Loading…
Loading…
Tender Value
₹6.3 L
EMD Value
₹6,303
Closing Date
4 Aug 2026, 3:30 pmClosed
GUNTUR MUNICIPAL CORPORATION
GUNTUR
Providing Borewell and Submersible Motor for the Mechanized Garbage Transfer Station in the Gorantla Area under Guntur Municipal Corporation Section.
968916
ET NO.25/2026-27 ITEM NO-16
OPEN - NCB
Civil Works
GUNTUR, ANDHRA PRADESH
1 document required · 1 mandatory
₹224
₹6,303
27 Jul 2026
27 Jul 2026
27 Jul 2026
Drilling of Bore well with Hand Bore set to a finished dia of 112/165/175/180 mm justify both sides in all kinds of formations suitable for hand bore set drilling such as black cotton soils, sandy and alluvial soils and insertion of PVC/PVC blue casing pipe with couplings including slotting of pipe where ever required and fixing of bore well with cap and bail plug as per directions of the department for a finished item of work including conducting yield test, crew charges, cost of consumables, transportation charges and bore development charges and all other charges required in fixation of pipe assembly, Flushing of bore with required pressure excluding cost of all required materials such as cap, bail plug, clamp sets, bolts and nuts etc., excluding all taxes , cost of PVC casing pipe, slotting charges.
Slotting charges for 175 mm dia PVC blue casing pipe per RM
Cost and supply of 175 mm dia PVC blue casing pipe per RMt
Point Selction Charges for Bore Well to Geologist Report etc.,
Supply and Transportation of 5 HP, 5star rated submersible motor pumpset, confirming to IS 8034 and motor confirming to IS 9283 with water proof winding, Pump shall be suitable for various delivery head and discharge with stainless steel shaft. Motor suitable for working on 415V ± 10% , Three Phase 50 Hz AC supply, etc complete for 6" Bore well. Makes : As per list of recommended brands as category I. (5HP, 12-16 stage)
Manufacture, Supply, & Delivery of HDPE Pipes conforming to IS 4984 - 2016 including transportation to anywhere in A.P, excluding all taxes (Supply up to 90 mm dia. in coil & above 90 mm dia. straight length.) 8.0 kg/ sqcm : 63 mm dia pipe for motors
Fabrication, transportation and and supply of wall mounted control panel board of size 600x600x250mm made of 18 SWG CRCA sheet steel enclosure, 14 SWG mounting plate for cable entry fabricated, painted with two coats of Red oxide primer and two coats of Grey paint, lock and key arrangements two side louvres with weld mesh inside etc., complete consisting of the following equipment with all internal wiring using L&T / Finolex copper FRLS cables of suitable size and capacity and cable clamp etc complete for 3 phase motor pump sets. Makes: As per list of recommended brands. : Upto 5.00HP with DOL Starter of.
Supply of 3 Core 2.5 Sq mm ISI marked Flat Copper cable of ISI for Submersible Motors confirming to IS: 694:1990. Makes: As per list of recommended brands as category I : 2.5 Sq mm
supply and delivery of Bore Caps including cost and conveyence of all materials and all labour charges etc.complete
Provision for Seignorage charges
Provision Towards merit 2%
Provision Towards DMF 30%
Provision for NAC @ 0.10%
Provision for GST @ 18%
Provision for TPQA @ 0.739 %
Unforeseen item
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
RAW_HTML
Tender Document.doc
TENDER_DOCUMENT • 0.20 MB
boq.xlsx
TENDER_DOCUMENT • 0.01 MB
DECLARATION.docx
TENDER_DOCUMENT • 0.02 MB
Notice Inviting Tender item 2.docx
TENDER_DOCUMENT • 0.04 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .