Release of connections work on Turn Key Basis under EDD-I, II, III Bahraich

Amount

All Materials Provided by the Contractor as per Resspo Norms PART-A (Supply)

PCC Pole 8.5 Mtr long

AB Cable 1x25+1x16mm2

Stone Pad

11 KV 'V' Type Steel X-Arm

Tee off Channel

11 KV Pin Insulator with Pin

11 KV Disc Insulator with Fitting

ACSR Weasel Conductor

Stay Set

Earthing

GI Barbed Wire

Sub Station Base Angle

MS Channel Dropper

Top Channel

Clamp for Top. Tee Drp, Guard etc.

F-Bracket Clamp

Danger Board, No.-Plate Bolth with

LT Clamp with Eye Hook

Suspension Clamp

Pieresing Clamp

V-Type X-Arm Holding Clamp

Dead End Clamp

Concreting of Stay

Clamp for D.B.

Clamp for T/F

LT PVC Cable

Distribution Box

PART-B (Erection Work)

Fabrication & Erection of Single PCC Pole (8.5 Mtr Long) for 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Fabrication & Erection of Double PCC Pole (8.5 Mtr Long) for 11 KV & HT line alongwith fitting of all accessories on pole including dragging of pole from Dump Site to pit site with complete fitting. All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Supply, Grouting nozzling & binding of stay sets with stay clamp complete fittings. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Grouting of Poles with 1:4:8 CC ratio of cement, sand & brick ballast, backfilling of pits with mud completely. (All the materials for fabrication shall be arranged by the contractor as per RESPO Norms).

Earthing Complete at 11/0.4 KV T/F as per RESSPO Norms.

Earthing Complete at HT/LT Pole as per RESSPO Norms.

Laying & Commissioning of LT PVC Cable as per respo norms.

Errection & Commissioning of AB cable 1x25+1x16mm2 including fitting of Accessories (All Accessories shall be Provided by the Contractor).

Carriage & Mounting & Jumpring of 16 KVA T/F with complete fitting.

Carriage & Mounting & Jumpring of 25 KVA T/F with complete fitting.

Fitting of Three Phase Distribution Box

Laying, stringing, sagging, binding & jumpering of conductors of 3 phase, 4 wire guard wire the help of necessory clamp and binding wire proper connector & Clamp (Complete Fitting.)

M/s S S Associates