Annual Rate contract for Fabrication of various items preparation from M.S. Angle, Channel, Round Bar & M.S. Flat etc., as per companys drawing & specification under Bharuch Rural Division office.

FOR THE YEAR 2024-25

Schedule-B of Rate contract for Fabrication of various items preparation from M.S. Angle,

Channel, Round Bar & M.S. Flat etc., as per company's drawing & specification under Bharuch

Rural Division office.

Sr. No. Item Code Name of Item Unit

Fabrication of Anchor Rod from 16 SQ.mm MS Round bar

1 9910000049 & 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of Anchor Rod from 16 SQ.mm MS Round bar

2 9910000050 & 50 mm x 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of Eye Bolt from 16 SQ.mm MS Round bar with

3 9910000015 supplying of 2 (two) nuts of suitable size as per approved No.

drawing and requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS Round bar

4 9910000028 & 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of Turn Buckle from 16 SQ.mm MS Round bar

5 9910000016 & 50 mm x 50 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 11' (feet) long Top/Bottom/D.O. angle

6 9910000030 from 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom/D.O. angle from

7 9910000031 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 4'.6" (feet) long Tapping / bracing angle

8 9910000003 from 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 2'.3" (feet) long bracing/ support angle

10 9910000039 from 65 mm x 65 mm x 6 mm M.S. angle as per approved No.

drawing and requirement of the company.

Fabrication of 11KV HT 'V' Cross Arm from 65 mm x

12 9910000021 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

File No: DGVCLDBHR/TEN/e-file/4444/2026/1569/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0427/05/2026 Approved Date: 22-05-2026

Fabrication of 11KV HT Top fitting from 65 mm x 65 mm

13 9910000022 x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per No.

approved drawing and requirement of the company.

Fabrication of 22KV HT Top fitting from 65 mm x 65 mm

15 9910000055 x 6 mm M.S. angle and 50mm x 6 mm M.S. flat as per No.

approved drawing and requirement of the company.

Fabrication of 22KV HT 'V' Cross Arm from 65 mm x

14 9910000037 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of Guy Clamp pair suitable for PSC pole from

16 9910000041 50mm x 6 mm M.S. flat as per approved drawing and PAIR

requirement of the company.

Fabrication of 'U' Clamp from 50mm x 6 mm M.S. flat as

per approved drawing and requirement of the company.

Fabrication of 'C' clamp suitable for PSC pole from 50mm

18 9910000043 x 6 mm M.S. flat as per approved drawing and requirement No.

of the company.

Fabrication of ‘C’ clamp suitable for RSJ GIRDER pole from

19 9910000044 50mm x 6 mm M.S. flat as per approved drawing and No.

requirement of the company.

Fabrication of Three Hole Patti from 50mm x 6 mm M.S.

20 9910000056 flat as per approved drawing and requirement of the No.

Fabrication of 11' (feet) long Top/Bottom channel from

21 9910000061 100 mm x 50 mm x 5 mm M.S. channel as per approved No.

drawing and requirement of the company.

Fabrication of 9' (feet) long Top/Bottom channel from

22 9910000060 100 mm x 50 mm x 5 mm M.S. channel as per approved No.

drawing and requirement of the company.

Fabrication of 11'(feet) long angle bracing from 50 mm x

23 9910000035 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 9'(feet) long angle bracing from 50 mm x

24 9910000034 50 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of 11' (feet) long channel welded from

25 9910000062 assorted length of scrap channel as per approved and No.

requirement of the company

Fabrication of 9' (feet) long channel welded from

26 9910000063 assorted length of scrap channel as per approved and No.

requirement of the company

Fabrication of Guy Clamp pair suitable for 10 mtr PSC pole

27 9910000072 from 50mm x 6 mm M.S. flat as per approved drawing PAIR

and requirement of the company.

Fabrication of Guy Clamp pair suitable for 9/11 mtr RSJ

28 9910000073 GIRDER pole from 50mm x 6 mm M.S. flat as per PAIR

approved drawing and requirement of the company.

Fabrication of 5' (feet) long Tapping angle from 65 mm x

29 9910000066 mm x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of H.T. Ext'n suitable for 22KV system from

30 9910000067 x 65 x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

Fabrication of H.T. Ext'n suitable for 11KV system from

31 9910000068 x 65 x 6 mm M.S. angle as per approved drawing and No.

requirement of the company.

File No: DGVCLDBHR/TEN/e-file/4444/2026/1569/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR

Letter No: DGVCLDBHR/0427/05/2026 Approved Date: 22-05-2026

Fabrication 750 mm long channel for HT AB Conductor

32 9910000069 100mmx50mmx5mmMS channel as per approved drawing No.

and requirement of the Company.

Fabrication of 22 KV "V" Cross Arm from

33 9910000070 100mmx50mmx5mm MS channel as per approved drawing No.

and requirement of the Company.

Total value of Tender Rs.25,00,000/-

(In Words: Twenty Five Lakhs Only)

1. All fabricated items shall be fabricated as per DGVCL approved drawing and by

NOTE:- welding rods confirming to the relevant ISI specification and as directed by Engineer

2. Necessary electricity connection for fabrication items shall be provided by DGVCL

on payment of required charge for connection & electricity bill of the same shall be

paid by the agency.

3. All the rates are inclusive of PF & Exclusive of GST applicable time to time.

4. All fabricated items shall be painted with good quality (ISI Marked) of red oxide

5. Fabricator/Contractor have to lift the raw material from the nearest store at his own

6. Fabricator/Contractor have to credit finished goods to the store or as per instruction

of Engineer In-charge at his own cost.

Deputy Engineer (Tech-2)

DGVCL, Bharuch Rural Division

Executive Engineer

DGVCL, Bharuch Rural Division

File No: DGVCLDBHR/TEN/e-file/4444/2026/1569/Technical

Approved By: Executive Engineer,Technical,DGVCLDBHR