General

Earthwork excavation in Ordinary soil by Manual Means upto 3 m depth for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitable material as per Technical Specification 305 MORD / 304 MORTH (RBR-FNDN-1(A)) - 1 Cum - For Key walls

Providing concrete for plain/reinforced concrete (M10) in open foundations using 40 mm hard stone aggregate , mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH.

Providing concrete for plain/reinforced concrete (M10) in open foundations using 20 mm Graded hard stone aggregate, mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days complete as per drawings and technical specifications Clause 802, 803, 1202 & 1203 MORD and 1500, 1700 & 2100 MORTH - For Key walls

Filling of Stone Crusher Dust for foundation trenches including cost and conveyance off all materials and all labour charges ramming, watering etc., as per drawing and technical specification in Clause 305.3.9 MORD & 304 MORTH

Laying of Plain cement concrete pavement, thickness as per design, over a prepared sub base, with 43/53 grade at cement as per Clause 1501.2.2 (M30 Grade) at 400 kg per cum, coarse and fine aggregates conforming to IS: 383, maximum in a concrete mixer of not less than 0.28 cum capacity and appropriate weigh batcher using approved mix design, laid in approved fixed side formwork (steel channel, laying and fixing of 125 micron thick polythene film, wedges, steel plates including levelling the formwork as per drawing), spreading the concrete with shovels, rakes, compacted using needle and plate vibrators and finished in continuous operation including provision of contraction and expansion, construction joints, near approaches to bridge/culvert and construction joints, and curing of concrete slabs for 14-days and water finishing to lines and grade as per drawing and Technical Specification Clause 1501 MORD - For Full Road

Wiring with 2 runs of 14/0.3mm (1.00 Sq.mm) PVC insulated F.R flexible copper cable (ISI Mark) make of Havells/KEI/Polycab/Bonton/Gold Medal/V-Guard/GM Million/HPL/Finecab/Orbit in the existing pipe with 6-A/10-A 1 way 1 module switch make of Legrand Arteor/Schneider Zencelo/Honeywell/Blenge plus, Ceiling rose of make Anchore/Gold Medal Olive/Million Zoom and 8 modular horizontal/vertical cover frame make of Legrand Myrius/Cabtree Thames platinum/GM Four Five/Mullion Logus/Gold Medal Curve/CPL/Panasonic vision/Salzer S.90,Series covering to module box including all labour charges etc., complete for LIGHT POINTS, FAN POINTS & BELL POINTS in Residential Building

Supply and fixing of 20W, 2400 lumens, T8 not less than 1100 mm length LED retrofit tube light with aluminum anodized body, input voltage AC 220-260 Volts, having luminous efficacy >120 lumens/watt, with PF>0.9, surge protection: 2KV, THD<10%, with inbuilt driver and frosted cover CCT: 3000K-5700K, minimum CRI>70, etc., as per IS 10322 (Part 5/ Sec 1), 2012, complete with earth connection and not less than two years warranty. Makes: As per list of recommended brands as category I (ELEC-3.8.16,MAT-03351 SoR 2023-24)