Supply and laying of 4C 50 Sqmm copper armoured power

Supply and laying of 4C 50 Sqmm copper armoured power

Supplying of the 4Core X 50Sqmm one length Copper Armored PVC insulated PVC sheathed XLPE power cable From Transformer to Power house

Supplying of the 200A 3 Pole 25 KA Molded Case Circuit Breakers MCCB

Laying and fixing PVC insulated and PVC sheathed XLPE power cable of 1.1 kV grade on wall surface as required

Supplying and making end termination with brass compression gland of cable

Supplying and filling in plinth with sand under floors including watering ramming consolidating and dressing complete with all labour materials transport in hilly area

Laying one number PVC insulated and PVC sheathed XLPE copper armoured 1.1 kV cable in existing cement trench removing sand cushioning placing new cable properly with all labour tools

Installation of 200A 3 pole MCCB on existing DB including dismantling old MCCB making connections with suitable lugs and cables tightening terminals testing and commissioning as required.

Supplying and fixing 400 400 15 mm seasoned wooden board for mounting 200A porcelain Kit Kat fuse at the powerhouse including cutting drilling anchor fasteners holes.

Supplying and installing 200A porcelain KitKat fuse on pre fixed wooden board

including incoming outgoing cable connections with copper lugs

Supplying and fixing 200A neutral link suitable for terminating multiple neutral cables in LT distribution system mounted on pre fixed wooden board

Removing outer sheath of 4C 50 sqmm copper armoured XLPE cable up to 2 m and terminating each core at energy meter using heat shrink sleeves including supply laying

Providing laying and fixing 75 mm dia medium class GI pipe in RCC road with GI fittings including 75 mm trenching refilling with RCC materials and using all necessary machinery tools etc.

Cable jointing of existing 4C 50 sqmm XLPE copper armoured cable using approved heat shrink kit including stripping cleaning crimping with copper lugs heat-shrink sleeves sealing insulation materials

Supplying and fixing 6 mm multiwall polycarbonate sheet as shed roofing over energy meter enclosure 1 m length plus 1 m projection with GI supports cutting fixing with screws edge channels

Making 4 inch hole in lighthouse entrance gate wall 600 mm thick for cable entry using necessary heavy machinery and tools and refilling as required

Add extra charges for executing electrical work at Dolphin Nose Lighthouse in hill area considering difficult terrain limited access higher labor effort and transportation challenges

Miscellaneous items including SS screws anchor fasteners nuts and bolts as required GI clamps for cable fixing copper lugs and other necessary materials.

Supply and laying of mains Power Cable (4 Core x 50 Sqmm Copper Armoured) from Transformer to Powerhouse and Associated Electrical Works at Dolphin’s Nose Lighthouse cum DGPS Station