REPAIR MAINTENANCE OF SERVICE CONNECTION, DISTRIBUTION BOARD,BUILDING SUB MAIN,EARTHING AND ALLIED WORKS FOR MARRIED,OTM ACCOMMODATION AT EAST AREA UNDER GE DEHU ROAD.

Amount

Taking down unserviceable service connection cable of any type any size from ground,floor,overhead complete all as directed

Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 16 Sqmm 2 core .Make: Polycab,Havells

Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 16 Sqmm 4 core .Make: Polycab,Havells

Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 25 Sqmm 4 core .Make: Polycab,Havells

Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 35 Sqmm 3.5 core.Make: Polycab,Havells

Suppy and laying XLPE insulated, armoured, heavy duty electric cable with aluminium conductor, 1100 volt grade, cross sectional area 70 Sqmm 3.5 core.Make: Polycab,Havells

M&L in repair HDPE-DWC Pipe ISI Marked laying for protection of cable of size 40mm all as directed.

Taking down unserviceable DB of any capacity and making good disturbed surface of wall/floor complete all as specified all as directed.

S & F Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 8 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed.,Make : Bentec/Havells / Legrand

S & F Distribution board, SP&N vertical ,Prewired ,Netural links,blanking plates ,single door 6 way, with provision for MCB SP&N as incommer and SP/DB MCB as outgoing and electrically connecting up complete all as specified and directed. Make : Bentec/Havells / Legrand

Supply and installed outdoor main control feeder pillar box for storage shade with IP-55 protection,made with 3mm sheet with 40 mm angle iron fram, suitable for installed arrangement 100/160 Amps MCCB as incommer,out going 40 Amps MCB SP&N=05 Nos with copper busbar made with 30mmx6mm copper strip on distribution board having front opening with proper locking arrangement, complete all as specified and directed.Note: (a) MCCB/MCB will measure in respective items of schedule "A". (b) Rate included the Copper bus bar.

Taking down unserviceable MCB,MCCB of any capacity and making good disturbed surface of wall/floor complete all as specified all as directed.

S & F MCB SP 6 to 32 Amps 240 volts 50 HZ having 10 KA complete.Make : Havells / Legrand/ L&T

S & F MCB SPN 40 Amps 240 volts 50 HZ having '10 KA complete.Make : Bentec/Havells / L&T/Legrand

S & F MCB DP 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / L&T/Legrand

S & F MCB TPN 40 Amps 240 volts 50 HZ having 10 KA complete.Make : Bentec/Havells / Legrand

S & F MCCB ,TPN,415 Volt AC 50HZ 100 Amps , adjustable braking capacity 10KA complete all as directed.Make : Bentec/Havells / Legrand

Taking down unserviceable busbar box supply and fixing PVC heat radiant bus bar box of size 300 mm x 325 mm x 214 mm, IP-65 fitted with 100 Amps 04 no copper strip of size 30x6mm complet all as directed. .Make : Hensel

Taking down unserviceable Meter box including all fixture complete Supply and installed meter box made with PVC heat radiant suitable for fixing arrengement of electric meter 04 Nos and one MCCB 100 Amps TPN as incommer,Four out going MCB SPN 40 Amps ,IP-65 fitted with 04 no copper strip of size 30x6mm included necessary connection arrangement with suitable size of copper flexible cable from MCCB to Busbar and Busbar to MCB,Meter complet all as directed. .Make : Hensel.Cost included the MCCB,MCB Busbar,The existing meter will installed in the meter box.

Taking down existing unserviceable aluminum / copper point wiring of any description & in any position including all fitting and making good the disturbed surface to match with the existing surfaces complete all as specified and directed.

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 2.5 sqmm, 1100 volt grade conforming to IS drawn in PVC coduit 20 mm dia including one single core PVC insulated multi stranded unsheathed copper conductor cable, 2.5 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.

Material & Labour for Sub main wiring at any height with 2 single core PVC insulated, multi stranded copper conductor cable (FRLSH), unsheathed, 4.0 sqmm, 1100 volt grade conforming to IS drawn in PVC coduit 20 mm dia including one single core PVC insulated multi stranded unsheathed copper conductor cable, 4.0 sqmm,, FRLSH green in colour as continuous earth wire including all accessories and fixing arrengements, supporting clamps, bends, sockets and connecting items etc. all as specified and directed.

M & L for Cross arms, bracings, supports, clamps and back plates fabricated from structural steel sections including nuts, bolts, washers, welding, bending colt or hot, drilling holes for bolts, at any height, in any shape or size as indicated or directed and inclusive of one primer coat, one under coat and one finishing coat of paint for mounting Air Circulator / Exhaust Fan / Ceiling Fan/highbay fittings etc for fixing arrangements complete.

M & L for PCC (1:3:6) type C-2 (using 40 mm graded stone aggregate) as in foundation of stay assembly, poles, struts etc complete.

M&L for cement concrete 1:4:8 type D-2 using 40 mm graded aggregate as in foundation for pole including necessary form work all as specified and directed

M&L Rendering 10 mm thick in cm 1:4 on other than fair faces of brick work or concrete surfaces.

Excavation in trenches n.exc 1.5 mtr wide and n exc 1.5 mtr in depth and getting out in soft/ loose soil for laying cables / GI pipe, foundation of pole, stay etc complete all as specified and as directed .

Returning, filling in including spreading, levelling, watering and well ramming in layers n.exc 25 cm in soft/loose soil complete all as specified and as directed.

Removing surplus excavated soil n.exc 50 mtr and depositing where directed at a level n.exc 1.5 mtr above the starting point complete all as specified and as directed.

Taking down unserviceable energy and deposited to MES store yard and supply and fixing energy meter single phase and deposited to MES store yard Supply and fixing electrronic energy meter single phase four wire current carring 05-30 Amps,230 volt,50 Hz.Make :L&T, Bentec/Havells / Legrand

Taking down unserviceable energy and deposited to MES store yard and supply and fixing energy meter three phase and deposited to MES store yard Supply and fixing electrronic energy meter single phase four wire current carring 05-30 Amps,230 volt,50 Hz.Make :L&T, Bentec/Havells / Legrand

Taking down unserviceable light fitting,supply and fixing Inverter LED batten 20 watt with square profile and polycarbonate channel. Lithium Ion battery with charging time 8 hours-10 hours and back up time upto 4 hours..Make:-Philips,Havells,wipro

Taking down unserviceable any light fitting,supply and installed Smart Integrated Solar All In One solar street light 20 watt with range up to 12000 lumen with inbuilt lithium ferro phosphate batteriesw, Mono crystalline solar panel, and MPPTcharge controller including necessary arrangement for fixing light fitting on pole with bracket complet all as directed. MAKE :- Philips Model No-BRP111LED20/757 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed Smart Integrated Solar All In One solar street light 30 watt with range up to 12000 lumen with inbuilt lithium ferro phosphate batteriesw, Mono crystalline solar panel, and MPPTcharge controller including necessary arrangement for fixing light fitting on pole with bracket complet all as directed. MAKE :- Philips Model No-BRP111LED30/757 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed essential smart bright all in one solar street light LED 20 watt with inbuilt lithium ferro phosphate battery, solar panel,and charge built into the luminaire inbuilt microwave based motion senso for optimizing battery autonomy including necessary arrangement for fixing light fitting on pole/wall with bracket complet all as directed. MAKE :- Philips Model No-BRC010 LED 20/765 or equivalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed essential smart bright all in one solar street light LED 40 watt with inbuilt lithium ferro phosphate battery, solar panel,and charge built into the luminaire inbuilt microwave based motion senso for optimizing battery autonomy including necessary arrangement for fixing light fitting on pole/wall with bracket complet all as directed. MAKE :- Philips Model No-BRC010 LED 40/765 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed Smart Integrated Solar wall light LED 50 watt with inbuilt inbuilt lithium ferro phosphate battery, solar panel,inbuilt motion sensor, switch to change modes and lights integrated in ABS plastic housing including necessary arrangement for fixing light fitting on pole with bracket complet all as directed. MAKE :- Philips Model No-BWS010LED50/765 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed Smart Integrated Solar wall light LED 100 watt with inbuilt inbuilt lithium ferro phosphate battery, solar panel,inbuilt motion sensor, switch to change modes and lights integrated in ABS plastic housing including necessary arrangement for fixing light fitting on pole with bracket complet all as directed. MAKE :- Philips Model No-BWS010LED100/765 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed essential smart bright solar Flood light LED 09 solar flood lighting DIY kit with watt with inbuilt lithium ferro phosphate battery in the luminaire, remote controller and installation accessories including IP-65 ABC plastic construction for sturdiness incuding necessary arrangement for fixing light fitting on pole/wall with bracket complet all as directed. MAKE :- Philips Model No-BVC08LED-9/765 or equvalent make Crompton,Havells.

Taking down unserviceable any light fitting,supply and installed essential smart bright solar Flood light LED 15 solar flood lighting DIY kit with watt with inbuilt lithium ferro phosphate battery in the luminaire, remote controller and installation accessories including IP-65 ABC plastic construction for sturdiness incuding necessary arrangement for fixing light fitting on pole/wall with bracket complet all as directed. MAKE :- Philips Model No-BVC08LED-15/765 or equvalent make Crompton,Havells.

Taking down unserviceable pole and Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 31 , 09 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately)Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

Taking down unserviceable pole and Supply & erect in repair in position steel tubular pole swagged type as per IS 2713 complete with MS base plate finial tapper plug cap bolt, nut, screws etc all as specified for swaged pole of type 410 SP 55 , 11 mtrs long incl painting with two coats of aluminium paint over a coat of red oxide paint all as directed including removing existing pole. ( Note :- Excavation and earth work and PCC in foundation shall be measured and paid separately)Make : Electrosteel/ Indian Pole/ Singh Profiles/ Kalki tubes & Poles

Supply and fixing Round shape ring made with MS Strip 32 mmx 6mm round to shape suitable for fixing flood light 4/6 nos on the top of the pole, including necessary clamp , nuts and bolts complete all as directed.

Fixing only flood light 60/90/150 watt on ring of the pole all as directed.(Material Flood light will be issued by the department as free for fixing)

Supply and installed GI hot dip Galvanized pole 5 mtr, top70 mm, and bottom 135 mm ,Top 70 mm made with 3mm thick Mounting base plate 250x Plate,fix on PCC foundation with foundation bolt 700mm long 250x12 mm with four nos foundation bolts with washer of size 16mm dia and 600mm long mm bolt,including street light bracket single arm minimum expoe lenght 1.5 mtrr length from poles with pole cape complete as per manufacturer design.(PCC for foundation measured and paid in respected sch a"A" items)

Supply and installation Trivector Meter Class 0.5s,3Ph, 4W TVM 110V ( L-L) 1 A Class 0.5s BM RS 485 Modbus including suitable size/capacity CT/PT for 315 KVA transformer panel complet all as dircted.WR300BB12RS/30905.Note: (i) Necessary design for installation of CT/PT for functioning TVM with match the existing transformer is also the scope of work.(ii) All internal connection made with suitable size of cflexible copper cable. Make: L&T,Legrand.Location: Alakapuri

Supply and installation Trivector Meter Class 0.5s,3Ph, 4W TVM 110V ( L-L) 1 A Class 0.5s BM RS 485 Modbus including suitable size/capacity CT/PT for 100 KVA transformer panel complet all as dircted.WR300BB12RS/30905.Note: (i) Necessary design for installation of CT/PT for functioning TVM with match the existing transformer is also the scope of work.(ii) All internal connection made with suitable size of cflexible copper cable. Make: L&T,Legrand..Location: Alakapuri

M&L for earthing complete with galvanized steel pipe electrode 40mm bore medium grade 2.25 meters length buried directly and preferably vertically in groung with top edge not less than 1.25 mtr below the ground level connected with earthing lead 4mm dia galvanised iron or steel wire all as shown in Plate No-2 to the earthing test point allas specified and indicated including testing complet including excavation & earth work in any type of strata ,UPE earth pit made with high grade polymer compound top dia 160mm bottom dia 235mm height 230mm,funnel with water pipe , wire mesh and lugs etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground, earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5mtr below GL connected to and including 25x4 mm GI strip upto 7.5 m long by means of GI bolts, nuts, check nuts & washers and connected to earthing test point & earth dolly all as shown in electrical plate No 3 of SSR part I- (2009), earth lead protected with and including 40 mm bore GI pipe light grade and 20 mm bore medium grade watering pipe and testing on completion including excavation & earth work in any type of strata ,UPE earth pit made with high grade polymer compound top dia 160mm bottom dia 235mm height 230mm,funnel with water pipe , wire mesh and lugs etc complete all as specified and directed.

M&L for earthing complete with galvanized steel earth plate electrode 600mm x 600mm x 6mm thick burried directly in ground, earth pit not less than 2.25 meters deep below ground level with top edge of the plate not less than 1.5mtr below GL connected to and including 32x6 mm GI strip upto 7.5 m long by means of GI bolts, nuts, check nuts & washers and connected to earthing test point & earth dolly all as shown in electrical plate No 3 of SSR part I- (2009), earth lead protected with and including 40 mm bore GI pipe light grade and 20 mm bore medium grade watering pipe and testing on completion including excavation & earth work in any type of strata ,UPE earth pit made with high grade polymer compound top dia 160mm bottom dia 235mm height 230mm,funnel with water pipe , wire mesh and lugs etc complete all as specified and directed.

Taking down the copper/GI strip of any size and keeping aside the serviceable strip for reuse.

Refixing the serviceable GI strip of any size on the existing location after necessary repair all as directed.

Refixing the serviceable copper strip on the existing location after necessary repair all as directed.

Supply and fix in replacement Cupper strip of 32x6.00 mm as roof conductor and down conductor till test point all as directed.

S&F earth continuity conductor or main earthing lead of size 25x4 mm GI strip fixed to wall drawn in conduit/pipe or any other indicated situation for loop earthing etc. incl removal of old as required all as specified and directed

S&F earth continuity conductor or main earthing lead of size 32x6 mm GI strip fixed to wall drawn in conduit/pipe or any other indicated situation for loop earthing etc. incl removal of old as required all as specified and directed

Taking down the GI Pipe of any size and keeping aside the serviceable for reuse from trench,floor etc all as directed.

M&LGI pipe from trenches/floor/roof and Supply and laying GI pipe medium grade of size 40mm including necessary fitting all as directed

M&LGI pipe from trenches/floor/roof and Supply and laying GI pipe medium grade of size 50mm including necessary fitting all as directed

Supply and fixing GI pipe Medium grade from trenches/floor/roof and of size 20mm including necessary fitting all as directed

Relaying GI pipe Medium grade from trenches/floor/roof and of size 20mm including necessary fitting as obtained from item here in before all as directed

Taking down the unserviceable bib tap and supply and fixing bip tap of size 20mm made with cast copper alloy with crutch or butter fly handle, screwed down screwed for iron pipe or for brass ferrule and fixed all as directed

Supply ,Install,commissioning and testing totally enclosed LT cubicle panel board outdoor type IP-65 double door front and back sloped canopy (Hood) on top, incoming and out going feeders duly marked on revited plates etc complete factory made fabricated out of 3mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,Panel mounted on Anlge iron frame of sutable size of 50mm x 50mm x 6mm thick MS angle, 45 CM above ground level & 30 CM below gland consisting of following;- Busbar Chamber: Electrically grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incoming:- (a) MCCB 400 amps 4 pole 36 KA.DPX³ MCCB with Thermal Magnetic Protection Unit- 01 Nos.Make: Legrand,Schiender,Seimens. (Incomming from Transformer) (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481.Make: Legrand,snyder,L&T MAKE :- CAT No WC442011OOOO of. Make: Legrand,Schiender,Seimens (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 250 amps 4 pole 25 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos. Make: Legrand,Schiender,Seimens (b) MCCB 200 amps 4 pole 25 KA - 01 Nos.Make: Legrand,Schiender,Seimens (c) MCCB 125 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos.Make: Legrand,Schiender,Seimens (d) MCCB 100 amps 4 pole 16 KA - 02 Nos.Make: Legrand,Schiender,Seimens Location: Bdg HQ

Supply ,Install,commissioning and testing totally enclosed LT cubicle panel board Indoor double door front and back sloped canopy (Hood) on top, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,Panel mounted on Anlge iron frame of sutable size of 50mm x 50mm x 6mm thick MS angle, 45 CM above ground level & 30 CM below gland consisting of following;- Busbar Chamber: Electrically grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incoming:- (a) MCCB 160 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos.Make: Legrand,Schiender,Seimens (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of Make: Legrand,Schiender,Seimens (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 02 Nos.Make: Legrand,Schiender,Seimens. Location: Bdg HQl

Supply ,Install,commissioning and testing totally enclosed LT cubicle panel board outdoor double door front and back sloped canopy (Hood) on top, incoming and out going feeders duly marked on revited plates etc complete factory made fabricated out of 3mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,Panel mounted on Anlge iron frame of sutable size of 50mm x 50mm x 6mm thick MS angle, 45 CM above ground level & 30 CM below gland consisting of following;- Busbar Chamber: Electrically grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incoming:- (a) MCCB 160 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos.Make: Legrand,Schiender,Seimens (b) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of Make: Legrand,Schiender,Seimens (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 100 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 02 Nos. Make: Legrand,Schiender,Seimens (b) MCCB 63 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos Make: Legrand,Schiender,Seimens Location: KV Transformer

Supply ,Install,commissioning and testing totally enclosed LT cubicle panel board outdoor double door front and back sloped canopy (Hood) on top, incoming and out going feeders duly marked on revited plates etc complete factory made fabricated out of 3mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,Panel mounted on Anlge iron frame of sutable size of 50mm x 50mm x 6mm thick MS angle, 45 CM above ground level & 30 CM below gland consisting of following;- Busbar Chamber: Electrically grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incoming:- (a) MCCB 250 amps 4 pole 25 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 01 Nos. (b) 160 amps Change over switch. (c) Advanced Multi functional meter 4420 series LCD meter C1 with RS481 MAKE :- CAT No WC442011OOOO of L&T /Seimens/Schiender (d) LED type indication lamp for RYB. Outgoing: (a) MCCB 63 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 03 Nos. (b) MCCB 100 amps 4 pole 16 KA,DPX³ MCCB with Thermal Magnetic Protection Unit - 02 Nos. Location :COD DG Panel

Supply ,Install,commissioning and testing totally enclosed LT cubicle panel board Indoor double door front and back sloped canopy (Hood) on top, incoming and out going feeders duly marked on revited plates etc complete CPRI approved factory made fabricated out of 3mm thick CRCA sheet duly treated through 7 tank pre treatment process and painted with epoxy powder coated mat finish of SIEMENS GREY structural RAL 7032 shade colour,built in industrial type locking arrangement on front and back ,and pre wired with PVC insulated multi stranded copper conductor of suitable size for controls and monitors, PVC sleeved aluminium strip for connecting MCCBs ,Panel mounted on Anlge iron frame of sutable size of 50mm x 50mm x 6mm thick MS angle, 45 CM above ground level & 30 CM below gland consisting of following;- Busbar Chamber: Electrically grade Bus bar aluminium of capacity equal to 1.5 times of rated incoming control switch gear including interconnection of all switch gears duly insulated with colour coded heat shrinkable sleeve and mounted on suitable size of 'F' class insulators made of non hygroscopic,non combustible,track resistant high strength FRP insulators for phases and neural set of 4 for RYB &N -01 set Incoming:- (a) MCCB 63 amps 4 pole 16 KA - 01 Nos.Make: Legrand,Schiender,Seimens (b) Digital Volt Meter Make: Legrand,Schiender,Seimens.(c) Digital Amp Meter Make: Legrand,Schiender,Seimens (c) LED type indication lamp for RYB. Outgoing: (a) MCCB 40 amps 3 pole 16 KA - 02 Nos.Make: Legrand,Schiender,Seimens. (b) DOL starter for submersible Pump 7.5 HP =01 No Location: FAD

M/S kirpan Enterprises

S.M.Sales Corporation

Om Sai Enterprises

Shri Sai Electricals