

All as per item No 2 here in before but One celling / Exhaust fan point controlled by one switch one way complete all as specified and directed by Engineer-in- Charge.

All as per item No 2 here in before but One socket out let 5 Amps 5 pin on independent board complete all as specified and directed by Engineer-in- Charge.

All as per item No 2 here in before but One socket outlet 5 Amps 5 Pin on same board with other switches complete all as specified and directed by Engineer-in- Charge.

All as per item No 2 here in before but with cable size 2.5 Sq mm for one 5 pin 15 Amps socket out let on independent board and multistrand insulated copper earth continuity conductor of size 1.5 sqmm all as specified and directed by Engr-in-Charge.( circuit to be laid seperatly )

S&F modular switch 1 way 6 amps 1 module complete all as specified and directed by Engineer-in- Charge.

M/L for modular socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and directed by Engineer-in- Charge.

S & F modular socket 6A/16 A-2/3 pin combined 2 module.

S&F modular switch 1 way 16 amps 1 module.

S&F modular Bell push 6 A 1 module complete all as specifed and as directed.

S&F Buzzer,Ding Dong AC.230 Volts,single pole

S&F Fan step regulator,120 W -2 module.

Supply & fixing white modular cover plate with frame for fixing of modular switches of following :- (a) 2 module complete all as specifed and as directed.

Ditto but 3 module complete all as specifed and as directed.

Ditto but 4 modulecomplete all as specifed and directed.

Ditto but 6 module complete all as specifed and as directed.

Ditto but 8 module complete all as specified and directed.

S& F blank speacer plate for single module complete all as specified and directed.

Taking down old u/s main switch/DBs/MCB DB with MCBs complete all as specified and directed.

S & F 8Way double door Tripple Pole Neutral vertical load line Distribution Board suitable for Flush mounting and suface mounting with 160 A & 250 A copper bus bar with neutral bars and earth bars with provision for TP125 MCCB as incomer and SP/TP MCBs as out going. complete all as specified and directed. Make :- Havells, L & T or Equivalent complete all as specified and directed.

S & F MCB distribution board Tripple pole and neutral 4 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail double door complete including taking down/dismantling of old unserviceable one complete all as specified and directed.

S & F in repair MCB distribution board single pole and neutral 12 way double door factory made sheet steel, phosphates, powder coated with 200 Amps rated bas bar, 415 volts, neutral link, earth bar and Din rail double door complete all as specified and directed.

S & F MCB distribution board single pole and neutral 8 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete including taking down/dismantling of old unserviceable one complete all as specified and as directed.

S & F MCB distribution board single pole and neutral 6 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete including taking down/dismantling of old unserviceable one complete all as specified and as directed.

S & F MCB distribution board 4 way double door factory made sheet steel, phosphates, powder painted with 200 Amps rated bas bar, 240 volts, neutral link, earth bar and Din rail single door complete including taking down/dismantling of old unserviceable one , complete all as specifed and directed.

S & F MCB TPN 63 Amp 415 V, complete all as specifed and directed.

S &F MCB SPN 35 to 60 Amps 240 volts complete all as specifed and directed.

S/F PVC Board 30 x 25 x 5 Cm depth complete all as specified and directed.

S&F MCCB 125 Amp 10 KA F/P complete all as specifed and directed.

S&F MCCB 200 Amp 25 KA F/P complete all as specifed and directed.

S&F MCCB 250 Amp 36 KA F/P complete all as specified and directed.

S&F MCB single pole and neutral 35 to 63 Amps, 10 KA rating , 240 Volts complete all as specified and directed.

S&F MCB single pole and neutral 32 Amps 10 KA rating , 240 Volts

S&F MCB Single Pole 05 to 30 Amps 10 KA rating , 240 Volts complete all as specified and directed by the Engr-in-charge.

S&F MCB Triple pole and neutral 32 Amps 10 KA rating , 415 Volts complete all as specified and directed by the Engr-in-charge.

S&F MCB Triple pole and neutral 63 Amps, 10 KA rating , 415 Volts complete all as specifed and directed.

S&F MCB Triple pole 32 to 63 Amps 10 KA rating , 415 Volts complete all as specifed and directed.

Taking down old unserviceable service cable from and including battens/ suspending wires complete all as specifed and directed

S&F Service wire PVC insulated and PVC sheathed stranded Aluminium conductor 10 sq mm two core fixed to walls or suspended by insulating hanger not more than one meter apart including 4mm dia GI suspension wire and binding with 2mm dia new GI wire with reel insulator complete and including taking down old un serviceable one complete all as specified and directed.

M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 6 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC conduit with all fitting and fixing accessories and including PVC RMinsulated unsheathed, multistranded copper conductor cable of size 4 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring complete all as specified and directed.

M&L for sub-main wiring with two single core FRLS PVC insulated, unsheathed, multistranded copper conductor cable of size 4 sqmm 1100 volts grade and including non metallic rigid 25 mm dia PVC conduit with all fitting and fixing accessories and including PVC insulated unsheathed, multistranded copper conductor cable of size 2.5 sqmm for earth continuity conductor and including taking down old unserviceable sub main wiring complete all as specified and directed.

S&F Exhaust fan 300 mm sweep, 230V complete with metal body frame and necessary connection from ceiling rose to fan complete all as specified and directed.

S&F Wall mounting fan 400 mm sweep with pull ON-OFF cord, 3 speed option with swing oscillation control wide 90 deg sweep angle with wall mounting bracked complete all as specified and directed.

Supply and fixing ceiling fans 1200 mm sweep,3 blade with 5starstandard standard super silent motor including provision of 3 core flexible copper conductor cable of size 23/0.19 from ceiling rose to ceiling complete all as specified and directed.

S&F storage type water heater 25 Ltrs five star rated including fixing materials and connecting up incoming and out going pipe lines & cables etc complete all as specified and directed.

S&F fan hook of suitable size for hanging of ceiling fan made up of MS flat iron of size 50mm x 6mm including nut bolts washers complete all as specified and directed.

S&F in repair sheet metal enclosure with socket plug top and MCB single pole and neutral with two pin and earth plug with one SP MCB 20 Amp 240 volt complete all as specified and directed.

S&F in repair electronic LED driver suitable for 36 watt for LED light fitting complete all as directed.

S&F in repair electronic LED driver suitable for 7 to 18 watt for LED light fitting complete all as specified and directed.

Supply only insultion tape 15 to 25 mm 25 Mtr long complete all as specified and directed.

Supply only plug top 15A, 240 volts complete all as specified and directed.

Supply only top 5A, 240 volts complete all as specified and as directed

Supply only LED Lamp 12 watt complete all as specified and as directed

Supply only LED Lamp E 27 type 10 watt complete all as specified and as directed

Supply only call bell, Ding dong type, 230 volts AC single pole complete all as specified and as directed.

Supply only bell push 6 A 1 module complete all as specified and as directed

Supply only electronic fan regulator, complete all as specified and as directed

Supply only 6 amps single pole switch one way complete all as specified and as directed

Supply only socket outlet 2/3 pin 6 Amps combined 2 module complete all as specified and as directed

Supply only socket outlet 6A/1 -6 A2/3 pin combined 2 module complete all as specified and as directed.

Supply only white modular cover plate with frame for fixing of modular switches of following :- (a) 2 module complete all as specified and as directed

Ditto but 3 module complete all as specified and as directed

Ditto but 4 module complete all as specified and as directed

Ditto but 6 module complete all as specified and as directed

Ditto but 8 module complete all as specified and as directed

S& F in repair blank speacer plate for single module complete all as specified and as directed

Supply and fixing & replacement of 20 Watt 6500K LED batten 2000lumens fitting with extruded aluminium housing four feet with integrated LED & electronic driver and all accessories pre-wired including connecting up complete all as specified and as directed.

Supply and fixing & replacement recessed mounted 3600lumens, 6500K, 2'x2' LED ceiling light fitting with 60mm width CRCA body, opal acrylic diffuser, electronic driver, system life 50000hrs@L70%, PF 0.95, THD <10%, CRI >80,etc and all accessories pre-wired includingconnecting up complete all as specified and as directed.

SSupply and fixing & replacement of LED mirror light fitting, 10 Watt, 1000 lumens 6500K comprises of aluminium extruded channel, frosted diffuser, integrated electronic driver, IP 20 protection and all accessories pre-wired including connecting up complete all as specified and as directed.

Supply and fixing LED attractive and decorative strip type Warm lights 11/15 watts,system Lumen Efficiency>110 Lm/W operating voltage between 140-270 Vac, power factor more thn 0.90% LED driving current<70% of rated maximum forward current, THD less than 20% CRI more than 80%,Luminaire intergal driver with 2 KV surge protection, overload protection,No load protection and BIS marking (Ref no for Driver),Driver certification IEC6437-2-13 IS (15885) Over all electrical Eficiency more than 90%, driver electrical efficiency will be>85%..(Note:- Each strip have minimum 5 Mtr lambai, seperate led driver and seperate point wiring. The point wiring and swithes measured seperately.) complete all as specified and as directed

Supply and fixing & replacement of Recess mounted round LED downlight 10-12Watt, 1000lumens, 6500K comprises of aluminium die cast housing, frosted diffuser, integrated electronic driver, IP 20 protection, complete all as specified and as directed

Taking down and replacement of any type/size of the following parts for geysers 50/25 Ltrs capacity, complete all as specified and as directed.

S & f in replacement Heating element 2 KW suitable for operation on 230V AC 50Hz complete all as specified and as directed

S & f in replacement Heating element 1.5KW suitable for operation on 230V AC 50Hz complete all as specified and as directed

S & f in replacement Thermostat 40 to 90 degree centigrade varying capactiy for 25/50 Ltrs capacity Geyser complete all as specified and as directed

S & f in replacement Pressure release valve dead weight type for 25/ 50 Ltrs capacity Geyser, complete all as specified and as directed

S & f in replacement Gasket set for 50 litres capacity Geyser complete all as specified and as directed

S & f in replacement Gasket set for 25 Ltrs capacity Geyser.complete all as specified and as directed

S&F PVC connections 15 mm size(for hot water and cold water) with PTMT nuts of length 450 mm long complete all as specified and as directed

S&F stop valves 15mm cast copper alloy screwed down high pressure with crutch or butterfly handle screwed botyh ends for iron pipe or for unions and fixed complete all as specified and as directed

Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground (earth pit not less than 3.5 mtr deep below normal ground level) with top edge of plate of not less than 1.5 mtr below normal ground level, connecting to the GI wire 4.0mm dia by means of bolts, nuts, check nuts and washer of GI and earth wire protection by provision of GI light grade pipe 15mm bore incl provn of concrete pite in PCC (1:2:4) type B-1 using 20mm graded stone aggregates with 40mm thick cover of RCC(1:2:4) reinforced with XPM (weight not less than 4 kg/sqm) and frame of agle iron 25 x 25 x 6mm with 02 nos lugs and handle made of 6mm dia MS bar made to shape. GI light grade 20mm bore pipe for watering, erforated at bottom, 1.75 mtr long placed on top edge of earth plate, charcoal and common salt filling, test point made out of 75 x 50 x 3 mm phosporouse bronze with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning filling in and removal of surplus soil to a distance not exceeding 50 mtr, all as per electric plate No 5 of SSR Part -I and connecting to earth test point all as specified incl testing on completion complte all as specifed and directed by Engg-in Charge

BRIJ CONSTRUCTIONS

NAVEEN ENGINEERS AND CONSULTANTS

KAPOOR ELECTRICALS

AK Construction Co

Bedi Refrigeration Works