In Ward 65, Bankhandinath Vatika, construction of an iron structure/civil foundation hall for a table tennis court will be done.

Supplying of Earth for cutting or in embankment in ordinary soil

Excavation in foundation in ordinary Soil (Loam, Clay or sand)

Providing and laying cement concrete in 1:6:12 (1 cement : 6 Fine sand : 12 Brick ballast 40 mm gauge)

R.C.C. work with cement,approved coarse sand and 4cm gauge stone ballast in proportions of 1:2:4 in raft and foundation excluding supply of reinforcement and its bending but including its fixing & binding the same with 24 B.W.G G.I wire and including necessary centring and shuttering etc.

R.C.C. work with cement,approved coarse sand and 4cm gauge stone ballast in proportions of 1:1.5:3 in wall and coloumn excluding supply of reinforcement and its bending but including its fixing & binding the same with 24 B.W.G G.I wire and including necessary centring and shuttering etc.

RCC 1:1.5:3 with cement c'sand stone grit of 20 mm gauge in lighter beam excluding supply of reinforcement with its bending but including its binding & fixing with supply of all meterial labour T&P etc.

Mild steel or Iron for plain work such as reinforced concrete brought to proper shape as necessary including its bending with supply of steel with overlaps & wastage also required for proper completion of the work as per E/I

First class B/w in 1:6 Cement C'sand mortor in F/P including supply of all meterial labour t&P etc required for proper completion of work

First class B/w in 1:4 Cement C'sand mortor in S/S including supply of all meterial labour t&P etc required for proper completion of work SI N0. (305+310)

12 mm thick plaster in 1:5 cement & c'sand mortor over brick work minimume thickness not less then 10 mm including all supply of meterial , Labour T&P etc

Providing and laying cement concrete in 4:2:1 of not less than strength of M-150 stone ballast (20 mm nominal size)

Fabrication of Mild steel or iron work in heavy size such as trusses, built up gates, door frames, record rack roofs, gates etc.

Providing SAL WOOD work in frames of door, window, clerestory window and other frames, wrought framed and fixed in position As per D.S.R. 9.1.2

Providing & Fixing decorative high pressure laminated sheet of plain /wood grain in gloss matt/ suede finish with high density protective surface layer and reverse side of adhesive bonding quality conforming

Providing and fixing Made of G.l. wire of dia4 mm G.l. chain link fabric fencing of required width in mesh size 50x50 including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge.

Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with Code No. Description Unit Rate ` SUB HEAD : 12 - ROOFING 205 6mm dia bolts,

Providing & fixing of 2mm thick Flat UV stabilised fiberglass reinforced plastic sheet roofing up to any pitch, including fixing with polymer coated 'J' or 'L' hooks, bolts & nuts 8mm dia. G.l

P/Laying 2mm thick plaster of paris putty for proper complition of the work as per Direction of E/I all complete

Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade on new work

Finishing walls with Acrylic Smooth exterior paint of required shade New work

Two coat painting with synthetic enamel paints on new plain surface with primer of approved quality of colour by E/I.