Repairing of B-Type (12 Unit) Staff Quarters at Pardi Dist: Valsad (Toilet Repairing Colour Work Plaster Door & Window and Miscellaneous work)

Name of Work :-

Repairing of B-Type (12 Unit) Staff Quarters at Pardi, Dist: Valsad (Toilet Repairing, Colour Work, Plaster,

Door & Window and Miscellaneous work)

Bill of Quantities

(A) Percentage Rate Tender (Up to INR 50 Cr. )

Memorandum showing items of work to be carried out

Ite Quantity Unit Estimated Total Amount

Ite Quantity Unit Estimated Total Amount

No. Item of work In figure estimated

Rs. Ps. quantities

1 Dismentaling tiled of stone floors laid in mortar including stacking of 243.0 Sqmt 48.21

serviceable materilas and disposal of unserviceable materials with all lead

2 Demolition and disposal of unserviceable materials with all lead and 2.00 cumt 609.26

lift.(i) Lime concrete.

3 Providing and laying water proofing treatment by conventional method 14.00 Sqmt 897.89

including cleaning the slab surface by wire brush as directed including

provding first layer of C.M. 1:4 of 40 mm thickness mixed with water

proofing compound at rate prescribed by manufacturer, including putting

of brick bats of average thickness 40 mm Well immerssed in water laid

uniformly on first layer of mortar including applying cement slurry @ rate

of 0.08 bag/sqm. on fixed layer of brick bats including maintaining

necessary slope, in second layer 40 mm thick C.M 1:4 mixed with water

proofing compound as directed, including finishing smooth with cement

slurry as directed complete.

4 Dismantling santtary fittings like wash basin, W.C.Pan Indian and 8.00 Nos. 405.65

European type, flushing tank etc. including stacking the materials with all

5 Dismentling C.I. pipes G.S.W.pipes abd A.C. rain water pipes with fittings 132.00 Rmt. 75.08

and clamps including stacking the materials with all lead and lift ( for any

6 Dismentling doors, windows, ventilators etc. (wood or steel) shutters 33.00 Nos. 187.71

including chowkhats architraves, holdfasts and other attachment etc.

complete and stacking them within all lead and lift.(i) Not exceeding

7 P & L 30x30 cm. Matt Finished Ceramic Tiles 6 mm thick in flooring treads 14.00 Sqmt 970.07

of steps and landing laid on a bed of 12 mm thick cement mortar 1:3(1-

cement:3-coarse sand)finishing with flush pointing in colour cement

slurry etc. complete. Colour and Shade approved by Engineer-In-Charge

8 Providing and laying coloured glazed tiles of the size 300 mm x 200 mm x 88.00 Sqmt 1441.22

8 mm / 300 mm x 450 mm x 8 mm in skirting, risers of steps and dedo on

10 mm. thick cement plaster 1:3 (1 cement : 3 coarse sand) & jointed with

white cement slurry.

9 Providing laying and jointing in true line and level 15mm dia. U.P.V.C. 30.00 Rmt. 72.65

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

10 Providing laying and jointing in true line and level 25mm dia. U.P.V.C. 30.00 Rmt. 91.84

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost

of all materials.

11 Providing laying and jointing in true line and level 40mm dia. U.P.V.C. 60.00 Rmt. 148.12

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concealed as directed including necessary

fittings etc. including testing of pipe

and joints and fixing the same with adhesive solvent, including cost of all

12 Providing laying and jointing in true line and level 50mm dia. U.P.V.C. 90.00 Rmt. 195.67

Pipe ( SCH- 40) for cold water including fittings as approved by Engineer

In Charge. Pipe shall be fixed on the wall with the help of clamp at every

two metre C/C or shall be concelled as directed including necessary

fittings etc. including testing of pipe and joints and fixing the same with

adhesive solvent, including cost of all materials.

13 Providing erecting and fixing double coated (ISI) water tank of required 6000.00 Ltr. 3.95

capacity each with all necessary fittings and connection etc. complete on

14 Providing and fixing ball cock of approved. quality as directed.(A) Copper 6.00 Nos 189.84

Metal (ii) 50mm dia.

15 Providing, laying and jointing in true line and level 160 diametre U.P.V.C 60.00 Rmt. 831.22

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 160 mm diametre x 210 mm length x 196 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

16 Providing laying (to level or slopes) and jointing reinforced concrete Light 75.00 Rmt. 665.48

duty non-pressure pipes I.S. class NP2 of the following internal diameter

with collars and butt ends prepared for collar joints including testing of

joints complete.(D) 300mm

17 Providing, laying and jointing in true line and level 75 mm dia. UPVC 6.00 Rmt. 698.92

SWRType B pipe conforming to IS 13592-1992 with one end plain and

other end socketed with rubbering and fitting conforming to ISI 14735-

1999 of approved make for drainage system pipe line, pipe shall be

jointed with each other with rubber lubricant, pipe shall be fixed on wall

using of PVC clamp at every 2000 mm c/c or shall be conceled in walss as

directed including necessary fittings such as bends, shoes etc. including

testing of pipes and joints and jointed with adhesive solvent cement

including cost of all materials.

18 Providing, laying and jointing in true line and level 110 diametre U.P.V.C 6.00 Rmt. 836.73

(Type B) conforming to IS 13592-1992 with one end plain and other end

socketed with rubber ring, & fittings conforming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with

each other with rubber lubricant, pipe shall be fixed on wall using of PVC

clamp of the size 110 mm diametre x 149 mm length x 145 mm heigh at

every 2000 mm center to center or shall be concealed in walls as directed

including necessary fittings such as bends, shoes etc. including testing of

pipes and joints and jointed with adhesive solvent cement including cost

of all materials.

19 Providing and fixing in PVC SWR cowel went 75mm dia to pipes.(B) 6.00 Nos 15.66

20 Providing and fixing in PVC SWR cowel went 110mm dia to pipes.(B) 6.00 Nos 28.79

21 Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 100 mm 12.00 Nos 571.08

diameter with jali of the following nominal diameter of self cleansing

design with C.I scread down or hinged grating including the cost of

cutting and making good the walls.

22 Providing and fixing screw down bib taps of following size.(B) Brass 12.00 Nos 186.83

chromium plated screws down Bib Tap. (i) 15mm dia.

23 Providing and fixing brass screw down stop tap.(A) 15mm dia. 12.00 Nos 205.83

24 Providing and fixing pillar tap, capstan head, screw down high pressure 6.00 Nos 308.73

with screws, shanks and back nuts. (i) 15mm dia.

25 Providing and fixing wsh down water closet (European type, W.C. Pan) 6.00 Nos 1303.71

with integral P or S trap including jointing the trap with soil pipe in

Cement Mortar 1:1 (1-Cement : 1-fine sand) (Seal and cover to be

measured and paid for separately (A) vitreous China Pattern :(i) in white

26 Providing and fixing 12.5 Litres low level flushing cistern with a pair, of 6.00 Nos 2344.42

C.I. or Mild brackets, complete with fittings such as lead valve less

syphon, 15mm nom.nal size brass ball valve with polythene float, C.P

brass handle unions and couplings for connections, with inlet, outlet and

overflow pipes, 40mm dia. porcelain enamelled flush bend including

cutting holes in walls and making good the same connecting the flush

bend with cistern and closet (overflow pipe to be measured and paid for

separately)(A) Vitreous China (I) In white colour

27 Providing and fixing plastic seat and cover for wash down water closer 6.00 Nos 291.33

with C.P. brass hinges and rubber buffers. (B) Plastic seal and cover.

28 Providing and fixing Jet spray heavy duty with S.S. Braided hose 60 cm 6.00 Nos 355.52

long with wall hook and other accessories etc. completed

29 Providing and fixing wash basin with single hole for pillar tap with C.I. Or 6.00 Nos 1961.83

M.S. brackers painted white including cutting holes and making good the

same including pillar tap, Brass waste, stop cack , bottle trap and M I

fisher union fittings :(ii) Flat back wash basin 500mm x 400mm size

including all necessary fittings etc complete shade and pattern as

approved by Engineer in charge.

30 Providing and fixing 600mm x 450mm bevelled edge mirrror of superior 6.00 Nos 833.73

glass mounted on 6mm thick A.C. sheet or plywood sheet and fixing to

wooden pluge with C.P. brass screws and washers.

31 Providing and laying (two level or slopes) and jointing with stiff mixture of 40.00 Rmt. 518.84

Cement Mortar in proportion 1:1, Salt glazed stone ware pipes of pipes

150mm laying lime concrete 1:5:10 (1-Lime putty :5-Fine samd : 10-

Graded Stone aggregates 40mm nominal size) bedding for stoneware

pipes of following internal diameters with necessary formwork and curing

complete.(B) 150mm dia

32 Providing and fixing S.W. gully trap with C.I. grating brick masonry 5.00 Nos 1246.92

chamber and water tight C.I. cover with frame of 300mm x 300mm size

(inside) with standard weight (i) Square mouth traps (B) 150mm x 100mm

size P or R type

33 Constructing brick masonry chamber for underground C.I. Inspection 5.00 Nos 3208.77

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 precast RCC cover 455mm x 610mm intenal

dimensions with frame (R.C.C. top slabe with 1:2:4 mix (1-cement :2-

coarse sand :4-graded stone aggregate 20mm size) foundation concrete

1:5:10 inside plaster 15mm thick with cement mortar 1:3 finished smooth

with a floating coat of neat cement on walls and bed concrete etc.

complete (i) Inside dimensions 455mmx 610mm and 450mm deep for

single pipe line.

34 Constructing brick masonry chamber for underground C.I. Inspection 5.00 Nos 3916.78

chamber and bends with briocks having croshing strength not less than

35Kg. Cm2 in C.M. 1:5 C.I. cover with frame (Light duty) 455mm x 610mm

intenal dimensions total weight of cover with frame to be not less than

38Kg. (Wt. of cover 23 Kg.) and Wt. of frame 15Kg. ) (R.C.C. top slabe with

1:2:4 mix (1-cement :2- coarse sand :4-graded stone aggregate 20mm

size) foundation concrete 1:5:10 inside plaster 15mm thick with cement

mortar 1:3 finished smooth with a floating coat of neat cement on walls

and bed concrete etc. complete.(i) Inside dimensions 500mmx 700mm

and 450mm deep for single pipe line.

35 Extra over items for every additional depth of 0.1M. of part thereof 5.00 Nos 242.39

beyond 450mm depth for Brick masonry chamber.(i) for 455mm x

36 Extra over items for every additional depth of 0.1M. of part thereof 5.00 Nos 264.86

beyond 450mm depth for Brick masonry chamber.(i) for 500mm x

37 Removing and scraping of old deteriorated plaster of any thickness 251.00 Sqmt 19.57

fromm wall / R.C.C member including stacking of serviceable material and

disposal of unserviceable from site of work with all lead and lift

38 Providing 15mm thick cement plaster in single coat on Rough (Similar) 44.00 Sqmt 153.20

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Ground floor

39 Providing 15mm thick cement plaster in single coat on Rough (Similar) 22.00 Sqmt 176.59

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For First Floor

40 Providing 15mm thick cement plaster in single coat on Rough (Similar) 22.00 Sqmt 199.98

side of single or half birck walls / concrete wall for interior plastering and

finished even and smooth in C M 1:4 (1 cement : 4 coarse sand) finish

etc. comp. For Second Floor

41 Providing 10 mm. Thick cement plaster in single coat for plastering on 17.00 Sqmt 140.95

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Ground Floor

42 Providing 10 mm. Thick cement plaster in single coat for plastering on 17.00 Sqmt 164.34

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For First Floor

43 Providing 10 mm. Thick cement plaster in single coat for plastering on 22.00 Sqmt 187.73

ceiling and soffits of stairs and finished even and smooth in : (I) Cement

mortar 1:4 (1 cement : 4 sand) etc. complete comp. For Second Floor

44 20mm thick sand faced cement plaster on walls upto height 10 metres 107.00 Sqmt 300.66

above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-

sand) etc. complete.

45 Removing dry or oil bound distemper by a washing and scraping and sand 2076.00 Sqmt 11.30

papering the wall surface smooth including necessary repairs to scratches

46 Removing dry or oil bound distemper by a washing and scraping and sand 551.80 Sqmt 12.90

papering the ceiling surface smooth including necessary repairs to

scratches complete.

47 Applying two coats of putty & two coats of primer of approved brand and 2627.80 Sqmt 40.59

manufacture on new wall surface to give an even shade including

thoroughly brushing the surface free from mortar dropping and other

foreign matter and sand papered smooth.

48 Wall painting (two coats) with plastic emulsion paint of approved brand 2076.00 Sqmt 80.35

and manufacture on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

49 Wall painting (two coats) with plastic emulsion paint of approved brand 551.80 Sqmt 85.76

and manufacture on undecorated ceiling surface to give an even shade

including throughly brushing the surface free from mortar droppings and

other foreign matter and sand papered smooth.

50 Finishing wall with weather proof exterior emulsion paint on wall surface 1060.70 Sqmt 114.53

(two coats) to give an required shape even shade after thoroughly

brushing the surface to remove all dirt, and remains of loose powdered

materials.etc complete

51 Painting Two coats (excluding priming coat) on previously painted steel 130.00 Sqmt 94.82

and other metal surface with enamel paint, brushing to give an even

shade including cleaning the surface of all dirt, dust and other foreign

52 Painting Two coats (excluding priming coat) on previously painted wood 130.00 Sqmt 93.54

and wood based surface with enamel paint, to give an even shade

including cleaning the of all dirt, dust and other foreign matter.

53 Removing, Repairing and Refixing Old existing wooden door shutter 45.00 No 1808.91

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with new SS 304 grade fixtures like

Hinges, 1 Stoppers, 1 Aldrop , 2 Handle & 1 lock etc. and as directed by

engineer in charge etc comp.

54 Removing, Repairing and Refixing Old existing Main wooden door shutter 18.00 No 4944.96

including fixing New Europa Main Door Lock and repairing the

shutter/frame using Randha machine and replacing old fixture and

fastening with new SS 304 grade fixtures like 3 Hinges, 1 Stoppers,

Aldrop , 2 Handle & 1 lock etc. and as directed by engineer in charge etc

55 Removing, Repairing and Refixing Old existing wooden window shutter 54.00 No 1380.67

including repairing the shutter/frame using Randha machine and

replacing old fixture and fastening with New Glass and SS 304 grade

fixtures like 3 Hinges, 2 Stoppers , 2 Handle etc. and as directed by

engineer in charge etc comp.

56 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in flooring 121.60 Sqmt 1073.13

treads of steps and landing laid on a bed of 12mm thick cement mortar

1:3 (1-cement : 3-coarse sand ) finishing with flush pointing in white

57 Providing and laying Vitrified tiles 8 to 10 mm thick , 24'' x 24'' in skrting 18.80 Sqmt 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1- cement : 3-

coarse sand) and jointed with white cement slurry

58 Applying general insecticide pest control treatment to floor,cupboards 506.40 Sqmt 89.28

etc including labour materials etc.complete.using lmidacloprid 30.5 Scas

per IS 6313 part -III ( 0.075% concentration by mass ) is recommended

10.5ml chemical diluted with 5 liter of water application 0.5 liter chemical

/ Sqm of surface is recommended as per I.S.

59 Providing and fixing 35 mm thick shutters for Doors, windows and clear 13.00 Sqmt 3592.72

story windows including anodised alluminium butt hinges with necessary

screws. (A) Indian Teak Wood(iii) Partly panelled and partly glazed.

60 Providing and fixing 35 mm thick flush door Single shutter, solid core 24.00 Sqmt 3157.26

with Shutter of Factory made & Stamped I.S 12823 Grade one ,Type one

,melamine faced three layred resin Flushed Door Having Decorative

Lamination on both sides & 12 mm T.W.Beading Around the Door,FROM

HOLDING LICENCE FOR MINIMUM 5 YEARS .and stainless steel handle

and necessary Locking system of Godrej, zinc coated hinges ,fixtures &

fastenings etc directed by engineer in charge.D2

61 Providing and fixing FRP frame size 100 x 50 mm and 35 mm thick FRP 32.00 Sqmt 2547.22

depress panel Single shutter having extra reinforcement on sides & edges

in Gel coat finish.The core of the shutter & frame is to be filed up with

injected fire retradat grade polyurethene foam done in situ along with

embeded wooden pieces for stiffening & also taking hinges &

fintures.The whole FRP frame & shutter is to be waterproof,

weatherproof ,termite proof & resistance to mild acid/alkali.Rates are to

be inclusive of S.S hinges with necessary screws & alluminum fixtures &

fastenings & fartener sleeve.Colour and Shade approved by Engineer-In-

62 Providing and fixing Mirror polished 18 mm thick Granite stone in Single 104.00 Sqmt 2966.37

piece with full round edge and polished of approved quality in clading on

Cill & Jambs and around the doors/ windows/ ventilation with 12 mm

thick cement motor CM (1:4) and fixing with cement slurry & adhesive

including moulding of exposed edges as directed by engineering in charge

63 Providinfg and fixing Safty grills of required pattern for windows/ Door 256.00 Kg 109.08

using necessary M.S angle/ M.S pipe, M.S flats and other structural steel

at required spacing including cutting, welding and fabriction etc.

including one coat of primer of approved quality and two coats of oil

painting as per detail drawing etc complete.

64 Providing and Fixing Pre Stitched Fiber Glass Mosquite Net with Fastener 61.00 Sqmt 360.57

tap in four side for all window and other opening with required all

accessories etc. complete.

65 Providing average 20 mm thick single coat polymer plaster by removing 162.00 Sqmt 455.51

detoriated plaster over RCC member, like column, beam, slab etc.

exposing existing reinforcement including scraping by wire brush,

applying rust removing chemical, rust convertor and zinc rich primer on

existing reinforcement, applying polymer bonding agent on existing

concrete surface including plastering in CM 1: 3 in single coat including

standard quality (Dr, fixit or any equivalent brand) curing compound

agent and finishing with floating coat of neat cement slurry adding

Polyalk Fix Prime polymer chemical as per directed by Engineer - in -

charge for all floors.

In Words Twenty one Lakh Nine Thousand Eleven Rupees and Twelve Paisa Only.

I/We am /are willing to carry out the work at…………% above/below percent (should be written in figures and words) at the

estimated rates mentioned above amount of my/your tender works out as under.

*Estimated Amount *Estimated Amount

put to Tender Rs. 2109011.12 put to Tender Rs.

Deduction …………….. % below………………… Add ………… % above Rs. …………….

1 The Credit Value of Dismentalled Materials of Amount Rs.12561.00 (Twelve Thousand Five Hundred Sixty One Only) shall be

recovered from the 1st Running Bill of the Contractor.

2 The Contractor shall be exhibit board as per government circular No.BDG/3277/1657 N dated 26/01/1997 S (M.GUJ) with

detailed specification and details of work and amount Involved at site without any payment as directed by Engineer-In-

3 All work shall be carried out as per public work department hand book and other specifications of Division or as directed.

4 All columns in the Schedule should be filled in ink & the total of the entries in the last column should be struck by Contractor

under his sign.

5 Rates quoted include clearance of site (Prior commencement of work and its close) in all respects and hold good for work

under all condition, site, moisture/ weather etc.

6 The Boards stating the detailed specification & detailes of Work shal be provided by the contractor as per Government

Resolution T.No.1890-240- Dtd.18/11/1990 and directed by contractor at his own cost immediately on recommanding the

7 Testing of Material Shall be done as per the statement attached with specification,The material IS Tested in GERI by

Executive Engineer Surat and Bill for the testing charges shall be paid by Executive Engineer,1% of the Amount put to

8 1% of the Construction Cost Shall be deducted from the bill Amount of the contract as per the Buildig and other

Construction works walfare cess at 1996(Labour and Employment Department Letter No CWA-2004-1831-M(3)Dated

9/12/2005 notification Of Labour & Employment department dt.03/01/2005 & Labou & Employment Department Letter no

9 In Case of RCC items Where there is a change in Grade of Mix or Change as per Actual Mix design the cost of difference of

Cement Difference shall be deducted from the rate of original item at the rate of star rate mentioned in the tender.

10 Contractor are advised to visit site before loading tender rate.

11 Necessary wiring point and drainage point are installed at Site however any modification in electrical installation and

drainage & water supply connection and minor correction to perform experienced in Lab shall be done by contractor at his

12 The Rates are inclusive of all the taxes (Excluding GST),Transport Charges,Octroi duty and storage Charges up to date.

13 The materials Covered for wiring should be got approved from the Engineer Incharge of the work.

14 GST and Income tax TDS will be deducted at a source while making payments of bills.

15 GST will be paid extra as per Govt. amendment.

16 The Materials on the work shall have to be used and carried out as specified in technical note.

I/We hereby Declare that I/we have Visited the site and fully Exquisite myself/ourselves with the local situation regarding

(A) materials,Labour and other factors pertaininfg to work before submitting tender.

I/We hereby Declare that I/we have carefully Studied the condition of Contracts,Detailed Specification and other tender

Document of this work and agree to execute the same accordingly.

Deputy Executive Engineer

Valsad (R&B) Sub-Division

Signature of Bidder

Executive Engineer

Valsad (R&B) Division