Providing and Fixing of LED Luminaries Light Fittings for 33KV AMP Solar Bays alongwith other associated works at 132KV Substation Nawabganj under E.T.D.-II, Bareilly

Amount

Providing of Outdoor Switchyard Lighting Arrangements with L.E.D. Luminaries Light Fittings alongwith associated Works in Augmented Switchyard due to construction of Two No. 33KV AMP Solar Bay at 132 Sub Station Nawabganj with all Cost of Men, Materials, Misc. Consumables, T&Ps, Transportation of Materials for Satisfactory Completion of the Work as per Technical Specifications and Direction of the Supervising Engineer, as per Details below :

Switchyard Lighting :

Providing of Junction Box of size 280 × 225 × 150 mm duly made of 16 SWG Sheet and Painted with Smoke Grey Colour Synthetic Enamel Paint and Fitted with 1 No. 6 Amp. SP MCB on Anodized M.S. Channel, 1 No. Bakelite Fuse Fitting with 6 Amp. NS 6 type HRC Fuse, 1 No. Copper Neutral Link, Bakelite Terminal Block of 4 Terminals, Cable Glands suitable for 2C / 4C × 2.5 mm2 size Incoming / Outgoing Control Cables etc., then Installation of Junction Box on G.I. Column Structures at designated Height with the help of suitable M.S. Clamps alongwith Earthing of the Junction Box with 12 SWG G.I. Wire including Cable Terminations with Satisfactory Testing & Commissioning.

Providing & Fixing of G.I. Pole Bracket duly made of 40 mm dia. 1.2 Meter Long ‘B’ Class Pipe and Bent at One End by Quarter Circle in 1.0 Meter at an Angle of 300 for Fixing of 125 Watt LED Street Light Luminaries Fittings on G.I. Column Structures with help of M.S. Clamps.

Providing & Fixing of 120 Watt L.E.D. Street Light Luminaries Fittings of Philips / Compton Greaves / Havells make in Single Piece Die Cast Aluminium Alloy Housing with Pot Optics Reflector & Toughened Clear Glass Cover with Frame for Lamp Compartment inlcuding Cable Terminations.

Cable Laying & Termination :

Laying of Following sizes PVC insulated Copper Control Cables from L.T. A.C.D.B. Cubical to various Junction Boxes & Junction Boxes to Junction Boxes for Switchyard Lighting through Excavated Trench of size 300 × 600 mm, Covering the Cables with River Sand & Brick Lining Along and Over the Cable, then Back Filling & Leveling of the Trench after Laying of Cables :

(a) 4C × 2.5 mm2 size Control Cable

(b) 2C × 2.5 mm2 size Control Cable

Laying of 2C × 2.5 mm2 size Control Cables form Junction Box to LED Street Light Luminaries Fittings through Inside the M.S. Pole / GI Structure including necessary Fixing of Cable on GI Structure.

M/s S.S. Refregeration

Ashu air conditiong service