Boundary wall alongwith retaining wall Shaheed Samrak Daghwani at Tihra GP Kot. VKV 2025 817 Deposit work Construction of boundary wall and providing paver work

Amount

Excavation in foundations, trenches etc. in earth work, lift upto 1.50 Metres stacking the eacavated soil not more than 3 metres clear from the edge of the excavation and then returning the stacked soil in 15cm. layers, when required in to plinths sides of foundations etc., consolidating each deposited layer by ramming and watering and then disposing of all surplus excavated earth as directed with in a lead of 20 metres.

Providing and laying cement concrete work 1:1.5:3 (1 cement : 1.5 sand :3 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in :

Foundation, footing basis of column etc. and mass concrete

Providing and laying Cement concrete flooring 1:2:4 (1 cement: 2 sand: 4 graded stone aggregate 20mm nominal size) laid in one layer finished with a floating coat of neat cement. (40mm thick)

Providing and laying cement concrete 1:3:6 (1 cement: 3 sand: 6 graded stone aggregate 20mm nominal size) and curing complete excluding cost of form work in.

Walls including attached buttresses, pilasters and their caps and bases string courses upto floor two level.

Providing and laying heavy duty precast cement concrete interlocking paver blocks vibro compacted upto M50 grade i/c border or kurb block grey or coloured over sub-base of concrete with 25mm thick average thickness of cement mortar 1:4 (1 cement : 4 sand) laid over and joined with neat cement slurry mixed with pigment to match the shade of blocks i/c curing rubbing & polishing complete (Sub base concrete floor to be paid for separately)

40 mm thick

Providing form work with steel plates 3.15mm thick welded with angle iron 30x30x5mm so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden batten and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 metres and removal of the same for insitu reinforced concrete & plain concrete work in.

Vertical surfaces such as walls (any thickness) partition and the like including attached pillasters, buttresses, plinth and string courses and the like.

Steel work welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of red lead paint. In gratings framed guard bars, ladders, railling, brackets and similar works.

Applying priming coat over new steel & other metal surfaces after & including preparing the surface by thoroughly cleaning oil grease dirt and other foreign matter and scoured with wire brushes fine steel wool scrapers and sand paper complete : With ready mixed priming paint brushing red lead,Red-oxide/zinc oxide chrome.

Painting one coat (excluding priming coat) on previously painted steel and other metal surfaces under coat with readymixed paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter.With readymixed paint other than white.

RAJ KUMAR (BID ID -582664)

Sudhir Thakur (BID ID -582658)