Drip irrigation renovation of canal tractor passage and other works in SSF Kankol

Amount

Improving infrastructural facilities

OD1485/2023-2024:Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including disposal of excavated earth, lead up to 50 m and lift up to 1.5 m, disposed earth to be levelled and neatly dressed.All kinds of soil

OD1641/2023-2024:Supply and installation of monoblock centrifugal pump set with BEE rating 4 star or above discharge above 3600 lph at 20m head , 1HP or nearest available size considering the performance curve as directed by the engineer in charge including all cost of fittings for connecting suction from existing 1.5" suction pvc lineand discharge through 1.5 " pvc line, all electrical connection accessories , labour etc complete.

50.18.9.6.2:Providing and fixing PVC pipes includings jointing of pipes with one step PVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. 50 mm dia 6 Kgf/cm2

OD1626/2023-2024:Providing and fixing PVC ball Valve of approved quality 50 mm dia

OD1629/2023-2024:Supply and fitting 7m3/hr Disc filter with fittings etc complete

OD1628/2023-2024:Supply and installation of 50 mm ventury assembly for Fertigation

OD1625/2023-2024:Supply and fixing poly gromet take off 12 mm for taking connection from PVC sub main

OD1623/2023-2024:Supplying and fixing 12mm lateral end stop

OD1631/2023-2024:Supplying and laying12mm LLDPE laterals

OD1624/2023-2024:Supplying and laying 6mm LLDP micro tube

OD1627/2023-2024:Supplying and fixing 8 lph on line pressure compensating drip emitters

OD1630/2023-2024:Supplying and fixing 50 mm flush valve

15.2.1:Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.9.2:Demolishing stone rubble masonry manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer -in- Charges:In cement mortar

15.17.2:Dismantling steel work in single sections including dismembering and stacking within 50 metes lead in:Channels, angles, tees and flats

16.70.1:Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts , bolts and washers as required complete as per the direction of Engineer-in- charge.Made of G.I. wire of dia 4 mm

OD1638/2023-2024:Engaging laboureres for rising up the fallen chain link fencing system of approax span 2.3 height 1.25 , fixed by concrete posts of 30cm x 30 cm x 30cm and placing over the level masonry /concrete belt at plinth level, as per the direction of the engineer in charge

4.1.8:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

OD1523/2023-2024:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site

OD1530/2023-2024:DRY RUBBLE MASONRY _ Dry rubble without concrete levelling course masonry with good quality blasted rubble including packing to compactness to lines and levels cost and conveyance of all materials labour charges etc. complete as per direction of Departmental officers at site - Using departmental stones

5.1.3:Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:2:4 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

5.9.1:Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.9.6:Centering and shuttering including strutting, etc. and removal of form for:Columns, Pillars, Piers, Abutments, Posts and Struts

5.22.6:Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

Bidder Name

A ABDUL RAHMAN