Proj No 328/26 Improvements to Basic Amenities of Anganwadi No 155 in Ward 17

Work Name:Annual Plan-Kolazhy GP Proj No 321/25-26 Construction of Kuttur LP School Building in Ward 15-2025-2026-General Civil Work

tc. and removal of form for:Stairs, (excluding landings ) except spiral - staircases)‡5.9.19:Centering and shuttering including strutting, etc. and removal of form for:Weather shade, Chajjas, corbels etc., including edgesÎ5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or morekilogramÑ5.22A.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete above plinth level.Thermo - Mechanically Treated bars of grade Fe-500D or morekgû50.6.2.1:Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x15 cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 15cm in: CM 1:6 ( 1 cement :6 coarse sand) etc complete
50.6.2.2:Solid masonry using pre cast solid blocks (factory made) of size 30x20x15cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level with thickness 15cm in : CM 1:6 ( 1 cement : 6 coarse sand) etc complete(
50.6.3.2:Solid block masonry using pre cast solid blocks (Factory made) of size 40x20x10 cm or nearest available size confirming to IS 2185 part I of 1979 for super structure up to floor two level for 10 cm thick wall in : CM 1:6 ( 1 cement : 6 coarse sand) including cost of scaffolding complete—10.28:Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)@13.1.1:12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)m13.7.1:12 mm cement plaster finished with a floating coat of neat cement of mix:1:3 ( 1 cement : 3 fine sand)‚50.13.1:9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc completeŠ13.43.1:Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface:Water thinnable cement primer
13.48.1:Finishing with Deluxe Multi surface paint system for interiors and exteriors using primer as per manufacturers specifications:Two or more coats applied on walls @ 1.25 ltr/10 sqm over and including one coat of special primer applied @ 0.75 ltr /10 sqmû9.48.2:Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to openings/ wooden frames with rawl plugs screws etc1
50.9.1.1:Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack woodc
50.9.2.1:Providing and fixing paneled and glazed shutters for doors, windows and clerestory windows, 35 mm thick shutters including ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineerin - charge using Anjili/ Jack woody9.74.2:Providing and fixing bright finished brass tower bolts (barrel type) with necessary screws etc. complete:200x10 mmnoj21.1.1.2:Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately): For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)M
21.1.2.2:For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)ó21.11.2:Providing and fixing stainless steel (SS 304 grade) adjustable friction window stays of approved quality with necessary stainless steel screws etc. to the side hung windows as per direction of Engineer - in-Charge complete.255 x 19 mmÔ21.13:Providing and fixing Brass100 mm mortice latch and lock with 6 levers without pair of handles ( best make of approved quality ) for aluminum doors including necessary cutting and making good etc. completeeachÌ21.15.2:Providing and fixing aluminium casement windows fastener of required length for aluminium windows with necessary necessary screws etc. complete.Powder coated minimum thickness 50 micron aluminiumÅ21.16.2:Providing and fixing aluminium round shape handle of outer dia 100 mm with SS screws etc. complete as per direction of Engineer-in-Charge.Powder coated minimum thickness 50 micron aluminiumo
21.3.1:Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer - in -Charge. ( Cost of aluminium snap beading shall be paid in basic item):With float glass panes of 4.0 mm thickness (weight not less than 10kg/sqm)11.47.2:Providing and laying Vitrified tiles in different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS : 15622, of approved brand & manufacturer,in all colours and shade, in skirting, riser of steps, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately).Size of Tile 600x600 mm7
11.48.2:Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg). including filling /grouting and finishing complete as per direction of Engineer-in-charge.Size of Tile 600x600 mm—
11.41.2:Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 600 x 600 mm.
18.48:Providing and placing on terrace (at all floor levels) polyethylene water storage tank :ISI 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank.Litre8
50.18.7.2.1:Providing and fixing PVC pipes, fittings including fixing the pipe with claps at 1.00 metre spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 20 mm dia 12Kgf/cm2 - Internal work - Exposed on wallmetre4
50.18.7.4.

2:Providing and fixing PVC, pipes fittings including fixing the pipe with clamps at 1.00 m spacing. this includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 32 mm dia 6 Kgf/cm2 - internal work- Exposed on wall\
50.18.8.2.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work,including cutting chased and making good the wall etc. 20 mm pipe 12 Kgf/cm2]
50.18.8.3.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 25 mm pipe 12 kgf/cm2\
50.18.8.4.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge. Concealed work, including cutting chases and making good the wall etc. 32 mm pipe 10Kgf/cm24
50.18.9.15.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 40 mm dia 10Kgf/cm2- External work- Exposed on wall6
50.18.9.16.1:Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 50 mm dia 10Kgf/cm2 - External work - Exposed on wallÕ50.18.9.5.1:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching refilling & testing of joints complete as per direction of Engineer in Charge 40 mm dia

振㉭S㄀⸸㔱㈮债潲楶楤杮愠摮映硩湩⁧牢獡⁳楢⁢潣正漠⁦灡牰癯摥焠慵楬祴㨠〲洠潮業慮潢敲w㄀⸸㜱㌮债潲楶楤杮愠摮映硩湩⁧畧敭慴慧整瘠污敶眠瑩⁨⹃⹉眠敨汥漠⁦灡牰癯摥焠慵楬祴⠠捳敲敷⁤湥⥤㨠〴洠潮業慮潢敲w㄀⸸㜱㐮债潲楶楤杮愠摮映硩湩⁧畧敭慴慧整瘠污敶眠瑩⁨⹃⹉眠敨汥漠⁦灡牰癯摥焠慵楬祴⠠捳敲敷⁤湥⥤㨠〵洠潮業慮潢敲Ŝ㔀⸰㠱㠮㘮㈮债潲楶楤杮愠摮映硩湩⁧噐⁃楰数ⱳ映瑩楴杮⁳湩汣摵湩⁧楦楸杮琠敨瀠灩⁥楷桴挠慬灭⁳瑡ㄠ〮‰灳捡湩⹧吠楨⁳湩汣摵獥樠楯瑮湩⁧景瀠灩獥☠映瑩楴杮⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡獥愠摮洠歡湩⁧潧摯琠敨眠污瑥⹣㔠‰浭瀠灩⁥‶杫⽦浣儲
〵ㄮ⸸⸸⸸㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡獥愠摮洠歡湩⁧潧摯琠敨眠污瑥⹣㜠‵浭瀠灩⁥‶杋⽦浣儲
〵ㄮ⸸⸸⸹㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥‬楦瑴湩獧椠据畬楤杮映硩湩⁧桴⁥楰数眠瑩⁨汣浡獰愠⁴⸱〰洠猠慰楣杮‮桔獩椠据畬敤⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮愠摮琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椭⵮桃牡敧‮潃据慥敬⁤潷歲‬湩汣摵湩⁧畣瑴湩⁧档獡摥愠摮洠歡湩⁧潧摯琠敨眠污瑥⹣ㄠ〱洠楰数㘠杫⽦浣鈲〵ㄮ⸸⸹ㄲ债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧愯捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㜠‵浭搠慩䔠扬睯㔀⸰㠱㤮㈮⸱㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴㜭‵浭搠慩㐠‵敤牧敥䔠扬睯㔀⸰㠱㤮㈮⸱㨶牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭㔷㝸砵㔷洠楤⁡潄牯吠敥™㔀⸰㠱㤮㈮⸱㨷牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠ㜠‵浭搠慩嘠湥⁴潣汷–㔀⸰㠱㤮㈮⸲㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠㄠ〱洠楤⁡汅潢ꁷ〵ㄮ⸸⸹㈲ㄮ㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ⴠㄠ〱洠楤⁡潓正瑥 潣灵楬杮¡㔀⸰㠱㤮㈮⸲㨲牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⁳ 捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭ㄱ‰浭搠慩㐠‵敤牧敥䔠扬睯™㔀⸰㠱㤮㈮⸲㨳牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳愠捣獥潳楲獥映牯删杩摩倠䍖瀠灩獥‬湩汣摵湩⁧潪湩楴杮眠瑩⁨噐⁃潳癬湥⁴散敭瑮ㄭ〱洠楤⁡潄牯䔠扬睯 㔀⸰㠱㤮㈮⸲㨶牐癯摩湩⁧湡⁤楦楸杮倠䍖洠畯摬摥映瑩楴杮⽳捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴‭ㄱ砰ㄱ砰ㄱ‰浭搠慩䐠潯⁲整饥〵ㄮ⸸⸹㈲㠮债潲楶楤杮愠摮映硩湩⁧噐⁃潭汵敤⁤楦瑴湩獧⼠捡散獳牯敩⁳潦⁲楒楧⁤噐⁃楰数ⱳ椠据畬楤杮樠楯瑮湩⁧楷桴倠䍖猠汯敶瑮挠浥湥⁴ㄭ〱洠楤⁡敖瑮挠睯�〵ㄮ⸸⸹⸸㨱牐癯摩湩⁧湡⁤楦楸杮倠䍖瀠灩獥椠据畬楤杮⁳潪湩楴杮漠⁦楰数⁳楷桴漠敮猠整⁰噐⁃潳癬湥⁴散敭瑮‬牴湥档湩Ⱨ爠晥汩楬杮☠琠獥楴杮漠⁦潪湩獴挠浯汰瑥⁥獡瀠牥搠物捥楴湯漠⁦湅楧敮牥椠桃牡敧‮㔷洠楤⁡‶杋⽦挠㉭Ö㔀⸰㠱㤮㤮ㄮ债潲楶楤杮愠摮映硩湩⁧噐⁃楰数⁳湩汣摵湩獧樠楯瑮湩⁧景瀠灩獥眠瑩⁨湯⁥瑳灥倠䍖猠汯敶瑮挠浥湥ⱴ琠敲据楨杮‬敲楦汬湩⁧…整瑳湩⁧景䨠楯瑮⁳潣灭敬整愠⁳数⁲楤敲瑣潩景攠杮湩敥⁲湩挠慨杲⹥ㄱ‰浭搠慩㘠杋⽦浣딲㈲㔮债潲楶楤杮愠摮氠祡湩⁧慷整⁲牰潯楦杮琠敲瑡敭瑮椠畳歮湥瀠牯楴湯漠⁦䍗ⱳ戠瑡牨潯瑥⹣‬祢愠灰祬湩⁧散敭瑮猠畬牲⁹業數⁤楷桴眠瑡牥瀠潲景湩⁧散敭瑮挠浯潰湵⁤潣獮獩楴杮漠⁦灡汰楹杮㨠愠 楆獲⁴慬敹⁲景猠畬牲⁹景挠浥湥⁴⁀⸰㠴‸杫猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠㈮㌵欠⽧煳⹭吠楨⁳慬敹⁲楷汬戠⁥污潬敷⁤潴愠物挠牵⁥潦⁲‴潨牵⹳戠 敓潣摮氠祡牥漠⁦汳牵祲漠⁦散敭瑮䀠〠㈮㈴欠⁧猯浱洠硩摥眠瑩⁨慷整⁲牰潯楦杮挠浥湥⁴潣灭畯摮䀠〠ㄮ㘲欠⽧猠浱‮桔獩氠祡牥眠汩敢愠汬睯摥琠楡⁲畣敲映牯㐠栠畯獲映汯潬敷⁤楷桴眠瑡牥挠牵湩⁧潦⁲㠴栠畯獲‮桔⁥慲整椠据畬敤⁳牰灥牡瑡潩景猠牵慦散‬牴慥浴湥⁴湡⁤敳污湩⁧景愠汬樠楯瑮ⱳ挠牯敮獲‬番据楴湯⁳景瀠灩獥愠摮洠獡湯祲眠瑩⁨潰祬敭⁲業數⁤汳牵祲됮
㜱㈮㈮债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮瀠摥獥慴祴数眠瑡牥挠潬敳⁴䔨牵灯慥祴数圠䌮‮慰⥮眠瑩⁨敳瑡愠摮氠摩‬〱氠瑩敲氠睯氠癥汥眠楨整倠嘮䌮‮汦獵楨杮挠獩整湲‬湩汣摵湩⁧汦獵⁨楰数‬楷桴洠湡慵汬⁹潣瑮潲汬摥搠癥捩⁥栨湡汤⁥敬敶⥲‬潣普牯業杮琠卉㨠㜠㌲ⰱ眠瑩⁨污楦瑴湩獧愠摮映硩畴敲⁳潣灭敬整‬湩汣摵湩⁧畣瑴湩⁧湡⁤慭楫杮朠潯⁤桴⁥慷汬⁳湡⁤汦潯獲眠敨敲敶⁲敲畱物摥场䌮‮慰楷桴䤠䥓洠牡敫⁤汢捡潳楬⁤汰獡楴⁣敳瑡愠摮氠摩Ÿ㄀⸷㌲债潲楶楤杮愠摮映硩湩⁧桷瑩⁥楶牴潥獵挠楨慮映慬⁴慢正漠⁲慷汬挠牯敮⁲祴数氠灩数⁤牦湯⁴牵湩污戠獡湩漠⁦㌴砰㘲砰㔳‰浭漠⁲㐳砰ㄴ砰㘲‵浭猠穩獥爠獥数瑣癩汥⹹ŀ㄀⸷⸷㨲牐癯摩湩⁧湡⁤楦楸杮眠獡⁨慢楳楷桴䌠䤮‮牢捡敫獴‬㔱洠⹃⹐戠慲獳瀠汩慬⁲慴獰‬㈳洠⹃⹐戠慲獳眠獡整漠⁦瑳湡慤摲瀠瑡整湲‬湩汣摵湩⁧慰湩楴杮漠⁦楦瑴湩獧愠摮戠慲正瑥ⱳ挠瑵楴杮愠摮洠歡湩⁧潧摯琠敨眠污獬眠敨敲敶⁲敲畱物㩥桗瑩⁥楖牴潥獵䌠楨慮圠獡⁨慢楳楳敺㘠〳砠㐠〵洠楷桴愠猠湩汧⁥㔱洠⹃⹐戠慲獳瀠汩慬⁲慴쥰〵ㄮ⸷⸱㨵畓灰祬湩⁧湡⁤楦楸杮䌠⁐效污桴䘠畡散⁴畳数楲牯焠慵楬祴⠠䨠条牵漠⁲煥癵污湥⁴慭敫⤠椠据畬楤杮挠獯⁴景洠瑡牥慩獬愠摮氠扡畯⁲档牡敧⁳瑥⁣潣灭敬整愠⁳数⁲桴⁥楤敲瑣潩景猠瑩⁥湅楧敮牥椭⵮档牡敧鈮㠱㔮⸳㨱牐癯摩湩⁧湡⁤楦楸杮䌠倮‮牢獡⁳湡汧⁥慶癬⁥潦⁲慢楳業數⁲湡⁤敧獹牥瀠楯瑮⁳景愠灰潲敶⁤畱污瑩⁹潣普牯業杮琠卉›㤸ㄳ㔱洠潮業慮潢敲Ã㄀⸸㠵㈮ㄮ债潲楶楤杮愠摮映硩湩⁧呐呍朠慲楴杮漠⁦灡牰癯摥焠慵楬祴愠摮挠汯畯⹲刊捥慴杮汵牡琠灹⁥楷桴漠数慮汢⁥楣捲汵牡氠摩㔱‰浭渠浯湩污猠穩⁥煳慵敲ㄠ〰洠楤浡瑥牥漠⁦桴⁥湩敮⁲楨杮摥爠畯摮朠慲楴杮ȇ㤀ㄮㄲ债潲楶楤杮愠摮映硩湩⁧楆敢⁲汇獡⁳敒湩潦捲摥瀠慬瑳捩⠠剆⥐䐠潯⁲牆浡獥漠⁦牣獯⵳猠捥楴湯㤠‰浭砠㐠‵浭栠癡湩⁧楳杮敬爠扥瑡⁥景㌠′浭砠ㄠ‵浭琠敲散癩⁥桳瑵整⁲景㌠‰浭琠楨正敮獳‮桔⁥慬業慮整⁤桳污敢洠畯摬摥眠瑩⁨楦敲爠獥獩慴瑮朠慲敤甠獮瑡牵瑡摥瀠汯敹瑳牥爠獥湩愠摮挠潨灰摥洠瑡‮潄牯映慲敭氠浡湩瑡⁥桳污敢㈠洠桴捩湡⁤桳污敢映汩敬⁤楷桴猠極慴汢⁥潷摯湥戠潬正椠污桴⁥桴敲⁥敬獧‮桔⁥牦浡⁥桳污敢挠癯牥摥眠瑩⁨楦敢⁲汧獡⁳牦浯愠汬猠摩獥‮⹍⹓猠慴⁹桳污敢瀠潲

ided at the bottom to steady the frame.9.122.1:Providing and fixing to existing door frames.30 mm thick Glas Fibre Reinforced Plastic (FRP) panelled door shutter of required colour and approved brand and manufacture, made with fire - retardant grade unsaturated polyester resin, moulded to 3 mm thick FRP laminate for forming hollow rails and styles, with wooden frame and suitable blocks of seasoned wood inside at required places for fixing of fittings, cast monolithically with 5 mm thick FRP laminate for panels conforming to IS : 14856, including fixing to frames.
50.10.1:Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. completeè50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete212.50:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.‚13.61.1:Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new workB
51.19.ST4:Supplying and installing ready made PVC Septic tank including the cost of carriage, trenching, placing at the level below ground level as specified as per the direction of engineer in charge (Provision for CC/RCC/Sand/06mm aggregate for the preparation of bed shall be paid separately) 4. 35 to 50 flush capacity