PERIODICAL SERVICES INCLUDING PAINTING OF HANGERS FOR TECH AREA CRTAIN BLDGS COMPOUND WALL AND REPAIRS TO TECH AREA HANGER DOORS HANGER ROLLING SHUTTERS ETC AT NAY NAQAS MOK CNAMS AREA AT NAVAL BASE KOCHI UNDER GE NW KOCHI

Amount

M&L for Preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of white wash at any height of bldgs/store houses/hangars compleate all as specified and directed by Engr-in-charge.

All as per Item No. 1 above but on ceiling compleate all as specified and directed by Engr-in-charge.

M&L for Preparation of old decorated surface of walls including cornices (Plastered or unplastered) and applying one coat of colour wash at any height of bldgs/hangars all as specified and directed by Ein C.

M&L for Preparation of old treated surface of wall and applying one coat of oil emulsion distemper all as specified and directed by Ein C.

M&L for preparation of old painted surface of wood or wooden based surface of any description over 10cm width or girth and applying one finishing coat of synthetic enamel paint all as specified and directed by Ein C.

M&L for preparation of old painted surface of wood or wooden based surface of any description n.exc 10cm width or girth and applying one finishing coat of synthetic enamel paint all as specified and directed by Ein C.

M&L for Preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified and directed by Ein C.

M&L for Preparation of old painted steel surface of any description n.exc 10cm width or girth and applying one coat of synthetic enamel all as specified and directed by Ein C.

M&L for preparation of old treated wooden surface exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and as directed by Engineer In Charge .

M&L for preparation of old treated wooden surface n.exc 10 width or girth and applying one under coat and one finishing coat of synthetic varnish all as specified and as directed by Engineer In Charge .

M&L for Preparation of old painted steel surface of any description and applying one coat of synthetic enamel on trussess, purlins, rafters etc and connected items of hanger/store houses at any height, complete all as specified and as directed by Engineer In Charge.

M&L for preparing old steel surfaces and applying two coats of anti corrosive paint on trussess, purlins, rafters,columns,sliding doors etc and connected items of hanger/store houses at any height, complete all as specified and as directed by Engineer In Charge .

M&L Applying one coat of cement base paint on old plastred surface including preparation of new surface at any height of bldgs/hangars/store houses all as specified and directed by Ein C.

M&L applying two coats of antifungal paint over a coat of primer including complete removal of exisitng treatment at any storeyof bldgs/hangars, including provn and removal after use, of necessary scaffolding, complete all as specified and as directed by Engineer In Charge.

Taking down cement plaster on brick or stone wall etc incl racking out, joints, backing for key, scrubbing down with water etc complete all as specified and as directed by Engineer In Charge.

M&L for rendering in CM 1:6, 10mm thick for on fair faces of brickwork or concrete surfaces finished even and smooth without using extra cement complete all as specified and as directed by Engineer In Charge.

M&L Applying Two coat of Oil emulsion distemper on wall including chalk whiting on plastred surface,preparatry to distempering complete all as specified and as directed by Engineer In Charge.

M&L for preparation of new surfaces and applying three coats of white wash on wall complete all as specified and as directed by Engineer In Charge.

M&L for rendering 15mm in CM 1:4 on brick or concrete surface of wall finished fair and even without using extra cement complete all as specified and as directed by Engineer In Charge.

M&L Applying two coat of cement base paint over a coat of primer on newly plastred surface including preparation of new surface at any height of bldgs/hangars/store houses complete all as specified and as directed by Engineer In Charge.

M&L for Preparation of new plastered surface of wall and applying two coat of antifungal paint over a coat of primer at any storeyof bldgs/hangars, including provn and removal after use, of necessary scaffolding, complete all as specified and as directed by Engineer In Charge.

S&F in repair for Mild steel hold fast of suitable size fixed with masonry walls for rolling shutters,embedding in concrete and screwing etc. securing bolts; as directed, drilling holes, flat iron including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe 290 Gde E-165 complete all as specified and as directed by Engineer In Charge.

M&L for PCC (1:2:4) 20mm graded Agg Type B1 in hold fast and other similar bands, copings, kneelers, apex stones, bed plates complete all as specified and as directed by Engineer In Charge.

Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as specified and as directed by Engineer In Charge.

M & L for MS rolled sections confirming to Fe 410 -W (Gde-E- 250) quality- A as in main and cross beams, hip and jack rafters,; and purlins where connected to common rafters running rails and guides for sliding door fixed with angle cleats,roller/ wheels or other connecting plates complete(height up to 12m) complete all as specified and as directed by Engineer In Charge.

All as per item No. 25 here in before but for fabrication & erection fixing only complete all as specified and as directed by Engineer In Charge.

Framed work as in doors orgates of angle or other section Fe-410-W Gde- E 250 quality A with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or othercovering. Doors, etc. to be prepared for hanging or slidingwith and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete (height up to 15m) complete all as specified and as directed by Engineer In Charge.

All as per item No. 27 here in before but for fabrication & erection fixing only

Framed work such as grills,gratings, etc.. with ends of bars shouldered and/or riveted, or forged into spikes; framed guard bars; barred iron doors;ladders; framed alusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed by Engineer In Charge.

M & L for preparation of new steel surfaces n exc 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete (height up to 15m) complete all as specified and as directed by Engineer In Charge.

S&Fin repairs for 1.25 mm thk Steel rolling shutters, with out ball bearing, as specified including top cover, anchoring rod, hasp and staple and one shop coat of primer; erected in position as indicated, complete at any height of bldgs/store houses: push pull or manual type, complete (height up to 15m) complete all as specified and as directed by Engineer In Charge.

All as per item No. 31 here in before but gear operated type with bevel gear box and crank handle(height up to 15m) complete all as specified and as directed by Engineer In Charge.

S&F in repairs for 1.00mm thk plain galvanised mild steel sheeting top cover of rolling shutter, complete(height up to 15m) complete all as specified and as directed by Engineer In Charge.

Supply and fixed in repair of safety lever locks mild steel with 4 levers for rolling shutters complete all as specified and as directed by Engineer In Charge.

Supply and fixed in repair of MS spring for rolling shutters complete (height up to 12m) complete all as specified and as directed by Engineer In Charge.

M&L for cleaning of rolling shutter and applying greesing on steel surfaces in side channels and top for smooth functioning of all steel members complete at any height of hangars/store houses all as specified and directed by Engineer in Charge.

M & L for preparation of new steel surfaces exc 10 cm width or girth and applying two coats of Synthetic enamel paint over a coat of red oxide primer complete at any height of hangars/store houses complete all as specified and as directed by Engineer In Charge.

M&L for Preparation of old painted steel surface of any description over 10cm width or girth and applying one coat of synthetic enamel paint all as specified at any height of hangars/store houses (height up to 15m) complete all as specified and as directed by Engineer In Charge.

Removal of existing wheel iron top/bottom of hanger doors including replacing of its bearing if necessary and refixing the same in the door all as directed by the Engr-in-charge at any height of hangars/store houses incl cutting/ welding, greasing, oiling, etc. complete (height up to 15m) complete all as specified and as directed by Engineer In Charge.

M& for 3 mm Epoxy Poly-Urethane coating in floor of seaking simulator with following specifications :- (a) Cleaning of surface free from dust dirt moisture and all foreign materials from the floor. All floor is to be cleaned by means of scrubber. Acid itching is done to the floor followed by alkaline wash and then it is cleaned by using the solvent/ de-greaser cleaner to remove all residues for floor cleaning all mechanized equipments are to be used like scrubbers senders hot blowers vacum cleaners moisture test machine etc. (b) Providing and applying two component low viscous epoxy primer having a volumetric ratio of mixing of resin and hardener in equal volumes to provide a DFT of around 200 microns. (c) Providing and applying EPU (Epoxy Poly-Urethane) based self levelling screed with polymer to aggregate ratio not exceeding 1:2:5 parts to the desired thickness of 2000 microns. The layer is de-aerated by spike roller to dislodge air pockets. (d) Providing and applying EPU based conductive self levelling top coat containing anti stats to yeild a thickness of 800 microns.

Dismantling plain or corrugated steel sheeting any gauge thickness incl roof/Wall covering complete all as specified and as directed by Engineer In Charge.

S&F prepainted galvalume zinc coating GI based corrugated steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer In Charge.

S&F prepainted galvalume zinc coating GI based plain steel sheet 0.50 mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall fixed with self tapping screws complete all as specified and as directed by Engineer In Charge.

M&L for 2mm thk fibre glass reinforced translucent corrugated sheeting with two corrugation side lap fixed with coach screws and washer in roof wall etc in repairs complete all as specified and as directed by Engineer In Charge.

S&F in repairs 600 mm dia aluminium body turbo vent of base size 1500 x 1500 mm fixed on top of roof as per manufacture instructions complete all as specified and as directed by Engineer In Charge.

Dismantling wall & ceiling boards (fibre, pulp, insulation etc) or insulation boards/slabs/blankets, any thickness, including cover fillets complete all as specified and as directed by Engineer In Charge.

M & L for 4mm thick Non asbestos fibre cement building boards fixed or laid/ inserted to timber/GI/Aluminium framework with screws in ceiling incl anodised Aluminium snap grid of size 605x605 mm and GI hangers 6mm dia upto 1200 mm length complete all as specified and as directed by Engineer In Charge.

M&L for preparation of new surfaces (Ceiling) applying two coat of oil bound distemper over one coat of primer complete all as specified and as directed by Engineer In Charge.

Anaswara Constructions

Albert Rebello and Company

Vackachan Constructions