Providing and Fixing Kota stone flooring, PPGL shed at lalbaug Meter Testing Lab and construction of TC Plinth Otta, TC Stacking Platform at Lalbaug Division Campus under Baroda City Circle.

Name of work :- Providing and Fixing Kota stone flooring, PPGL shed at lalbaug Meter Testing Lab and

construction of TC Plinth Otta, TC Stacking Platform at Lalbaug Division Campus under Baroda City Circle.

PARTCULARS OF ITEM QTY PER RATE AMOUNT

Providing and laying polished Kota stone slab flooring over 20mm

(Average) thick base of cement mortar 1:6 (1-cement : 6-coarse

sand) or L.M. 1.1.5 (1-Lime putty :1.5 - coarse sand) laid over and

jointed with grey cement slurry mixed with pigment to match the

Excavation forincluding rubbing

foundation uptoand

m depthetc. complete.

including (A) out

and stacking of useful materials and disposing off the excavated

stuff upto 50 Meter lead.(A) Loose or soft soil

Taking out existing CC interlocking paver blocks from footpath/

central verge, including removal of rubbish etc., disposal of

unserviceable material to the dumping ground, for which payment

shall be made separately and stacking of serviceable material within

Laying oldlead as per

cement direction

cocrete of Engineer-in-Charge.

interlocking paver blocks of any design/

shape laid in required line, level, curvature, colour and pattern

over and including 50 mm thick compacted bed of coarse sand,

filling the joints with fine sand etc. all complete as per the

Providing Engineer-in-charge.

and (Old CC1:4:8

laying cement concrete paver(1-

blocks shall: be

Cement 4- coarse

sand : 8- hand broken stone aggregates 40 mm nominal size) and

curing complete excluding cost of formwork in (A) Foundation and

Brick work using common burnt clay building bricks having crushing

strength not less than 35 kg./Sq.Cm. in foundation and plinth in

Cement Mortar 1:6 (1- Cement : 6 -fine sand)(B) Conventional

Do as above - but for Brick work in superstructure above plinth level

7 up to floor two level including parapet/ stair cabin. 12.90 CMT 4359.8

Half brick masonry in common brunt clay building bricks having

crushing strength not less than 35 Kg/Sq.Cm. in Cement mortar 1:4

(1-Cement : 4 -coarse sand ) in superstructure above plinth level

upto floor two level. (A) Modular

Filling in foundation and plinth with murrum or selected soil in

layers of 20cm. thickness including watering, ramming and

consolidating etc. complete.

Providing 15mm thick cement plaster in single coat on Rough

(Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar

1:3 (1-cement:3-sand) & finishing with a floating coat of neat

cement slurry. cement concrete M 200 and curing complete

including the cost of form work and excluding reinforcement for

reinforced complete work in(C)- Beam up to floor two level.

PARTCULARS OF ITEM QTY PER RATE AMOUNT

Providing TMT Bar FE 500D reinforcement for R.C.C. work including

bending, binding and placing in position complete upto floor two

Structural steel work ( Confirming to IS 4923-1997) riveted, bolted

or welded in builtup for all type sections, in framed work, including

cutting, hoisting, fixing in position and applying a priming coat of

approved steel primer all complete as per the structural designs

Providing of Engineer

& Fixing 0.60 mminthick

corrugated pre painted galvalume

sheet of Tata / Jindal / Monakshi / National / Essar or Equivalent ISI

marked make for roofing including laying in proper alignment fixing

with nut bolt ,gusset ,tapping screw washer, silicon etc., complete

Providing by fixing

EIC. The ratethick

3 mm is inclusive of allofmaterials,

FRP Sheet approved labours,

color with Machine screw fitting etc completed as per directed by

Providing cement vata (10 cm x 10 cm size ) quartar round in

cement mortar 1:1 including neat cement finishing watering etc.

Applying two coats of putty & two coats of primer of approved

brand and manufacture on new wall surface to give an even shade

including thoroughly brushing the surface free from mortar dropping

and other foreign matter and sand papered smooth.

Finishing wall with weather proof exterior emulsion paint on wall

surface (two coats) to give an required shape even shade after

thoroughly brushing the surface to remove all dirt, and remains of

loose powdered materials.etc complete

Providing and fixing FRP frame size 125x65 mm and 35mm thick FRP

shutter having extra reinforcement on sides & edges in polish finish.

The core of the shutter & frame is to be filed up with injected

polyurethene foam done in situ alongwith embedded wooden pieces

Providing and& also

fixingtaking hinges

window & fintures.

having The whole

extruded FRP frame

aluminum Colour

anodized section horizontal Three track member size 61.85 mm x

31.75 mm x 1.20mm @ wt.of 0.695 Kg/mt, vertical member of size

61.85 mm x 31.75mm x 1.30 mm @ wt.of 0.659 Kg/mt with sliding

outhorizontal member sizeto40mm

plinth treatment post x construction

structure by spraying chemical solution for termite control

treatment including labour and material consistment with I.S.I

specification. Using Chlordene and Chiorpurfiles 20 EC. As Per

6131_paret-II Consentration

Carrying out wall treatmentWeight one percent

for termite controlis including

recommended i.e

with chemical solution in oil base including labour and material

Using Chlorpyriphos 20 ECAs per IS 6313 part - II (1% concentration

by mass) is recommended i.e one litre chemical emulsion diluted

Providing andoil fixing

base. Total solution

to wall willand

ceiling be 20floor

inclusive of one

working pressure poluthene pipes of the following outside Dia. Low

densidy, complete with special falnge compression type fittings,

wall clipsetc. including making good the wall ceiling and

Providing andmm

fixing to wall ceiling and floor 10.0Kg. F/Cm2 working

pressure polythene pipes of the following outside Dia. Low densidy,

complete with special falnge compression type fittings, wall

clipsetc. including making good the wall ceiling and floor.(F) 75mm

Providing and fixing in position cowel went to pipes.(C) 100mm dia

PARTCULARS OF ITEM QTY PER RATE AMOUNT

Providing laying and jointing in true line and level 15mm dia.

U.P.V.C. Pipe ( SCH- 40) for cold water including fittings as

approved by Engineer In Charge. Pipe shall be fixed on the wall with

the help of clamp at every two metre C/C or shall be concealed as

as above for 25 necessary

mm nominalfittings etc. including testing of pipe

dia Pipes 20.00 RMT 90.93

Providing and fixing PVC SWR Nahni trap IS 14735 for drain - 75 mm

diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including

the cost of cutting and making good the walls.

Repairing of the chambers by about one layers with toothing , bk

masonary, plaster, & removing dismentalled stuff, etc & making the

entire chamber in working conditions etc completed curing,

finishing with plaster etc .

Providing and laying water proofing treatment in sunken portion of

WCs, bathroom etc., by applying cement slurry mixed with water

proofing cement compound consisting of applying: (a) First layer of

slurry of cement @ 0.488 kg/sqm mixed with water proofing cement

Providing @ 0.253 kg/

laying sqm. This

tiles 6mm will be allowed

thick to air curenon

white /coloured

skid tiles in flooring, treads of steps and landing laid on a bed of

12mm thick cement mortar 1:3 (1-cement : 3-coarse sand ) finishing

with flush pointing in white cement.

Providing and layingCeramic tiles 6mm thick in skrting risers of

steps and dedo on 10mm thick cement plaster 1:3 (1-cement : 3-

coarse sand) and jointed with white cement slurry.

Providing and fixing 15mm L&K make angle cock as directed by EIC.

P&F Stainless Steel 304 grade Soap Dish with all tools and tekels etc

P&F Stainless Steel 304 grade Towel Holder with all tools and tekels

36 Providing and fixing L&K make Pillar cock as directed by EIC 1.00 No 969

Providing and fixing L&K make Conceal stop cock including two nos

of brass MFT as directed by EIC.

Providing and fixing L&K make flush cock medium including two nos

of brass MFT as directed by EIC.

Providing and fixing Pilot brand make or equivalent brass health

faucet directed by EIC.

Providing and fixing Jet spray heavy duty with S.S. Braided hose

Providing & Fixing 450 X 600 X 6 mm. thick size approved best

41 quality of looking glass mirror with plastic molded frame, complete 1.00 No 578.76

as directed by E. I.C.

Providing and fixing standard quality CERA or equivalent Europian

WC Commode EWC including P trap bends and having plastic seat

cover fixed with commode and connection for flush cock with Flush

Cock, with Jet spary and concealed stop cock etc., complete as

Providingincuding necessary

and laying PVC pipenon

black finished connection upto outside

woven polyster 3 mmofthick

APP (Atactic Polypropylene Polymerr) sheets manufactured by

Bituminate Co. Ltd. Or pidilite or equi make for water proofing on

various roof including applying a coat of primer after preparing

surface forsilver

Providing laying APP membrane

waterproofing welding etc

oil painting complete

on APP sheet including

45 Providing Manpower for various activities as directed by EIC 15.00 No 487

PARTCULARS OF ITEM QTY PER RATE AMOUNT

Tractor Trip for Removing of debris away from site with all lead and

Misc. work/Unforseen work if required to be carried out during

execution of the work which are assential and required at stge of

working such as elevation work, floring work, electrical work,

Furniture work, landscaping work, plumbing work, false ceiling

work, colour work and misc.civil work as per instruction of engineer TOTAL

The rates are exclusive of GST Tax. GST Tax shall be reimbursed on submission of all documents, incl. submission of certified

copy of challan as per latest prevailing laws of executed amount.

TDS for Income tax and work Contract Tax shall be deducted as per Govt. latest prevailing law.

Security Deposit shall be released on successful completion of one year from actual date of completion

finalization of final bill whichever is later. For special items like waterproofing, anti-termite treatment, separate amount shall

be deposited as per item.

I/We have read and clearly understood the terms, conditions, Schedule 'B' and Technical specifications.

I/We hereby accept all the conditions and specifications of MGVCL / PWD as well as specification of this tender document, and

I/We am/are willing to carry out the work at_________% (In words_____________________percentage) above/below the

estimated cost. Accordingly the total amount of my/our tender works out to Rs. (In words Rs.

estimated cost. Accordingly the total amount of my/our tender works out to Rs. (In words Rs.

Stamp & Signature of Contractor Baroda City Circle.