EC COM Webel Bhavan Civil Maintenance 25 26 81

Amount

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra concrete. With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Deep Colour & White. (Fixing may be done on floor, skirting, riser, tread etc.) (Any size / Any color as decided by the WBEIDC Engineer.) (All floors). Approved brand Kajaria, Nitco, Johnson, Somany or any other brand as approved by WBEIDCL.

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]. The rate is inclusive for prefinished, grinding and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. (Fixing may be done on floor, skirting, riser, tread etc.)(Any size as decided by the WBEIDC Engineer.) (All floors)

Supplying, fitting & fixing 1st quality Ceramic tiles in floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Coloured decorative or White (Johnson / Kajaria / NITCO / Somany), at all floors.

Removal of rubbish,earth, garbage (dry or wet), dismantled toilet fixtures, trees, grasses etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Applying interior grade Acrylic primer & Acrylic Emulsion paint, including putty, of approved quality & brand on plaster or concrete surface old or new surface including scraping & preparing the surface throughly, complete as per manufacturer's specification & as per direction of EIC. (Solvent based interior grade Acrylic Primer & Paint is standard Quality). (One coat of primer + Two coats of paint). (ICI / Asian Paint or any other brand as approved by WBEIDCL).

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. & Painting 2 coats of any shades (as decided by the WBEIDCL Engineer) on steel & metal surface with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (ICI / Asian Paint or any other brand as approved by WBEIDCL).

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Major repairing & refixing of False Ceiling with existing materials made of G.I. Frame structure & Gypsum Board tiles having stated specification . Struacture : Pre-coated main Tees shall be suspended from RC slab soffit at 600 mm c/c with the help of soffit cleat, bullets, GI angles & GI wire of 6 mm dia (hanger rod). Fixing point : For suspending the metal grid should be @ 1220 mm c/c & 600 mm apart. Pre-coated cross Tee section snap fixed at 600 mm / 1200 mm to form 600 mm x 600 mm & 600 mm x 1200 mm grid respectively.

Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). At any floor & any location. Armstrong, Gypstone, Lafarge-Boral Gypsum India P. Ltd.(La-gyp), Saint-Gobain Gyproc India ltd.(India Gypsum Ltd.), Ramco Hilux Calcium Silicate Board & Tiles (Ramco Industries Ltd.), Gypstone Building Products P. Ltd., Aerolite Ceiling Systems, R. K. Ceilings pvt. Ltd, Everest Industries Ltd. The rate is inclusive of necessary rectification of the false ceiling frame work, if required.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid. T-2430). At any floor & any location.

Godrej Hydraulic door closer fitted and fixed complete. Heavy type (I.S.I. size 3). (The rate is inclusive of dismantling / taking out of the existing one)

Hydraulic door closer of approved quality as per I.S.I. standard fitted and fixed complete. Heavy type (I.S.I. size 3)

Anodised aluminium Aldrop / Sliding bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 2681/66) fitted and fixed with cadmiim plated screws. 250mm x 16mm dia bolt. (The rate is inclusive of dismantling / taking out of the existing one).

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 150 mm grip x 12 mm dia rod. (The rate is inclusive of dismantling / taking out of the existing one)

Taking out shutter of aluminium glass door / window or wooden door, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supply, fitting & fixing of Door stopper.(Brass). (The rate is inclusive of dismantling / taking out of the existing one)

Supply, fitting & fixing of Door stopper.(Aluminium). (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge. (The rate is inclusive of dismantling / taking out of the existing one)

Repairs to floor spring including removal and rehanging of shutters, replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same.

Supplying, fitting & fixing concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. 200 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing of Godrej Multi Lock or equivallent.

Supplying of 'Godrej' multipurpose lock / cabinet lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying of 'Godrej' cylindrical lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supply & installation of lock for steel almirah. The rate is inclusive of replacement of old / damaged lock system entirely with the new one. As per approved brand.

Supply & installation Top patch with pivot. The rate is inclusive of carefully removal of old Top patch pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supply & installation Bottom patch lock. The rate is inclusive of carefully removal of old Bottom patch lock from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supply & installation Top & Bottom pivot for floor spring. The rate is inclusive of carefully removal of old pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 12 mm. Approved brand 'CenturyPly' & 'GreenPly'.

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.0 mm. Approved brand 'CenturyLaminate' & 'GreenLam' or any other brand as approved by WBEIDCL.

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supply & installation of stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 300 mm long

Supply & installation of stainless steel handle for casement window as per approved brand as directed by Engineer- in -charge. (Natural White).

Supply, fitting & fixing of wheel of revolving chair. The rate is inclusive of removal of existing wheel from the chair. Brand Godrej.

Supply, fitting & fixing of handle of revolving chair. The rate is inclusive of removal of existing handle from the chair.

Supply, fitting & fixing of hydraulic of revolving chair. The rate is inclusive of removal of existing hydraulic from the chair. Brand Godrej.

Supply, fitting & fixing of seat & back cover (clothes) for Multi task / Revolving / Executive chairs, using approved cloths. The rate is inclusive of removing the old clothes if required.

Supply & installation for 18 gauge brass plate, name / matter eaching as per our requirement.

Supply & fixing clear acrylic sheets plate back side vinyl cutting & pasting as per your matter.

Supply, fitting & fixing of venetian blind / roller blind with necessary frame work. At any floor & any loaction. The rate is inclusive of removal of existing blind if required. Brand, color, model, design will be decided by WBEIDCL.

Supplying, fitting and fixing bib cock or stop cock. Chromium plated Angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). (The rate is inclusive of dismantling / taking out of the existing one)

Closed seat of approved make with lid & C.P. Hinges, rubber buffer & brass screws supplied, fitted & fixed complete. Plastic (hollow type) Black or white or color matched with the WC. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted and tested to 21kg per sq. cm. 15 mm.

Supplying,fitting and fixing cast iron 'P' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm

Supplying,fitting and fixing cast iron 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm

Supply, fitting & fixing of Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). The rate is inclusive of removal of old one.

Supply, fitting & fixing of CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No. 5041 & Model - FLORENTINE of JAQUAR or similar brand) & removal of old one.

Supplying, fitting and fixing Flat back urinal in white vitreous chinaware of approved make (Parryware or Hindware) in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, Model: Capriana, cat no: S4020112 or equivalent).

Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, model: CHIVAS, cat no B1010104.)

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. ('P' or 'S' trap). (The rate is inclusive of dismantling / taking out of the existing one). (Brand : CERA, Parryware, Hindware, CONVENTIONAL Ivory / white in colour)

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 15 mm.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 20 mm.

Supplying, fitting and fixing CPVC (Chlorinated Polyvinyl Chloride) pipes of approved make conforming to IS-15778: 2007 . with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. For Concealed Work. CPVC Pipes Class-1,SDR-11. 25 mm.

Refixing G.I. pipe with fittings after cleaning where necessary. 15 mm / 20 mm / 25 mm

Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting & fixing Aluminium domical grating. 100 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 65 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 15 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supply fitting and fixing U.P.V.C. pipes for above ground work (soil/ wastewater line) including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages including the cost of masonry or concrete work, if necessary and cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. UPVC pipes (B Type) (dismantling of old C. I. fittings and disposal included) & fittings conforming to IS-13592-1992, (Make: Supreme). Dia 110 mm

Supply & installation of plastic soap dispenser. (400 ml capacity). Model, make & design will be decided by WBEIDCL.

Cleaning, removing of mud and disinfecting above 2000 litre Water Tank with appropiate method,including masonry reservoir. The rate is inclusive of dewatering reservoir / tank using pump before starting of the job.

Moni Bhandar Building

Stripping off worn out plaster and raking out joints of walls, celings etc. upto any height and in any floor including removing of rubbish beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Dismantling all types of masonry, cement concrete plain or reinforced, stacking serviceable materials at site and removing of rubbish beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge. At any floor & any location.

Brick work with 1st class bricks in cement mortar (1:6). All floors & all types od structures. (Any floors & any location).

125 mm. thick brick work with 1st class bricks in cement mortar (1:4) in ground floor. (Any floors & any location)

Plaster (to wall, floor, ceiling etc.) with sand & cement morter incl. Rounding off or chamfering corners as directed & raking out joints or roughening, nosing & drip course where necessary to all floors. With 1:6 cement sand morter. 15 mm thick plaster. At any floor & any location.

Supplying and laying true to line and level vitrified tiles of approved brand (size not less than 600 mm X 600 mm X 10 mm thick) in floor, skirting etc. set in 20 mm sand cement mortar (1:4) and 2 mm thick cement slurry back side of tiles using cement @ 2.91Kg./sqM or using polymerised adhesive (6 mm thick layer applied directly over finished artificial stone floor/Mosaic etc without any backing course) laid after application slurry using 1.75 Kg of cement per sqM below mortar only, joints grouted with admixture of white cement and colouring pigment to match with colour of tiles / epoxy grout materials of approved make as directed and removal of wax coating of top surface of tiles with warm water and polishing the tiles using soft and dry cloth upto mirror finish complete including the cost of materials, labour and all other incidental charges complete true to the manufacturer's specification and direction of Engineer-in-Charge.(White cement, synthetic adhesive and grout material to be supplied by the contra concrete. With application slurry @1.75 kg/ Sq.m, 20 mm sand cement mortar (1:4) & 2 mm thick cement slurry at back side of tiles, 0.2 kg/ Sq.m white cement for joint filling with pigment. Deep Colour & White. (Fixing may be done on floor, skirting, riser, tread etc.) (Any size / Any color as decided by the WBEIDC Engineer.) (All floors). Approved brand Kajaria, Nitco, Johnson, Somany or any other brand as approved by WBEIDCL.

18 mm. to 22 mm. thick, kota stone slab set in 20 mm thick (avg) cement mortar (1:4) in floor, stair & lobby including pointing in cement slurry with admixture of pigment matching the stone shade, including grinding & polishing as per direction of Engineer - in - charge to match with the existing work. [Slurry for bedding @ 4.4 kg/Sq.m and pointing @2.0 kg/Sq.m]. The rate is inclusive for prefinished, grinding and premoulded Nosing to treads of steps, railing, window sill etc. of Kota Stone. (Fixing may be done on floor, skirting, riser, tread etc.)(Any size as decided by the WBEIDC Engineer.) (All floors)

Supplying, fitting & fixing 1st quality Ceramic tiles in floors to match with the existing work & 4 nos. of key stones (10mm) fixed with araldite at the back of each tile & finishing the joints with white cement mixed with colouring oxide if required to match the colour of tiles including roughening of concrete surface, if necessary or by synthetic adhesive & grout materials etc. With Sand Cement Mortar (1:4) 20 mm thick & 2 mm thick cement slurry at back side of tiles using cement @ 2.91 Kg/Sq.m & joint filling using white cement slurry @ 0.20kg/Sq.m. Coloured decorative or White (Johnson / Kajaria / NITCO / Somany), at all floors.

Removal of rubbish,earth, garbage (dry or wet), dismantled toilet fixtures, trees, grasses etc. from the working site and disposal of the same beyond the compound, in conformity with the Municipal / Corporation Rules for such disposal, loading into truck and cleaning the site in all respect as per direction of Engineer in charge.

Applying interior grade Acrylic primer & Acrylic Emulsion paint, including putty, of approved quality & brand on plaster or concrete surface old or new surface including scraping & preparing the surface throughly, complete as per manufacturer's specification & as per direction of EIC. (Solvent based interior grade Acrylic Primer & Paint is standard Quality). (One coat of primer + Two coats of paint). (ICI / Asian Paint or any other brand as approved by WBEIDCL).

Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. & Painting 2 coats of any shades (as decided by the WBEIDCL Engineer) on steel & metal surface with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary. (ICI / Asian Paint or any other brand as approved by WBEIDCL).

Rendering the surface of walls and ceiling with white cement based wall putty of approved make and brand(1.5mm thick)

Major repairing & refixing of False Ceiling with existing materials made of G.I. Frame structure & Gypsum Board tiles having stated specification . Struacture : Pre-coated main Tees shall be suspended from RC slab soffit at 600 mm c/c with the help of soffit cleat, bullets, GI angles & GI wire of 6 mm dia (hanger rod). Fixing point : For suspending the metal grid should be @ 1220 mm c/c & 600 mm apart. Pre-coated cross Tee section snap fixed at 600 mm / 1200 mm to form 600 mm x 600 mm & 600 mm x 1200 mm grid respectively.

Supplying, fitting & fixing High Pressure steam Cured Non Asbestos fibre cement standard ceiling board (Density > 1300Kg per Cu.m. ) of size595mm X595mm conforming IS 14862 and type B, catagory III of ISO 8336, tested as per AS-1530 Part 3 and BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a false ceiling all complete as per drawing & direction of Engineer - in- Charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid T-2430). At any floor & any location. Armstrong, Gypstone, Lafarge-Boral Gypsum India P. Ltd.(La-gyp), Saint-Gobain Gyproc India ltd.(India Gypsum Ltd.), Ramco Hilux Calcium Silicate Board & Tiles (Ramco Industries Ltd.), Gypstone Building Products P. Ltd., Aerolite Ceiling Systems, R. K. Ceilings pvt. Ltd, Everest Industries Ltd. The rate is inclusive of necessary rectification of the false ceiling frame work, if required.

Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid T 2430 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 6 mm thick High Pressure Steam Cured Non Asbestos Fibre Cement Standard Ceiling Board (Density > 1300 Kg/m3) of size 595 mm X 595 mm, conforming IS 14862 & Type B Category III of ISO 8336, tested as per AS-1530 part 3 & BS-476 Part 4,5,6,7 & 8, should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. False Ceiling (with 6mm thick Fibre Cement Standard Ceiling Board and E-Grid. T-2430). At any floor & any location.

Godrej or equivalent Hydraulic door closer fitted and fixed complete. Heavy type (I.S.I. size 3). (The rate is inclusive of dismantling / taking out of the existing one)

Anodised aluminium Aldrop / Sliding bolt of approved quality manufactured from extruded section conforming to I.S: specification (I.S: 2681/66) fitted and fixed with cadmiim plated screws. 250mm x 16mm dia bolt. (The rate is inclusive of dismantling / taking out of the existing one).

Anodised aliminium D-type handle of approved quality manufactured from extruded section conforming to I.S. specification (I.S. 230/72) fitted and fixed complete: 150 mm grip x 12 mm dia rod. (The rate is inclusive of dismantling / taking out of the existing one)

Taking out shutter of aluminium glass door / window or wooden door, dismantling by parts (for repair or replacement of damaged parts), reassembling and refitting and rehanging same with old fittings but with new screws as necessary.

Supplying 'Godrej' mortice lock chromium plated with keys 6 levers including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supply, fitting & fixing of Door stopper.(Brass). (The rate is inclusive of dismantling / taking out of the existing one)

Supply, fitting & fixing of Door stopper.(Aluminium). (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting fixing Godrej type hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-in-charge. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting fixing I.S.I. approved quality and brand hydraulic (oil check) floor door spring, heavy duty double action with brass shoe, brass top centre aluminium top cover etc. complete set as per direction of Engineer-incharge. (The rate is inclusive of dismantling / taking out of the existing one)

Repairs to floor spring including removal and rehanging of shutters, replacement of damaged main spring, oiling and adjusting as necessary including taking out and refitting the same.

Supplying, fitting & fixing concealed type heavy duty PVC headed aluminium tower bolt for double leaf doors as per approved make and brand as per direction of Engineer-in-Charge. 200 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing of Godrej Multi Lock or equivallent.

Supplying of 'Godrej' multipurpose lock / cabinet lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying of 'Godrej' cylindrical lock including fitting & fixing complete. (The rate is inclusive of dismantling / taking out of the existing one)

Supply & installation of lock for steel almirah. The rate is inclusive of replacement of old / damaged lock system entirely with the new one. As per approved brand.

Supply & installation Top patch with pivot. The rate is inclusive of carefully removal of old Top patch pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supply & installation Bottom patch lock. The rate is inclusive of carefully removal of old Bottom patch lock from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supply & installation Top & Bottom pivot for floor spring. The rate is inclusive of carefully removal of old pivot from the rimless door & replace with new one. Approved brand Godrej or any other brand as approved by WBEIDCL.

Supplying, fitting and fixing boiling water resistant ply conforming to IS: 303, 1989 bonded with phenol formaldehyde synthetic resin of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-inCharge. 12 mm. Approved brand 'CenturyPly' & 'GreenPly'.

Supplying fitting, fixing decorative lamination conforming to IS: 2046 : 1995 as per approved make, brand, finish and thickness with fitting, fixing the same on Particle / MDF / Ply Boards with recommended / approved adhesive with proper clipping the sides for better attachment as per direction of Engineer-incharge.The rate includes the cost of labour, adhesive and all incidental charges thereof. Glossy/Matt/Suede excluding surface texture or metallic lustre. Thickness of laminate 1.0 mm. Approved brand 'CenturyLaminate' & 'GreenLam' or any other brand as approved by WBEIDCL.

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 4 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 5 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supplying & fixing bubble free float glass of approved make and brand conforming to IS: 2835-1987. 6 mm thick clear glass. (The rate is inclusive of removing of the old / breakage glass)

Supply & installation of stainless steel functional hinge for casement window as per approved brand as directed by Engineer- in -charge. (Natural White). 300 mm long

Supply & installation of stainless steel handle for casement window as per approved brand as directed by Engineer- in -charge. (Natural White).

Supply, fitting & fixing of wheel of revolving chair. The rate is inclusive of removal of existing wheel from the chair. Brand other than Godrej.

Supply, fitting & fixing of handle of revolving chair. The rate is inclusive of removal of existing handle from the chair.

Supply, fitting & fixing of hydraulic of revolving chair. The rate is inclusive of removal of existing hydraulic from the chair. Brand other than Godrej.

Supply, fitting & fixing of seat & back cover (clothes) for Multi task / Revolving / Executive chairs, using approved cloths. The rate is inclusive of removing the old clothes if required.

Supply & installation for 18 gauge stainless steel plate, name / matter eaching as per our requirement.

Supply & fixing clear acrylic sheets plate back side vinyl cutting & pasting as per your matter.

Supply, fitting & fixing of venetian blind / roller blind with necessary frame work. At any floor & any loaction. The rate is inclusive of removal of existing blind if required. Brand, color, model, design will be decided by WBEIDCL.

Supplying, fitting and fixing bib cock or stop cock. Chromium plated Angular Stop Cock with wall flange (Equivalent to Code No. 5053 & Model - Florentine of Jaquar or similar brand). (The rate is inclusive of dismantling / taking out of the existing one)

Closed seat of approved make with lid & C.P. Hinges, rubber buffer & brass screws supplied, fitted & fixed complete. Plastic (hollow type) Black or white or color matched with the WC. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing alloy iron with brass spindle bib cock / stop cock of approved brand and make, spray painted and tested to 21kg per sq. cm. 15 mm.

Supplying,fitting and fixing cast iron 'P' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm

Supplying,fitting and fixing cast iron 'S' trap conformimg to I.S. 3989 / 1970 and 1729 / 1964 including lead caulked joints and painting two coats to the exposed surface. 100 mm

Supply, fitting & fixing of Hand Shower (Health Faucet) with 1mtr Fexible Tube with Wall Hook (Equivalent to Code No.573 & Model -ALLIED of Jaquar or similar). The rate is inclusive of removal of old one.

Supply, fitting & fixing of CP 2-way bib Cock - 15 mm, supplied, fitted and fixed. (Code No. 5041 & Model - FLORENTINE of JAQUAR or similar brand) & removal of old one.

Supplying, fitting and fixing Flat back urinal in white vitreous chinaware of approved make (Parryware or Hindware) in position with brass screws on 75 mm X 75 mm X 75 mm wooden blocks complete. 635 mm X 395 mm X 420 mm. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, Model: Capriana, cat no: S4020112 or equivalent).

Supplying, fitting and fixing 10 litre white glazed vitreous chinaware of approve low-down cistern of approved make with either side or bottom inlet, side overflow, brackets complete with all internal fittings. (Brand : CERA, Parryware, Hindware, Ivory / white in colour, model: CHIVAS, cat no B1010104.)

Supplying, fitting and fixing E.W.C. in white glazed vitreous chinaware of approved make complete in position with necessary bolts, nuts etc. ('P' or 'S' trap). (The rate is inclusive of dismantling / taking out of the existing one). (Brand : CERA, Parryware, Hindware, CONVENTIONAL Ivory / white in colour)

Supplying, fitting and fixing bevelled edged mirror 5.5 mm thick silver red as per I.S. 3438 / 1965 together with brass C.P. hinges. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). (For Exposed Work - 25 mm dia. medium quality)

Supplying, fitting and fixing G.I. pipes of TATA make with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew, reducing socket, reducing tee, short piece etc. fitted with holder bats clamps, including cutting pipes, making threads, fitting, fixing etc. complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials.). (For Exposed Work - 15 mm dia. medium quality)

Labour for dismantling G.I. pipe with fittings. 15 mm / 20 mm / 25 mm

Refixing G.I. pipe with fittings after cleaning where necessary. 15 mm / 20 mm / 25 mm

Supplying,fitting and fixing approved brand 32 mm dia. P.V.C. waste pipe, with PVC coupling at one end fitted with necessary clamps. 900 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying,fitting and fixing approved brand P.V.C. CONNECTOR white flexible, with both ends coupling with heavy brass C.P. nut, 15 mm dia. 450 mm long. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting & fixing Aluminium domical grating. 100 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 100 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 80 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 65 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 50 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 40 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 32 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 25 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 20 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supplying, fitting and fixing gunmetal wheel valve of approved brand and make tested to 21 kg per sq. cm. (for water lines only). 15 mm. (The rate is inclusive of dismantling / taking out of the existing one)

Supply fitting and fixing U.P.V.C. pipes for above ground work (soil/ wastewater line) including cost of jointing materials etc. fitting and fixing all necessary specials, cutting pipes, cutting holes in walls or R.C. floor where necessary and mending good all damages including the cost of masonry or concrete work, if necessary and cost and fitting and fixing holder bat clamps (any floor) or for underground work including cutting trenches upto 1.5 metre and refilling the same complete as per direction of the Engineerin-charge. (Payment will be made on centre line measurement of the total pipeline including specials. UPVC pipes (B Type) (dismantling of old C. I. fittings and disposal included) & fittings conforming to IS-13592-1992, (Make: Supreme). Dia 110 mm

Supply & installation of plastic soap dispenser. (400 ml capacity). Model, make & design will be decided by WBEIDCL.

RAJA CONSTRUCTION (BID ID -6853411)