PROVISION OF GUARD ROOM WITH ALLIED FACILITIES AT ICGS BEYPORE AND PROVISION OF EXTERIOR EMULSION PAINT ON EXTERIAL SURFACES OF IMPORTANT BUILDINGS, WATER PROOFING TREATMENT TO ROOF AT ICGS BEYPORE

Amount

Surface excavation not exceeding 30cm deep and averaging 15cm deep and getting out in soft/loose soil complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth, for foundation etc. or for shafts, wells, cesspits,manholes, pier holes, etc. n exc 10 sq m on plan and n exc 1.5 m in depth and getting out in soft/loose soil and getting out complete all as specified and directed.

Material and labour for Plain cement concrete 1:4:8, type D2, using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work all as specified and as directed.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in foundations including raft, footings , plinth beam, bases for columns, basement slabs, under-reamed piles and mass concrete and similar work complete all as specified and as directed

Material and Labour for reinforced cement concrete M30 design mix using 20mm graded stone aggregate in Columns, pillars, piers, posts and struts complete all as specified and as directed

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in as in beams, cantilever, lintels over 1.5M span etc complete all as specified and as directed.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in slabs supported on wall, beams and columns and similar work complete all as specified and as directed.

Material and labour for reinforced cement concrete M-30 design mix using 20 mm graded stone aggregate as in chajjas and similar work complete all as specified and as directed.

Returning, filling, including spreading leveling, watering and well ramming in layers not exc 25 cm thick in soil all as specified and directed.

Removing excavated soil to a distance not exc 50m and deposited where as directed at a level not exc 1.5 m above the starting point complete all as specified and as directed.

Material and Labour for red earth/moorum filling in floors or pavings, laid in layers n exc 15 cm thick spread, levelled and rammed including watering all as specified and as directed.

Use and waste of formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter rough finished surfaces complete all as specified and as directed.

Use and waste of formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings, and similar work, not exceeding 200 mm thick etc, fair finshed surfaces of concrete (Horizontal or sloping) complete all as specified and as directed.

Use and waste of formwork to sides of pillars, post, struts, piers, coloumn and stanchions, square, rectangular or polygonal, fair finished surfaces of concrete complete all as specified and as directed.

Use and waste of formwork to edges of concrete flats, breaks in floors, openings in concrete walls, floors and roofs and sides of RCC/PCC bands in walls, horizontal or sloping, and similar work exc 10cm but n exc 20cm complete all as specified and as directed.

Use and waste of formwork to chullah hoods, chajjas, troughs and similar items including edges complete all as specified and as directed.

Use and waste of formwork to sides and soffits of floor or roof beams, beam haunchings, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc complete all as specified and as directed.

Material and Labour for TMT(CRS/HCR) bar 10mm dia and over, cut to length, bent to shape required, including cranking,bending spirally for hooping ,for columns,hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed.

Material and labour for TMT (CRS/HCR) bar 6 to 8mm dia, cut to length, bent to shape required including bending or hooking ends and binding with and including mild steel wire (annealed) not less than 0.9m dia complete as in reinforcement complete all as specified and as directed.

Material and labour for TMT bars(CRS/HCR), 5 mm to 10 mm dia., cut to length, bent to shape required, in stirrups, spacers and binders and binding with mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and directed.

Material and labour for Precast cement concrete solid block masonry using soild PCC block grade C4, exceeding 10 cm in width and built in cement mortar 1:6 complete all as per specified and as directed.

Material and labour for hard core with broken stone or boulders of gauge not exceeding 63 mm, deposited, spread, and levelled in layers not exceeding 15 cm thick watered and rammed to a true surface all as specified and as directed.

Material and labour for 75mm thick plain cement concrete 1:4:8 type D-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Material and Labour for Non-skid light coloured Ceramic tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 Sqm but not excceding 0.18 Sqm, in floors etc, set and jointed in cement mortar and pointed in white or coloured cement to match, laid over and including 15 mm thick screed bed in CM 1:4 complete all as specified and as directed.

Material and labour for providing plain cement concrete 1:2:4 mix type B0, using 12.5mm graded stone aggregate as in under layer to flooring 25mm thick finished rough to reiceve toping complete all as specified and as directed.

Material and labour for glazed ceramic light coloured tiles in vertical surface 450x350x7mm set and jointed in neat cement slurry over and including backing coat of 10mm thick in CM 1:3 complete all as specified and directed.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C2 using 40 mm graded stone aggregate as in plinth protection finished even and smooth including necessary form work all as specified and as directed.

Material and Labour for 10mm thick rendering on fair faces of brick work or concrete surfaces in cement mortar 1:6, finished even and smooth with out using extra cement complete all as specified and as directed.

Supply and fixing 2nd class hardwood factory made plain framed panelled shutters 35mm thick with lock rail and with panels of 12mm thick commercial veneered particle board veneers on both side or with 9mm thick BWP commercial ply, size of members of shutters as specified in IS 1003-Part-I, kiln seasoned and chemically pressure treated complete all as specified and as directed.

Material and Labour for 35mm thick 2nd class hard wood glazed and skeleton shutters , open rebated and prepared to receive glass, gauze(without sash bars), edges of framing plain, chamfered or rounded. fitted with cut and mitred beads for securing glass, etc.; sizes of me-mbers of shutters as specified in SSR Part I, Section 8, clause 8.24 (a); supplied and fitted to chowkats complete all as specified and directed.

Material and labour for second class hard wood plain solid straight chowkats and frames wrought framed rebated on the solid rounded or chamfered put together with glued pinned at joints, fixed to wall and making good to wall all as specified and directed.

Material and labour for two coat of synthetic enamel paint over a coat of pink primer on wooden surface over 10 cm width and girth including preparation complete all as specified and as directed.

Supply and fix Rotational moulded polyethylene water storage tanks having capacity 750 Ltrs (cylindrical vertical with closed top) hoisted and fixed in position all as specified and directed.

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for ironpipe and fixed 20mm bore complete all as specified and as directed.

Supply and fix 3-layer PP-R polypropylene random copolymer pipes 20mm bore SDR 7.4 UV stabilished and anti microbial welded having thermal stability for hot & cold water including all PP R plain brass threaded fittings fixed complete in position (wall, ceiling & floor) all as specified and directed.

Supply and fix 3-layer PP-R polypropylene random copolymer pipes 25mm bore SDR 7.4 UV stabilished and anti microbial welded having thermal stability for hot & cold water including all PP R plain brass threaded fittings fixed complete in position (wall, ceiling & floor) all as specified and directed.

Supply and fix 20 mm dia Stop valves, cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed.

Supply and fix brass chromium plated bib taps 15 mm bore long nose screwed down screwed for iron pipe or for brass ferrule complete all as specified and directed.

Supply and fix alluminium alloy wire cloth 0.45 mm nominal dia of wire and average width of aperture 1.4mm and fixed with aluminium wire staples, etc complete all as specified and as directed.

Supply and fix 32mm PVC waste pipe with PVC waste coupling 32mm dia of WHB of length of pipe 1150mm complete all as specified and as directed.

Supply and fix 32 mm dia Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed complete all as specified and as directed.

Material and labour for 15 mm thick rendering on brick/concrete surfaces in two layers in CM 1:4, finishing coat of 5mm thick using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Supply only liquid water proofing compound all as specified and as directed.

Material and labour for 5mm thick rendering on concrete surfaces in ceiling in CM 1:4, finished even and smooth without using extra cement complete all as specified and as directed.

Supply and fix 300mm mild steel ordinary rat tail rod pattern springs, incl roller and roller plate complete all as specified and directed.

Supply and fixing aluminium alloy,anodised, sliding door bolt of length 300mm with hasp, staple (bolt type) & fixing clips of sheet, cast or extruded sections & fixing bolts & sliding bolts of extruded section or cast-aluminium alloy complete all specified and as directed.

Supply and fix aluminium anodised ventilator, frame and shutter using standard aluminium section one or more rebates with joint clip and using rubber beading with and including all aluminium fittings and 2 nos hinges etc complete all as specified and directed. Note : Glass panel shall be measured and paid separately.

Supply and fix 3mm thick figured glass, pin headed type and glazing fixed on aluminium jionery with glazing clips in square n exc 0.5 sq. m in each pane complete all as specified and as directed.

Material and labour for preparation of new plastered surface of wall and applying three coats of white wash complete all as specified and directed.

Material and labour for preparation of new plastered surface of ceiling and applying three coats of white wash complete all as specified and directed.

Material and labour for applying two coats of cement based paint wall over a coat of primer including preparation of new surface of wall complete all as specified and directed.

Supply and Fix solid PVC Door Frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS squar tube and fixing in opening as per specification complete all as specified and directed.

Supply and fix factory made solid PVC moulded door shutter, 28 to 30mm thick (stiles), with 2, 6 or 6 raised panel design with 2mm thick moulded PVC sheet on the front face & 2mm plain colour PVC sheet on back face, supplying and fixing in the frame at site as per specication and drawings given in SSR Part-II complete all as specified and as directed.

Supply and fix 100mm long stainless steel butt hinges with galvanised mild steel hinge pin, anodised and fixed, type B-21 complete all as specified and as directed.

Supply and fix 150mm long extruded aluminium alloy handles, fabricated type, anodised complete all as specified and as directed.

Supply and fix 200mm long aluminium anodised, barrel tower bolts of extruded section and fixed complete all as specified and as directed.

Supply and fix Vitreous China Wash hand basin, white, flat back, size 550 mm x 400 mm size excluding taps, chain & plug & porcelain stopper including brackets, 40 mm dia PVC waste pipe, chromium plate coupling 32 mm dia & cutting for and pinning ends of brackets or erecting stand complete all as specified and directed.

Supply and fix 15 mm bore Pillar taps fancy type chromium plated with capastan heads screwed down heigh pressure with/without lettered 'Hot' or 'Cold' with long screwed shanks and fly nuts, screwed for iron pipe fixed complete all as specified and as directed.

Supply and fix PVC connection 15mm size with PTMT nuts of length 600mm complete all as specified & directed.

Supply and fix PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to wall of diameter 110mm complete all as specified and as directed.

Supply and fix PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor of diameter 110mm complete all as specified and as directed.

Supply and fix PVC(SWR) pipes single socketed in any length with rubber ring joints fixed to wall of diameter 75mm complete all as specified and as directed.

Supply and fix PVC(SWR) pipes single socketed in any length with rubber ring joints laid in trenches/floor of diameter 75mm complete all as specified and as directed.

Supply and fix 110mm PVC (SWR) plain bend with door any radius complete all as specified and as directed.

Supply and fix 75mm PVC (SWR) plain bend with door any radius complete all as specified and as directed.

Supply and fix 110mm bore PVC junction single `T' equal or unequal with access door complete all as specified and as directed.

Supply and fix PVC 100mm bore vent cowl complete all as specified and as directed.

Supply and Fix PVC valveless, syphonic action type, flushing cristern, low level, white, 10 ltr capacity with inlet, ball valve, float and handle including brackets, flush pipe complete all as specified and as directed.

Supply and fix mild steel bands , straps, hold fast and similar work conforming to Fe 290, Gde E-165 all as specified and directed.

Supply and Fix vitreous china wash down water closet Pedastal pattern light coloured (excluding flushing cistren ) including trap set, seat cover and conection to trap, flushing pipe, etc. with 'P' or 'S' trap, making good the floor to match with existing floor complete all as specified and as directed.

Supply and fix toilet paper holder, brass chromium plated complete all as specified and as directed.

Supply and fix 32mm dia low density polyethylene (LDPE) pipes of pressure rating 6 kgf/sqcm complete all as specified and as directed.

Supply and fix 75mm dia PVC (SWR) floor trap, plain with grating including jointing with solvent cement complete all as specified and as directed.

Supply and fix brass chromium plated tubular towel rail, 20mm dia, D type, 60cm long between flanges complete all as specified and as directed.

Material and Labour for applying oil based bitumen primer conforming to IS 3384-1986 at 0.20 kg/Sqm on prepared surface and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm and applying roof treatment with APP modified waterproofing membrane weighing not less than 3kg/sqm, reinforced with non woven polyster matt weighing not less than 160 gm/sqm having softening point not less than 140 degree centigrade, longitudinal tensile strength not less than 650N/Sqm cm, tearing strength of 180N(Minimum), applied by torch-on application including minimum 10 cm over lap and 15 cm end lap and applying of one coat of blown grade hot bitumen 85/25 conforming to IS 702 @ 1.20 kg / sqm over the membrane and then applying solar reflective bituminous aluminium paint for thermal insulation @ 0.10 kg/sqm complete all as specified and directed.

Supply and fix Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with chromium plated bracket guard and railing 60cm long complete all as specified and as directed.

Supply and fix liquid soap container of PTMT fixed with and including Chromium plated brass screws and wooden/plastic cleats(Minimum weight 105gms) complete all as specified and as directed.

Material and Labour for 40mm thick damp proof course using PCC 1:2:4 type B0 using 12.5mm graded stone aggregate including necessary formwork and using liquid water proofing compound all as specified. Note: Water proofing compound shall be measured separately.

Supply and laying Reinforced cement concrete hume pipes class NP2, laid and jointed complete with one collar per length of pipe, dia 150 mm complete all as specified and as directed.

Material and Labour for PCC 1:4:8, type D-2 using 40mm graded stone aggregate as in concrete bed to drain pipes including forming cradles complete all as specified and as directed.

Material and labour for 10mm thick rendering in CM 1:4 on fair faces of brick masonry/concrete , finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for providing cement concrete 1:2:4 type B1 using 20 mm graded stone aggregate cast in situ as in copings, bed plate, surface channels, benching and the like including weathering, slightly rounded or chamfered or chamfered angles as directed including use of form work as necessary all as specified and as directed.

Material and Labour for precast RCC 1:2:4 type B1 using 20mm graded stone aggregate as in cover slab and set in CM 1 : 4 including necessary form work complete all specified and as directed. NOTE: Reinforcement shall be measured and paid separately.

Material and labour for 75mm thick plain cement concrete 1:3:6 type C-2 using 40 mm graded stone aggregate as in sub base of floors including necessary form work all as specified and as directed.

Material and labour for machine pressed precast concrete interlocking paver block, any shape and size of 60 mm thickness M-35 grade with grey cement and pigment conforming to IS 15658-2006, laid over and including 50mm thick compacted thickness of crushed stone chipping not exceeding 6.3mm size, properly compacted using mechanical surface vibrator as cushioning to paver blocks complete all as specified and directed.

Material and labour for Plain cement concrete 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete including necessary form work all as specified and as directed.

Extra for forming fair finished drain or channel 30 cm inner girth in cement concrete using extra cement, incl forms, moulds, mitered/stopped etc all as specified and as directed.

Material and labour for 15mm thick rendering in CM 1:4 on fair faces of brick masonry/concrete , finished even and smooth without using extra cement complete all as specified and as directed.

Material and labour for preparation of old decorated external wall surfaces by washing with pressure pump, rubbing down and stopping of painted surfaces and applying one coat of weather proof acrylic emulsion exterior grade(anti fungal paint) premium quality, applied to surfaces of up to 4 storied buildings including necessary scaffoldings complete all as specified and as directed.

Taking down cement plastering on concrete or Brick works surface racking out joints, hacking for key , scrubbing down with water etc complete all as specified and as directed.

Material and Labour for preparation of plastered surfaces of wall and applying two coats of weather proof exterior emulsion paint over a coat of primer including necessary scaffolding complete all as specified and as directed. Make:Apex Ultima Protek of Asian/Exel of Nerolac/Weather Coat of Berger

Material and Labour for preparing of new surfaces of any description and applying two coats of acrylic distemper, white or tinted over a coat of primer on plastered wall surface complete all as specified and as directed.

Taking out and stripping old tarfelt over roofs, prapets walls including cement plastering and removing the rubbish n.exe 1.50 KM etc coplete including removing the debrish outside MD land complete all as specified and as directed.

Demolition of cement concrete (unreinforced) of any description and in any position not otherwise specifically provided for unreinforced complete all as specified and as directed.

Material and Labour for cutting out cracks to V section in existing roofs or terracing cleaning out, wetting, grouting, with cement and sand slurry 1:3 complete all as specified and as directed.

Demolition of brick work or stone/ boulder masonry, built in cement mortar including all quoins, pillars etc and removal from site complete all as directed.

Material and labour for Brick work with sub calass 'B' brick straight or curved on plan exc 6m mean radius and built in CM 1:6 complete all as specified and as directed.

Supply only integral water proofing compound complete all as specified and as directed.

Material and labour for 15mm thick rendering in CM 1:4 on faces of concrete/RCC slab, using water proofing compound @3% by weight of cement, finished even and smooth without using extra cement complete all as specified and as directed. Note: Water proofing compound shall be measured separately.

Supply and spread dry river sand in trenches for cable cushioning complete all as specified and directed. NOTE: Punned thickness shall be measured and paid.

Supply and Lay galvanised iron steel water tubing medium grade 25 mm bore with all necessary fittings, cutting thread, fixed to walls and ceilings or laid in floors all as specified and as directed.

Material and Labour for cutting existing GI pipe tubing for alteration or additions of 25mm bore pipes and inserting new connection with and including necessary Tee of 25mm or reducer to connect to new pipe line and cutting, jointing and testing complete all as specified and as directed.

Supply and fix Gun-metal, globe or gate valves,with iron wheelhead, screwedboth ends for iron pipe and fixed 25mm bore complete all as specified and as directed.

Supply and lay burnt bricks sub class 'B' for protection of cable laid perpenticular to axis of cable complete all as specified and as directed.

Supply and fix LT under ground cable 1100 volts grade PVC /XLPE sheathed armoured multistranded heavy duty electric cable with aluminium conductor 2 core 10Sqmm, laid in trenches/ duct / walls including cable gland on both termination where necessary including laying, connecting to various switches in panel board, testing and commissioning etc complete all as specified and directed. NOTE: Earth work excavation shall be measured and paid separately.

Supply and Fix 40 mm dia galvanized iron tube light grade for cable protection, supporting to poles, plinth protections, road crossing, trenches, footpath etc including clamps, nut, bolt and washers etc. complete all as specified and as directed.

Schedule of Credit (Minus) Rs. 2850.00 NOTE: Bidder shall insert credit amount of Rs. 2850.00 as rate in Green field under Col-13.

Anaswara Constructions

KDR CONSTRUCTION

VIJAY CONSTRUCTIONS

LAKSHMI BUILDERS

NARAYANA CONSTRUCTIONS