Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | L1₹5.0 LAccepted-AOC | ₹5.0 L | L1 | Accepted-AOC L1 |
| 2 | L2₹5.0 L+₹1,022 (0.21%)Rejected-AOC | ₹5.0 L+₹1,022 (0.21%) | L2 | Rejected-AOC L2 |
| 3 | Rejected-Technical | - | - | Rejected-Technical L1 |
| Sl No | Description | Qty | Unit | JACOB ABRAHAM L3 | The Metal Industries Ltd L1 | TINTUMON T L2 |
|---|---|---|---|---|---|---|
| 1.00MINI MCF construction | ||||||
| 1.00 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 1,970.17 | kg | 174.85 ₹3,44,484.57 | 170 ₹3,34,929.24 Lowest | 174.49 ₹3,43,775.31 |
| 1.00 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 151.2 | sqm | 247.89 ₹37,480.97 | 100 ₹15,120 Lowest | 247.39 ₹37,405.37 |
| 1.00 | OD235822/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.35 mm (+0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer - in - charge . The sheet shall be fixed using self drilling/self tapping screws of size (5.5* 55 mm ) with EPDM seal, complete upto any pitch in horizontal /vertical of curved surfaces, excluding the cost of purlins, rafters and trusses and including cuting to size and shape whatever required. | 67.5 | sqm | 608.68 ₹41,085.9 | 100 ₹6,750 Lowest | 607.44 ₹41,002.2 |
| 1.00 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | 0.97 | cum | 9,051.25 ₹8,797.82 | 100 ₹97.2 Lowest | 9,032.78 ₹8,779.86 |
| 1.00 | 9.55.4:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished
with necessary screws etc. complete :50x37x1.50 mm | 108 | no | 20.07 ₹2,167.56 | 50 ₹5,400 | 20.03 ₹2,163.24 Lowest |
| 1.01 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | 8 | no | 168.53 ₹1,348.24 | 60 ₹480 Lowest | 168.19 ₹1,345.52 |
| 1.01 | 13.71:Lettering with black Japan pint of approved brand and manufacture | 225 | per Letter per cm height | 6.21 ₹1,397.25 | 26 ₹5,850 | 6.2 ₹1,395 Lowest |
| 1.01 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 292.32 | kg | 183.31 ₹53,585.18 | 30 ₹8,769.6 Lowest | 182.93 ₹53,474.1 |
| 1.01 | OD235823/2025-2026:Supplying and fixing 200 mm PVC gutter including cost conveyance labour as per direction from departmental officers | 27 | metre | 270.05 ₹7,291.35 | 20 ₹540 Lowest | 269.5 ₹7,276.5 |
Tender Value
₹5.1 L
EMD Value
₹12,695
Closing Date
13 Feb 2026, 4:00 pmClosed
ASSISTANT ENGINEER
ASSISTANT ENGINEER LID AND EW SECTION AYYAPPANCOVIL
Construction and Installation of Mini MCF
2026_LSGD_833198_5
03//2025-26/AE/LIDEW/AYK
Open Tender
Civil Works - Others
Item Rate
120 days
AYYAPPANCOVIL
Please refer Tender documents.
9 documents required · 9 mandatory
₹1,120
Yes
₹12,695
Yes
13 Jul 2026
6 Feb 2026
16 Feb 2026
6 Feb 2026
13 Feb 2026
6 Feb 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1MINI MCF construction | |||||
| 1.001 | 10.25.2:Item Shifted to Sub head 14 as item 14.73
Item Shifted to head 14 as item 14.74
Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required.In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works | 0.8 | kg | - | - |
| 1.002 | 13.52.1:Finishing with Epoxy paint (two or more coats) at all locations prepared and applied as per manufacturer's specifications including appropriate priming coat, preparation of surface, etc. complete.On steel work | 1 | sqm | - | - |
| 1.003 | OD235822/2025-2026:Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in charge) 0.35 mm (+0.05 % ) total coated thickness with zinc coating 120 grams per sqm as per IS 277 in 240 mpa steel grade 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer - in - charge . The sheet shall be fixed using self drilling/self tapping screws of size (5.5* 55 mm ) with EPDM seal, complete upto any pitch in horizontal /vertical of curved surfaces, excluding the cost of purlins, rafters and trusses and including cuting to size and shape whatever required. | - | sqm | - | - |
| 1.004 | 4.1.3:Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand (zone-III)derived from natural sources : 4 graded stone aggregate 20 mm nominal size derived from natural sources) | - | cum | - | - |
| 1.005 | 9.55.4:Providing and fixing ISI marked IS : 1341 M.S. pressed butt hinges bright finished
with necessary screws etc. complete :50x37x1.50 mm | - | no | - | - |
| 1.006 | 50.9.15.1:Supplying and fixing 200 mm Aluminium aldrop | - | no | - | - |
| 1.007 | 13.71:Lettering with black Japan pint of approved brand and manufacture | - | per Letter per cm height | - | - |
| 1.008 | 50.10.2:Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete | 1 | kg | - | - |
| 1.009 | OD235823/2025-2026:Supplying and fixing 200 mm PVC gutter including cost conveyance labour as per direction from departmental officers | - | metre | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
fin_eval.pdf
aoc.pdf
finance_1402031.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.28 MB
viewsbd.pdf
Tender Documents • 1.64 MB
BOQ_1402031.xls
BOQ • 0.30 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .