Construction of New Prathmik Pashu Sarvar Kendra at Village Duma Ta. Jambughoda Dist. Panchmahal

Name of Work :- Construction of New Prathmik Pashu Sarvar Kendra at

Village Duma Ta. Jambughoda Dist. Panchmahal

BILL OF QUANTITIES

Memorandum showing item of works to be carried out.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Civil works items

1 Excavation for foundation upto 1.50 mt depth including sorting out and stacking 677.75 Cum 229.22

of useful materials and disposing the excavated stuff for all lead and lift for all

2 Excavation for foundation from 1.50 mt to 3.00 mt. depth including sorting out 366.29 Cum 235.20

and stacking of useful materials and disposing the excavated stuff with all lead

and lift for all sorts of soil.

3 Providing and laying cement concrete work 1:2:4 (1- Cement : 2- Coarse sand : 131.23 Cum 4109.08

4 graded stone aggregates 20 mm nominal size) and curing complete excluding

cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base or columns and mass concrete.

4 Providing and laying controlled cement concrete M-250 and finishing smooth 98.03 Cum 4759.32

with curing etc complete, including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Foundations, footings base of columns & mass

5 Providing and laying controlled cement concrete M-250 and curing complete 29.25 Cum 8222.13

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Columns, pillars, posts & struts upto floor two level

6 Providing and laying controlled cement concrete M-250 and finishing smooth 47.76 Cum 5746.90

with curing etc. complete including the cost of formwork but excluding the cost of

reinforcement for R.C.C. work in Plinth beams.

7 Filling available excavated earth (excluding rock) in trenches plinth side of 1424.92 Cum 130.39

foundation etc. in layer not exceeding 20 cm in depth consolidation each

deposited layer by ramming and watering etc. complete.

8 Filling in foundation and plinth with murrum or selected soil in layers of 20 cm 90.13 Cum 273.96

thickness including watering, ramming and consolidating etc. complete.

9 Filling in plinth with sand under floors including watering, ramming, consolidating 19.43 Cum 460.19

and dressing complete.

10 Anti-Termite System : Providing and laying of permanent piping technology anti- 238.46 Sq.m. 134.33

termite treatment before flooring work by installing LLDP (Low linear density

polyethylene) tube of 8 mm O.D. & 6.4 mm 1.D. with inbuilt pressure

compensation chip every 30 cm interval in the tube, having working pressure of

2 Kg/cm2 and release rate of 1.9 Itr/hour fixed by P-clips and nails. The LLDP

pipe shall be installed at the entire periphery of the building and at internal

network of building at a depth of 20 to 200 mm under floor at every 2 to 3 mtr.

c/c distance (adjusted as per building layout) & ends of loop pass through a PVC

elbow of minimum 32 mm ID at junction box of wall and floor level, entering into

a steel reinforced grooved flexible pipe of minimum 22 mm ID leading into

junction box and the loops shall terminate in junction boxes & test every junction

during injecting chemicals for termite control treatment.

The anti termite chemical Imidacloprid 30.5% SC mix as per IS-6313 (part III)

shall be injected by the pressure pump diluted with water @ 10.5 ml/5 ltr of

water at the rate of 2 Kg/sq.cm @ 5 Ltr/SMT. The contractor shall submit

approved line plan for piping system and junction boxes dully approved by

Engineer-in-charge with bond of 5 year warranty. (i) Permanent pipe system with

junction boxes (Only pipe network)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

11 Providing and laying damp proof course 25mm thick cement concrete 1:2:4 (1- 37.91 Sq.m. 306.64

cement : 2 coarse sand : 4 stone aggregate 10 mm nominal size) and curing

12 Providing and laying brick work using common burnt clay building conventional 39.17 Cum 4021.02

type bricks having crushing strength not less than 35 Kg./Sq.cm. in super

structure above plinth level and up to floor two level in cement mortar 1:6 (1

cement : 6 fine sand) including the cost of all materials and labour charges etc.

13 Providing and laying brick work using common burnt clay building conventional 79.13 Cum 4289.33

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

Ground Floor including the cost of all materials and labour charges etc.

14 Providing and laying brick work using common burnt clay building conventional 7.28 Cum 4329.52

type bricks having crushing strength not less than 35 Kg/sq.cm. in super

structure above floor two level in cement mortar 1:6 (1 cement : 6 fine sand) for

First Floor including the cost of all materials and labour charges etc. complete.

15 Providing and laying half brick work using common burnt clay building 43.09 Sq.m. 651.67

conventional type bricks having crushing strength not less than 35 Kg/Sq.cm in

cement mortar 1:4 (1 cement : 4 coarse sand) in super structure above plinth

level upto floor two level for Ground floor including the cost of all materials and

labour charges etc. complete.

16 Providing and laying cement concrete 1:3:6 (1- Cement : 3- Coarse sand : 6 14.52 Cum 3925.77

crushed stone aggregates 20 mm nominal size) and curing complete including

cost of formwork in (A) Wall Caps / Coping

17 Providing and laying controlled cement concrete M-200 and curing etc. complete 2.65 Cum 7088.18

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel -chhaja, beams, girders and cantilever

up floor to level.

18 Providing and laying controlled cement concrete M-200 and curing etc. complete 0.05 Cum 7127.29

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level.

19 Providing and laying controlled cement concrete M-200 and curing etc. complete 1.10 Cum 6546.82

including the cost of form work but excluding the cost of reinforcement in (C)

Slabs landings shelves balconies, lintel-chhaja, beams, girders and cantilever up

floor to level (Ground floor).

20 Providing and laying controlled cement concrete work of M-200 and curing 2.10 Cum 8107.27

complete including cost of formwork and excluding reinforcement for reinforced

concrete work in (E) Staircases excluding landing upto floor two level for

staircase in below give fair finish surface.

21 Providing and laying controlled cement concrete M-200 and curing complete 16.88 Cum 7523.49

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, pillars posts and struts, upto floor two

level for Ground floor.

22 Providing and laying controlled cement concrete M-200 and curing complete 4.92 Cum 7562.60

including the cost of formwork but excluding the cost of reinforcement for

reinforced concrete work in (D) Columns, pillars posts and struts, upto floor two

level for Ground floor.

23 Providing and laying controlled cement concrete M-200 & curing complete 31.10 Cum 6216.55

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for G.F.

24 Providing and laying controlled cement concrete M-200 & curing complete 1.98 Cum 6255.66

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Beam upto floor two level for G.F.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

25 Providing and laying controlled cement concrete M-200 & curing complete 37.62 Cum 4612.67

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

G.F. slab for Grade slab.

26 Providing and laying controlled cement concrete M-200 & curing complete 40.63 Cum 6309.47

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

27 Providing and laying controlled cement concrete M-200 & curing complete 2.88 Cum 6348.58

including the cost of form work but excluding the cost of reinforcement for

reinforced concrete work in Slabs, landing, cantilevers upto floor two level for

28 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 36109.79 Kg. 76.21

including bending, binding and placing in position complete upto all floor level.

29 Providing I.S.I. Mark T.M.T. bar Fe-500D reinforcement for R.C.C. work 1917.80 Kg. 77.21

including bending, binding and placing in position complete upto floor two level.

Extra for additional lift of reinforcing steel for all R.C.C. work above floor two

30 Providing and fixing M.S. Fan clamps type 1 to 16mm dia M.S. bar bent to shape 14.00 No. 132.20

with hooked ends to R.C.C. slabs curing, laying including painting the exposed

portion of loops, all as per standard design complete

31 Providing & fixing 40 mm thick Single shutter flush door solid core finished with 18.00 Sq.m. 6972.03

both side 1 mm thick lamination both side like 'NOVAPAN 'or equivalent of

natural wood grain shade as approved by this office having telephone black

granite 18 mm thick frame with double stone as per the instruction of Engineer in

charge with necessary SS hinges and fixtures etc. complete.

32 Providing & fixing 35 mm thick Single shutter flush door solid core finished with 4.73 Sq.m. 6606.41

both side 1 mm thick laminationboth side like 'NOVAPAN 'or equivalent, of

natural wood grain shade as approved by this office having telephone black

granite 18 mm thick frame with double stone including fixed ventilation above

lintel level as per drawing and as per the instruction of Engineer in charge with

necessary SS hinges and fixtures etc. complete.

33 Providing and fixing window having extruded aluminum colour anodized section 33.62 Sq.m. 4259.17

frame main outer size 95mm x 24mm x 1.17mm (@ Wt. 0.738 Kg/mt), horizontal

three track member size 92mm x 31.75mm x 1.30mm (@ Wt. 1.07 Kg/mt),

vertical member of size 92mm 31.75mm x 1.50mm (@ Wt. 1.06 Kg/mt) with

sliding shutters of horizontal member size 40mm x 18mm x 1.29mm (@ Wt. of

0.456 Kg/mt), vertical member of size 40mm x 18mm x 1.29 mm (@ Wt. of

0.456 kg / mt) with 5 mm thick transparent bronze colour tinted float glass with

powder coated aluminum fittings and fixtures and transparent silicon sealant

glass fixing including granite frame as per details etc. complete.

34 Providing and fixing louvered type ventilators with powder coated aluminum 2.70 Sq.m. 13732.97

fittings and fixtures and Blur glass fixing to adjustable louvers and black granite

frame as per details and executed as per directed by Engineer in charge.

35 Providing and fixing M.S. hollow section box grills of required pattern to frames 165.47 Kg. 222.20

of windows or opening etc. with M.S. section of 2.5" x 2.5" square of Tata of

jindal section having finish with G.I. coated finish by zinc oxide and oil paint

including all labour and material as per directed by engineer incharge.

36 Providing and fixing M.S. grills of required pattern to wooden / Marble / Granite / 682.39 Kg. 127.26

Stone frames of windows etc. with M.S. flats at required spacings and frame

alround, square or round bars with round headed bolts and nuts or by screws (A)

Ornamental Grill.

37 Providing and laying Vitrified tiles 8 to 10 mm thick, 36'' x 36'' in flooring treads of 165.42 Sq.m. 1484.61

steps and landing laid on a bed of 12mm thick cement mortar 1:3 (1-cement : 3-

coarse sand) finishing with flush pointing in white cement. Light shade

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

38 Providing and laying 24" x 24" vitrified 8 mm thick tiles flooring over 20mm 7.27 Sq.m. 1397.83

(average) base of cement mortar 1:6 (1 cement : 6 coarse sand) on new surface

or fixing on existing flooring by adhesive material including dismentaling of

existing flooring and jointed with color cement slurry including finished with flush

pointing & cleaning the surface etc. complete for anti skid.

39 Providing and laying Marbo Granite tiles 8 to 10 mm thick, 24'' x 24'' in skirting, 92.77 Sq.m. 1141.45

risers of steps and dedo on 10mm thick cement plaster 1:3 (1 cement : 3 coarse

sand) and jointed with white cement slurry.

40 Providing and laying polished Kota stone slab flooring over 20mm (average) 22.88 Sq.m. 976.72

thick base of cement mortar 1:6 (1-cement : 6 coarse sand) or L.M. 1.1.5 (1-

Lime putty :1.5 - coarse sand) laid over and jointed with grey cement slurry

mixed with pigment to match the shade of slab including rubbing and polishing

etc. complete. (A) 25mm thick

41 Providing and laying 18 mm thick machine cut, free edges, machine polished 34.78 Sq.m. 3325.93

Black Granite tread and risers in single piece with 1 cm nosing and necessary

grooves on treads etc. complete.

42 Providing and laying broken china mosaic flooring for terrace using 12 mm to 20 260.49 Sq.m. 747.29

mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain or

slope and to be tempered to bring mortar creme out upto surface using white

cement including rounding off junctions and extending them upto 15 cm along

the wall, clearing with water and oxalic acid etc. as directed.

43 Providing and laying BBCC of 75mm thick layer in CM (1:3) including spraying 247.13 Sq.m. 615.09

two coat of water proofing chemical with selected brand by enginner in charge

i.e. perma or other with leveling complete for ready base of china mosaic

44 Providing and cement vata (10cm x 10cm size) quarter round in cement mortar 158.15 Rmt. 23.68

1:1 including neat cement finishing watering etc. complete.

45 Providing 15mm thick cement plaster in single coat on rough (similar) side of 582.11 Sq.m. 167.03

single or half brick walls for interior plastering upto floor two level and finished

even and smooth in cement mortar 1:4 (1 cement : 4 sand) including galvanised

iron chicken mesh complete.

46 Providing 15mm thick cement plaster in single coat on brick/concrete walls for 246.59 Sq.m. 191.85

interior plastering upto floor two level and finished even and smooth in cement

mortar 1:4 (1-cement : 4 sand) for ceiling.

47 Providing 20mm thick sand faced cement plaster on walls upto height 10 604.18 Sq.m. 356.40

metres above ground level consisting of 12mm thick backing coat of C.M. 1:3 (1-

cement : 3-sand) and 8mm thick finishing coat of C.M. 1:1 (1-cement : 1-sand)

48 Providing throating or plaster drip and moulding to R.C.C. Chhajja. 48.25 Rmt. 41.00

49 Applying two coats of putty & two coats of primer of approved brand and 521.80 Sq.m. 40.59

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth.

50 Applying two coats of putty & two coats of primer of approved brand and 246.59 Sq.m. 42.67

manufacture on new wall surface to give an even shade including thoroughly

brushing the surface free from mortar dropping and other foreign matter and

sand papered smooth. (Ceiling Putty)

51 Wall painting two coats with plastic emulsion paint of approved brand and 521.80 Sq.m. 78.90

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth.

52 Finishing wall with weather proof exterior emulsion paint on wall surface (two 1246.15 Sq.m. 114.53

coats) to give an required shape even shade after thoroughly brushing surface

to remove all dirt, dust and remains of loose powdered materials etc. complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

53 Wall painting two coats with plastic emulsion paint of approved brand and 246.59 Sq.m. 80.98

manufacture on wall surfaces to give an even shade including throughly

brushing the surface free from mortar droppings and other foreign matter and

sand papered smooth on ceiling.

54 Providing, laying and jointing in true line and level I.S.I. mark 40mm dia. U.P.V.C 36.00 Rmt. 148.12

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

55 Providing, laying and jointing in true line and level I.S.I. mark 32mm dia. U.P.V.C 57.60 Rmt. 119.15

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

56 Providing, laying and jointing in true line and level I.S.I. mark 15mm dia. U.P.V.C 18.00 Rmt. 72.65

pipe (Sch-40) for cold water including fitting as approved by Engineer in charge.

Pipe shall be fixed on the wall with held of clamp at every two meter c/c or shall

be concealed as directed including necessary fitting etc. including testing of pipe

and joints and fixing the same with adhesive solvent including cost of all

57 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 13.50 Rmt. 653.77

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (F) 50 mm dia.

58 Providing and fixing concealed center point to wall, ceiling and floor I.S.I. mark 15.00 Rmt. 249.72

C.P.V.C. (SDR 13.5) PIPE having National Sanitation Foundation (NSF) seal for

potable water of following dia. nominal bore tube fittings and clamps including

making good the wall, ceiling and floor etc. complete. (B) 25 mm dia.

59 Providing, laying and jointing in true line and level I.S.I. mark 110mm diameter 79.00 Rmt. 835.15

U.P.V.C. SWR Type B pipe confirming to IS 13592 -1992 with one end plain and

other end socketed with rubbering & fitting confirming to ISI 14735-1999 of

approved make for drainage system pipe line, pipe shall be jointed with each

other with rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the

size 110mm diameter x 149mm length x 145mm high at every 2000mm center

to center or shall be concealed in wall as directed including necessary fitting

such as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

60 Providing and fixing screw down bib taps of following size (A) Brass chromium 14.00 No. 186.83

plated screw down bib tap (i) 15mm dia. as approved by Engineer in charge for

61 Providing and fixing screw down bib taps of following size (A) Brass screw down 6.00 No. 214.81

bib tap polished bright (ii) 20mm dia. as approved by Engineer in charge for all

62 Providing and fixing pillar tap, capstan head screw down high pressure with 7.00 No. 354.69

screw, shanks and back nuts (B) 20mm dia. as directed by Engineer in charge.

63 Providing and fixing chromium plated brass half turn flush cock of approved 7.00 No. 263.77

quality including fixing in pipe line etc. complete. (ii) 25mm dia. as directed by

Engineer in charge.

64 Providing and fixing Gun metal check or non return full way wheel valve. 40 mm 3.00 No. 663.43

65 Providing and fixing Gun metal check or non return full way wheel valve. (C) 25 4.00 No. 420.63

66 Providing and fixing Kitchen sink with C.I. or M.S. brackets, painted white 1.00 No. 2280.27

including cutting holes in walls and making good the same but excluding fittings.

(C) Vitreous China Sink (i) 600mm x 450mm x 150mm size.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

67 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 3.00 No. 1382.37

brackets painted white including cutting holes and making good the same but

excluding fittings. (A) Vitreous china (ii) Flat Back washbasin 550 mm x 400mm

size. (i) In white colour.

68 Providing and fixing C.P. brass towel rail complete with C.P. brass brackets fixed 4.00 No. 603.19

to wooden plugs with C.P. brass screws.(B) 600 mm x 20 mm size.

69 Providing and fixing C.P. brass shower rose with 15mm or 20mm inlet.(A) 2.00 No. 282.16

100mm dia. each

70 Providing and fixing 600mm x 450mm bevelled edge mirror of superior glass 3.00 No. 833.73

mounted on 6mm thick A.C. sheet or plywood sheet and fixing to wooden plug

with C.P. brass screws and washers.

71 Providing and laying wash down water closet (European type Wall hung W.C. 3.00 No. 10261.60

pan) Florentine series FLS-WHT 0111B including providing and fixing metropole

flush cock seat cover, jet wash etc. complete unit of jaquar branch (or

equivalent) including installing and fitting as per manufacturers standards by

skilled trained plumber including testing etc. complete quality and brand as

approved by Engineer in charge.

72 Providing, laying and jointing in true line and level I.S.I. mark 160mm diameter 37.00 Rmt. 831.22

U.P.V.C. (Type B) confirming to IS 13592 -1992 with one end plain and other

end socketed with rubbering & fitting confirming to ISI 14735-1999 of approved

make for drainage system pipe line, pipe shall be jointed with each other with

rubber lubricant, pipe shall be fixed on wall using of PVC clamp of the size

160mm diameter x 210mm length x 196mm high at every 2000mm center to

center or shall be concealed in wall as directed including necessary fitting such

as bends, shoes etc. including testing of pipe and joints and jointed with

adhesive solvent cement including cost of all materials.

73 Providing and fixing PVC SWR Nahni Trap IS 14735 for drain with jail of the 9.00 No. 558.36

following nominal diameter of self cleansing design with C.I. screwed down of

hinged grating including the cost of cutting and making good the walls. (i)

74 Providing and fixing S.W.gully trap with C.I. grating brick masonary chamber and 4.00 No. 1292.19

water tight C.I. cover with frame of 300mm x 300 mm size (inside) with standard

weight (i) square mouth traps (A) 100 mm x 100 mm size P type.

75 Providing and laying (two level or slopes) and jointing with stiff mixture of cement 15.00 Rmt. 305.13

mortar in proportion 1:1 salt glazed stone ware pipes following nominal internal

diametre including testing of pipes and joints etc. complete. 150 mm dia.

76 Constructing brick masonary chamber for under ground C.I. Inspection chamber 6.00 No. 2932.93

and bends with bricks having crushing strength not less than 35 Kg/cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455 mm x 610 mm. internal dimensions,

total weight of cover with frame to be not less than 38 Kgs. weight of cover

Kg. and wt. of frame 15 Kg) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse

sand : 4 graded stone aggregate 20 mm. size) foundation concrete 1:5:10 inside

plaster 15 mm. thick with cement mortar 1:3 finished smooth with a floating coat

of neat cement on walls & a bed concrete etc. complete. (i) inside dimension

455mm x 610 mm and 450mm deep for single pipe line.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

77 Constructing Manhole with R.C.C. top slab in 1:2:4 mix (1-cement :2-coarse 1.00 No. 11029.97

sand : 4-graded stone aggregate 20mm nominal size) foundation concrete 1:3:6

mix (1-cement : 3- coarse sand :6-Brick bats 40 + 50mm size) inside plastering

15mm thick with Cement Mortar 1:5 (1-Cement : 5-coarse sand) finished with a

floating coat of neat cement and making channels in cement concrete 1:2:4 mix

(1-Cement : 2-Coarse sand :4-stone aggregate 20mm nominal size) finished

smooth complete including curing and festing (i) Inside size 900mm x 1200mm

and 1.5M. deep including C.I. cover with frame size 560mm diameter total

weight of cover and frame to be not less than 128 kgs. (Wt. of cover 64 Kg. and

Wt. of frame 64 Kg.) (A) With 230mm thick walls of brick masonry using brick

having crushing strength not less than 35Kg. / Sq.cm. in Cement Mortar 1:5 (1-

Cement : 5 Coarse sand) (1) A type depth 0.90 Metre for 150mm diameter

78 Providing erecting and fixing double coated Syntex or equivalent PVC (I.S.I.) 3000.00 Litre 3.95

mark water tank of required capacity each with all necessary fittings &

connection etc. comp on terrace.

79 Providing and fixing ball cock of approved quality as directed. (A) Copper metal 2.00 No. 132.89

80 Providing and fixing 90 cm high Stainless steel railing made from anticorrosive 3.20 Rmt. 3162.31

S.S. pipe of 50 mm dia (16 Gauge) as hand rail with S.S. 38 mm dia. (16

Gauge) as a vertical support fixed in RCC slab at 1.2m c/c including three

horizontal S.S. pipes of 25 mm dia. (16 gauge) at equal distance fixed by

mm dia (16 gauge) S.S. pipe including accessories as per detailed drawing as

directed etc. complete.

81 Painting lines, dashes, arrows, letters etc on roads, air fields,on walls and like in 14.40 Sq.m. 123.13

two coats with road marking paint, brushing including cleaning the surface of all

dirt, dust and other foreign matter. (i) Upto 10cm in width.

82 Providing and laying sandwich type kitchen platform of size 2.10 x 0.76 x 0.76 m 3.01 Sq.m. 16882.15

and respected length with dhar polish or moulding having base 4" and support &

base with marble or kota as per site requirement also loft and base finish with

glaze tile and top with selected shed of marble or granite with gas pipe provision

and sink including all fittings, material and labour as per directed by Engineer

83 Clearing and grubbing road land including uprooting rank vegetation grass 0.25 Hect. 80243.79

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (A) By manual means in

area of light jungle.

84 Providing & fixing Co2 type portable ABC Dry Powder type ABS Fire extinguisher 15.00 No. 3500.00

capacity 4.5 Kg. discharge range 3mt. timing 60 to 180 sec. standard approved

IS code No. 2878:2004.

85 Supplying and Installation of Solar Plant of 3.3 kv with supportive structure as 1.00 No. 214170.00

per instructed by Engineer in charge.

86 Providing and fixing M.S. grill entrance gate of predetermine design including all 11.34 Sq.m. 4332.70

material like hinges, roller, stopper, rail head, handle etc having coat of red lead

and painting with selected colour guide by engineer incharge.

87 Providing and fixing precast Rubber dye / steel dye inter locking concrete block 366.51 Sq.m. 686.90

60mm thick with grade of concrete M-300 pneumatic compressed / vibrated

mechanically and as per approved design confirming to IS 15658 :

including 35 mm sand layer for levelling and filling the joint with sand in proper

line and level as per guidelines of IRC : SP 63-2018 etc. complete.

88 Providing and fixing precast concrete kerb stone of grey cement based concrete 53.90 Rmt. 383.38

block 30 cm length, 30 cm height and 15 cm thick of M-200 grade concrete as

per approved design and including excavation for fixing in proper line and level,

filling the joints with C.M. 1:3 (1 cement : 3 fine sand) etc. complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

89 Drilling of 215mm dia. bore in over burden strata (0-30) including lowering and 75.00 Mtr 300.00

fixing of 175 mm nominal dia UPVC pipe/175 mm dia ERW pipe upto required

depth and further drilling of 165mm dia bore hole in rocky strata by DTH rig.

90 Providing & supplying 175mm nominal dia. UPVC “CS” type pipe as per 30.00 Mtr 906.00

IS:12818 and as per detailed technical specification.

91 Electric motor driven borewell submersible pump set conforming to I.S. 8034 1.00 Set 18756.00

and motor conforms to IS-9283 working at 3 phase 400/440 volt 50 C/S A.C.

supply & 2900 R.P.M. discharge 240 LPM and 72 mtr Head, 7.5 hp Cat.

92 SITC of D.O.L starter up to 7.5 H.P. 1.00 Set 8383.00

93 Providing & supplying Flat PVC cable size 4.0 sq.mm as per IS 694 with BIS 60.00 Mtr 87.00

mark and as per detailed technical specification.

94 Heavy duty, 50 mm dia. G.I. Column pipe both end threaded having length 60.00 Mtr 537.00

approximate 3 mtr. confirming to IS 1239 (Part-1) with coupling at one end.

95 Providing, supplying and fitting ISI mark CI D/F Sluice Valves as per IS:14846 1.00 No. 2316.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. PN-1 With hand

wheel /cap operated (PD type short body) 50 mm

96 Providing, supplying & fitting ISI mark CI D/F Reflux Valves as per IS:5312 1.00 No. 3307.00

(Latest Edition) of following class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection charges, loading, unloading,

conveyance to departmental stores, stacking etc. complete. Reflux valves PN

1.0 IS 5312 with ISI mark 50 mm

97 Lowering of Submersible motor pump set complete with required nos and size of 1.00 Job 2500.00

Column pipe erected by means of proper chain pulley block & pipe wrenches

after checking of threads of each pipe with coupling to take the load of the

pumpset and pipe assembly filled up with water with trail testing..

98 Clamps made from MS plate with 3 holes on either side with nuts & bolts of 1.00 No. 560.70

standard make and suitable size 450 mm x 65 mm x 10 mm flat suitable to

99 Supply of TOP & BOTTOM accessories of 50 mm dia. 1.00 No. 1475.00

100 R&B Approved make ELCBs / RCCBs conforming to IS:12640 and having 1.00 No. 2213.00

sensitivity of 30 mA and Short Circuit with stand capacity of 10 KA and suitable

for operation on 3 phase and neutral 415V. having characteristic of quick action

& tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed. 40 Amp. Cat.III

101 Electrical wiring & fitting charges of electric meter, 40Amp fuse, control panel 1.00 Job 2500.00

etc. including erection of the above items on wooden board, cost of material and

all liasioning work for getting electric connection from concerned Vij Company.

102 Pumping test of the tubewell by sub mersible pump of adequate capacity for 165 1.00 Job 17250.00

103 Providing and fitting readymade prefabricated portable chemicalized ferro 1.00 Job 12187.50

concrete mini panel having outer size 110 x 50 x 190 cm with necessary fitting

for electic panel mounting complete as per detailed specification and drawing.

104 Three Phase GEB power charges. 1.00 Job 14000.00

105 Providing and fixing precast concrete kerb stone of grey cement based concrete 102.00 Rmt. 361.64

block 30 cm length, 30 cm height and 15 cm thick of M-250 grade concrete as

per approved design and including excavation for fixing in proper line and level,

filling the joints with C.M. 1:3 (1 cement : 3 fine sand) etc. complete.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

106 Grassing with 'Doobs' Grass (Grassing with 'Doobs' grass including watering and 303.00 Sq.m. 28.89

maintenance of the lawn for 30 days or more till the grass forms a thick lawn

free from weeds and fit for moving including supplying good earth if needed) (ii)

In rows 7.5 cm apart in either direction.

107 Maintenance of lawns with Fine Grassing for the First Year. 303.00 Sq.m. 190.39

108 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 3660.76

and bends with bricks having crushing strength not less than 35Kg./cm2 in C.M.

1:5 C.I. cover with frame (Light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1-cement :2- coarse sand :4-

graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete.(ii) Inside dimensions 500mm x

700 mm and 450mm deep for pipe line with one or two inlets.

109 Providing and laying C.I. steps 50cm x 15cm. 2.25cm. and Ci cover suitable 2.00 No. 6303.41

frame with necessary fixtures and joint and finish complete. (Including sump step

in staggered form including two coat of oil paint)

110 Providing 20 mm thick double coat mala plaster on interior brick/ concrete work 77.00 Sq.m. 270.43

for plastering comprising of base coat of 12 mm thick cement plaster in cement

mortar 1:4 (1 cement : 4 sand) in rough finishing and 8 mm thick top coat of

cement mortar 1:2 finished with trowel including scaffolding and curing for

111 Providing and fixing of submersible motor of required quality and with control 2.00 No. 9595.00

panel of 1.00 HP etc complete with having outlet 25 mm dia.

112 Providing & fixing to wall, ceiling and floor galvanized mild steel tubes (medium 30.00 Rmt. 602.70

grade) of the following nominal bore, tube fittings and clamps including making

good the wall, ceiling and floor (E) 40mm.

113 Providing and laying cement concrete 1:5:10 (1-Cement : 5 fine sand :10 graded 36.00 Rmt. 213.71

stone aggregate 40mm nominal size) bedding for stoneware pipes of following

internal diameters with necessary formwork and curing complete.(B) 150mm dia.

(166mm avg. bed thickness)

114 Extra over item 24.1 for providing salt glazed stoneware fittings. (i) Bends of 10.00 No. 63.79

required degree (any radious) of following nominal diameters. (B) 150mm dia.

115 Providing and laying marble chips skirting (Terrazo) or dedo rubbed, and 81.54 Sq.m. 621.99

polished to Granolithic finish top layer 6mm thick with white, black or white and

black marble chips of size from smallest to 4mm nominal size laid in cement

marble powder mix 3:1 (3- cement : 1 marble powder by weight) in proportion of

4:7 (4-cement marble powder mix : 7-marble chips by volume) 20mm thick with

under layer 14mm thick cement plaster 1:3 (1-cement : 3-coarse sand) (A) Dark

shade pigment with ordinary cement (In top layer only)

116 Excavation for foundation for depth from 3.0 m to 5.0 m including sorting out and 15.40 Cum 174.23

stacking of useful materials and disposing off the excavated stuff upto 50 Meter

lead (B) Dense or Hard soil.

117 Providing and laying controlled cement concrete M-150 for curing complete 3.10 Cum 3784.60

excluding cost of formwork and reinforcement for reinforced concrete work in (A)

Foundations, footings, base of columns and mass concrete.

118 Double half brick thick honey comb brick work with common burnt clay building 69.04 Sq.m. 307.58

bricks having crushing strength not less than 35 Kg/Sq.cm. (i) In cement mortar

1:4 (1 cement : 4 coarse sand)

119 Providing and fixing C.I. Manhole cover 0.60 M. x 0.45M. size having weight not 2.00 No. 958.17

less than 35 Kg.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

120 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 49.00 Rmt. 248.67

non-pressure pipes I.S. class NP-2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (B)

121 Constructing brick masonry chamber for underground C.I. Inspection chamber 2.00 No. 7180.44

and bends with bricks having crushing strength not less than 35 Kg/Cm2 in C.M.

1:5 C.I. cover with frame (light duty) 455mm x 610mm internal dimensions total

weight of cover with frame to be not less than 38Kg. (Wt. of cover 23 Kg.) and

Wt. of frame 15Kg.) (R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand :

4 graded stone aggregate 20mm size) foundation concrete 1:5:10 inside plaster

15mm thick with cement mortar 1:3 finished smooth with a floating coat of neat

cement on walls and bed concrete etc. complete. (iii) Inside dimensions 600mm

x 850 mm and 450mm deep for pipe lines with three or more inlets.

122 Providing, laying (to level or slopes) and jointing reinforced concrete light duty 30.00 Rmt. 348.04

non-pressure pipes I.S. class NP2 of the following internal diameter with collars

and butt ends prepared for collar joints including testing of joints complete. (C)

123 Filling in foundation and plinth with brick bats, chhara in layers of 20cm. 6.20 Cum 600.56

thickness including watering, ramming and consolidating etc. complete.

124 Providing and fixing PVC SWR Nahni trap IS-14735 for drain - 75 mm diameter 10.00 No. 547.22

with jali of the following nominal diameter of self cleansing design with C.I

screwed down or hinged grating including the cost of cutting and making good

125 Providing, fixing and erecting steel shed including M.S. G.I. pipe (class-B), 68.79 Sq.m. 3870.32

framing of structure with hollow section and painting with two coats of oil paint

including priming coat. Rates including with necessary fabrication work including

cutting, welding, making holes by drilling machine & fixing in line and level of all

structure including cost of all laboures, fixtures, fastening and equipments etc.

126 Office Table :- 18mm thick three layer pre laminated particle board Work with 4.00 No. 23000.00

PVC edge band 2mm thick wrapped around the top, decorative aluminium

bidding in top and modesty including all necessary elements with necessary

features and fastning finish all as per directed by Engineer in charge. 6 FT Office

Table (Dimension :- 180 cm x 90cm x 75 cm) with suitable brand.

127 Revolving Chair :- Full-Back Executive Office Chair upholstered in bonded 4.00 No. 14750.00

leather and PVC, Padded seat and back for all-day comfort and support,

Pneumatic seat-height adjustment; 360-degree swivel; smooth-rolling casters

and having overall dimension 73.9D x 66.5W x 115.6H centimeters with Armrest

(Brown) with selected brand.

128 File Rack :- lack adjustable 5-Shelf Shelving Unit Storage Rack Utility Rack 10.00 No. 7700.00

Garage Shelves Display Rack Steel Boltless Rivet Rack, 60 inches Height 1-

Pack ({5 - SECTION } 5'[H] x 2'[L] x 1'[D]) with suitable brand.

129 Visiting Bench :- Chair Three Seater Waiting Area Chair Reception Chair 325- 5.00 No. 10700.00

350 Kg Weight Handling Capacity. Durable Parts and support, Our Chairs have

whole welded connections.

Product dimensions: Length (70 inches), Width (23 inches), Height (31 inches)

Color : Shining Silver, Material : Mild Steel (Iron), Finish: Chrome Finish, Style:

130 Steel Stool :- Office Stainless Steel Stool having minimum overall dimension 10.00 No. 1800.00

35.6D x 35.6W x 76.2H Centimeters, made with S.S. leg and rubber pad /

bushing with suitable brand which will select by engineer in charge.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

131 Chair :- S.S. Chair for Office having seat and back with selected cushion, Fabric, 20.00 No. 2600.00

Pattern, PU with arm rest and minimum overall dimension 78.7D x 41.9W x

78.7H Centimeters with suitable brand which will select by engineer in charge.

132 Stainless Steel Office Almirah : Supply and installing Portable Modern double 10.00 No. 15000.00

Door steel almariah with nearer 30 kg wt having dimension 36 x 18 x 78.5 inch

made from SS, Eco friendly and UV resistant in grey color having minimum

partition for file rack and other department as per selected and directed by

Engineer incharge.

133 Providing, supplying and fixing the AC of 1.5 tonne of standard company i.e. 3.00 No. 45000.00

Blue star, Panasonic or equivalent as per manufacturer specification and select

by Engineer incharge

134 Providing and laying burnt brick masonary for super structure with ordinary 55.20 Cum 4320.08

portland cement mortar 1:5 proportion including providing scaffolding racking out

joints curing etc. complete for all leads and lifts. (Conventional Bricks) upto floor

135 Providing 20 mm thick sand faced cement plaster with Gutka on walls upto 639.53 Sq.m. 329.29

height 10 meters above ground level consisting of 12mm thick backing coat of

C.M. 1:3 (1 cement : 3 sand) and 8mm thick finishing coat of C.M. 1:1 (1cement

:1 sand) etc. complete including painting with two coats of water proof acrylic

emulsion paint to give an even shade.

136 Providing and laying and fixing 50 mm thick expansion joint by hydro cell semi 13.85 Sq.m. 1491.03

rigid UV resistance with high performance laminated closed cell polythene foam

joint filler in sheet foam as directed etc. complete.

137 Providing and fixing Barbed wire for Y shape fencing on existing coping / wall, 156.00 Rmt. 1177.66

Fencing made of galvanized steel wire of including all material like angle post

fixing in wall/coping of a size ISA 45 x 45 x 4 mm (1.5m C/C) with 150 x 150 x

mm base plate and anchor bolts M-12 - 4 nos on each plate and 4 nos of barbed

wire on each side including ring (9.38 kg/100 Rmt), Plate also covered by CC if

required and all section having coat of red lead and painting with selected colour

guide by engineer incharge.

138 Clearing and grubbing road land including uprooting rank vegetation grass 0.01 Hect. 28393.04

bushes, shrubs, sapling and trees girth up to 300 mm removal of stumps of

trees cut earlier and disposal of unserviceable materials (C) By mechanical

means in area of light jungle.

139 Providing, laying and spreading 150 mm Granular sub-base (Grade-I) by 14.07 Cum 1472.58

providing close graded B.T.M.C. material in single layer with motor grader on

prepared surface, mixing by mix in place method with rotovator at OMC and

compacted with vibratory roller 80 to 110 KN static weight to achieve desire

density etc. completed.

140 Providing and laying compacted WBM of Grading-II MCBT metal of size 53 to 7.04 Cum 1945.26

22.4 mm in required layers including using 24% stone screening, 11.2 mm size

and 8% stone dust as filler including spreading watering & consolidation by

vibratory roller etc. as per MoRTH Specification complete as directed by

Engineer - in - charge.

141 Providing and filling in foundation with ordinary cement concrete M-100 mix and 10.04 Cum 3212.00

providing necessary vertical pin headers including formwork, vibrating, ramming

and curing complete.

142 Providing & casting in situ ordinary cement concrete M-250 mix with Trimix C.C. 18.75 Cum 4976.27

Road laid as directed including temping, vibrating, finishing, curing and filling in

joints with bitumen etc as per Engineer Incharge.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

143 Carrying out plinth treatment to post construction / existing structure by spraying 27.00 Sq.m. 63.80

chemical solution for termite control treatment including labour and material

consistent with I.S.I. specification. Using Chlordene and Chiorpurfiles 20 EC. As

per 6131_paret-II Concentration weight one percent is recommended i.e. one

litre 20 EC chemical emulsion with 19 liter give 1% concentration inclusive of

one litre chemical emulsion application at the rate of 5 Litre chemical / Sq.m of

surface is recommended as per I.S.

144 Providing and laying polished Kota stone slab flooring over 20mm (average) 23.95 Sq.m. 1043.53

thick base of cement mortar 1:6 (1 cement : 6 coarse sand) or L.M. 1.1.5 laid

over and jointed with grey cement slurry including rubbing and polishing etc.

complete. (B) 30 mm thick

145 Providing 20mm thick cement plaster in single coat on single or half brick walls 82.94 Sq.m. 244.42

for interior plastering upto floor two level and finished even and smooth in

cement mortar 1:4 (1 cement : 4 sand) including galvanised iron chicken mesh

146 Providing and fixing wash basin with single hole for pillar tap with C.I. or M.S. 1.00 No. 7325.53

brackets painted white including cutting holes and making good the same but

including fittings.(A) Vitreous china (ii) Flat Back wash basin 560 mm x 410mm x

147 Providing & casting in situ ordinary cement concrete M-150 mix and providing 37.00 Cum 3785.48

necessary pin headers including shuttering, scaffolding, laying, vibrating and

finishing concrete without v-grooves (A) 0 to 5 mt.

148 Supplying and fixing reinforced concrete heavy duty non-pressure pipes with 8.00 Rmt. 4685.19

collars for culverts including setting and joining the pipes in C.M. 1:2 watering

and laying (To level of slops of I.S. 458 / 1971 Class NP4 of following internal

diameter. (iv) 900 mm dia.

149 Filling around the pipes with murrum including dressing, tampering etc. 28.00 Cum 147.95

150 White washing with lime on wall surface (two coats) to give an even shade 45.00 Sq.m. 12.09

including thoroughly booming the surface to remove all dirt, dust; mortar drops

and other foreign matter.

Electrical Items

151 Point wiring for Light / Bell with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) 51.00 Each 485.81

both are of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper

wires up to 10 mtr length, in below type of pipe erected with 6A Modular type

switch / bell push & accessories and earth continuity of following type, erected

on PVC / Metallic / Wooden box, single mounting base frame covered with

textured / metallic / white front plate modules erected on / in wall / ceiling as per

pipe erected, with necessary Lamp holder/ceiling rose / H.D. Connector as

directed. (f) with medium class Rigid PVC pipe and accessories erected

concealed in wall/ceiling complete. Cat. III

152 Point wiring for FAN with 2-1.5 sq.mm & earth wire of 1.5 sq.mm (Green) both 20.00 Each 674.68

are of ISI marked 1.1 KV Grade FRLS PVC insulated multi strand copper wires

up to 10 mtr length, in below type of pipe erected with 6A Modular type switch

and hum free EME step type electronic fan regulator mounted and accessories

with earth continuity of following type erected on PVC / Metallic / Wooden box,

single mounting base frame covered with textured / metallic / white front plate

modules erected on / in wall / ceiling as per pipe erected with necessary ceiling

rose / H.D. Connector as directed. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat. III

153 Point wiring for on board Looped Plug with 6A Modular type switch & 5 pin 11.00 Each 257.55

socket erected on PVC / Metallic / Wooden box, single mounting base frame

covered with textured / metallic / white front plate modules erected on / in wall /

ceiling with following type accessories. Cat. III

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

154 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 15.00 Each 510.05

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch &

5 pin Plug erected on PVC / Metallic / Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [I] For 6A Plug and 6 a switch with 2-1.5 sq.mm

Cu. Wire from nearby switchboard/mcb db board. (f) with medium class Rigid

PVC pipe and accessories erected concealed in wall/ceiling complete. Cat. III

155 Point wiring for Individual Plug with & earth wire of 1.5 sq.mm (Green) both are 12.00 Each 745.38

of ISI marked 1.1 KV grade FRLS PVC insulated multi strand copper wires up to

10 mtr length, in below type of pipe erected complete with Modular type switch

& 5 pin Plug erected on PVC / Metallic / Wooden box covered with appropriate

front plate modules erected on / in wall / ceiling as per pipe erected with

following type of accessories. [III] For 16A Plug and 16 amp switch with 2-2.5

sq.mm Cu. Wire from mcb db board. (f) with medium class Rigid PVC pipe and

accessories erected concealed in wall/ceiling complete. Cat. III

156 Providing & erecting insulated socket 3P+N+E with Plug16A rating which is 2.00 Each 1706.90

comprised of Four pole MCB slot and insulated socket IP40. Cat-III

157 Providing following type of Modular Type Accessories mounted with PVC / -

metallic / Wooden box, single mounting base frame covered with textured /

metallic / white front plate, modules erected with necessary connections as per

site situation directed by Engineer in charge.

(3) Two Pin/RJ-11 Telephone Socket 4.00 Each 160.59

[A] For One Gang- Cat. III

(8) Computer RJ-45 socket 4.00 Each 160.59

(10) 6/16 Amp. Universal socket. Cat.III 4.00 Each 199.98

158 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked

stranded Copper conductor wire in following type of pipe to be erected in / on

wall / ceiling with 2.5 sq.mm copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of following size. (A) With medium class

Rigid PVC pipe and accessories

(i) 4 wire 10 sq. mm (use earth wire of 4 sq.mm ) 45.00 RM 425.21

(h) 4 wire 6 sq. mm 40.00 RM 260.58

159 Providing and erecting Sheet Steel powder coated MCB distribution board - flush

/ surface mounted fitted with busbar, neutral link, earth bar and DIN rail,

Conforms to IS 8623-1 & 3, IEC 61439-1 & 3 without MCB to house appropriate

nos. of MCBs. (The DBs should be used of same company of MCB to be used)

suitable for (B) three phase incoming and single phase horizontal type outgoing

Per phase isolation type (PPI) (b) sheet steel double door

(ii) 6 way 1.00 Each 2913.85

160 Providing and erecting Approved make Four pole moulded case circuit breaker

having breaking capacity ICU of 25 KA. at 415 V,having normal current rating up

to 25 A to 100A. with Fixed thermal & magnetic release suitable to work on A.C.

supply 50 c/s. with all internal connections, spreader tinned copper & complete

erected in existing 16 G.M.S. housing.

ICS=100% of ICU only - Cat III 1.00 Each 6173.12

161 Providing and erecting Approved make RCCBs conforming to IS: 12640 and

having sensitivity of 30 mA and Short Circuit withstand capacity of 10 KA and

suitable for operation on single phase 240 V,50Hz. having characteristic of quick

action & tripping with all advance feature & do not incorporate any electronic

component for following Max. rating erected as directed

(ii) 40 Amps. DP Cat. III 3.00 Each 2235.13

(iii) 63 Amps. DP Cat. III 3.00 Each 2654.28

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

162 Providing and erecting Miniature circuit breaker single pole 6A to 25A suitable to 26.00 Each 112.11

operate on 240 V A.C. system and having breaking capacity 10 KA to be

erected in existing box confirming to IS 8828/1996 with ISI Mark Cat. III

163 Providing & erecting 415 V MCB three Pole for Motor & Inductive Load (C 2.00 Each 587.82

Curve) having 10KA breaking capacity & confirms to IS :8828 in existing box

having following capacity (b) 6-32 Amp. Cat. III

164 Providing & erecting 415 V MCB Four Pole for Motor & Inductive Load (C Curve)

having 10KA breaking capacity & confirms to IS :8828 in existing box having

following capacity.

165 Supplying & erecting in earthpit of minimum bore dia. 225mm size approved 2.00 Each 5842.85

make Safe Earthing Electrode consisting Pipe-in-Pipe Technology as per IS

3043-1987 made of corrosion free hot dipped G.I. Pipes having Outer pipe dia

of 80 mm having 80-200 Micron galvanising, Inner pipe dia of 40 mm having 200-

250 Micron galvanising, connection terminal dia of 14 mm with constant ohmic

value surrounded by highly conductive compound with high charge dissipation

suitable for following type of applications with chamber and heavy duty cover (A)

(approved make OEM has to submit test certificate including value of earth

resistance of installation duly stamped and signed by agency and officer

Incharge has to ensure the value of earthing resistane mentioned in test

Certificate) & having back filling compound of (B) Inner chemical (CCM

Compound)- Resistivity:- 0.2 ohm / meter testing as per IEC 62561-2017,

Voltage drop :- < 1 volt at no load & dry form, Sulphar content :- 2% (C) Back fill

Compound :- Earthing compound should be capable to retain moisture for long

time necessary test report must be submitted by Agency.

[A] For electrical installation up to 440 V Length of Pipe - 1 Mtr

Back filling compound - 1 Nos. of Bag of 15 Kgs.

166 Providing and erecting Pipe type earthing with 40 mm dia. 2.5 mtr long 'B' grade 2.00 Each 823.15

G.I. pipe with necessary coupling buch buried in specially prepared earth pit &

G.I. earth wire of 8 SWG erected & connected as directed (For panel)

167 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 17.00 Each 373.70

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/CRCA/ aluminium die cast

powder coated and high U.V. & corrosion resistance with diffuser with company

mark/name 160V to 270V, Power Factor more than 0.9, THD < 15%, CCT

K to 6500K, Luminaire efficacy> 85 lumens/watt, LED driver efficiency > 85 %

(fitting required LM-79 & LM-80 Certificates) (NOTE: Below description have

shown ranges of Wattage capacity of LED fittings. The Engineer incharge may

select any wattage capacity between the ranges shown) (A) Tube Light with

integral driver (iv) 22-24 Watts, Surge - 2KV,IP-20, conventional 4 feet

168 Supplying and erecting led lamps with following wattage capacity of 220 to 240 12.00 Each 112.11

voltage, minimum 15000 burning hours life, 500 V in built-surge protection,

Polycarbonate diffuser, mounting suitable for E14 / E27 / B22 lamp holders, pf

>= 0.5 (A) LED Lamps integral type, with PC diffuser suitable LAMP holder (ii)

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

169 Supplying and erecting LED indoor fittings with LEDs of wattage 0.2 Watt to 0.5 15.00 Each 427.23

Watt assembled on single MCPCB, with housing used as a heat sink shall be

made of thick sheet Steel conforming to IS: 513/ CRCA/aluminium pressure die

cast powder coated and high U.V. & corrosion resistance with diffuser housed in

aluminium casted body with company mark/name 160V to 270V,Power Factor

more than 0.9, THD < 15 %, CCT 3000 K to 6500K, Luminaire efficacy>

lumens/watt, LED driver efficiency > 85% (fitting required LM-79 & LM-80

Certificates) (NOTE: Below description have shown ranges of Wattage capacity

of LED fittings. The Engineer incharge may select any wattage capacity between

the ranges shown) (A) Square/ Circular shaped Surface/Recessed Mount

Downlight with provision for spring loaded mounting clips complete. IP20 (ii) 11-

15 watts, Surge-2 KV - Cat III

170 Supplying and erecting LED street light / Flood light fittings with High power 7.00 Each 3345.12

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10%, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85%. (fittings

required LM-79 & LM-80 certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown) (A) Street Light (IP-65), Surge

protection -4KV integral and Light must have 440VAC line supply with over-

voltage protection. (i) above 36 to 48 watts

171 Supplying and erecting LED street light / Flood light fittings with High power 5.00 Each 4997.48

White LEDs wattage of 3 Watt and above assembled on single MCPCB,

efficiency more than 130 lm/w and corrosion free High pressure die cast

aluminum housing with smooth finish powder coated and heat sink extruded

aluminium with diffuser and Polycarbonate optics/ lenses, with toughened glass

with company mark/name engraved or embossed 160 to 270 V,Power Factor

more than 0.95, THD < 10%, CCT 3000 K to 5700K, Uniformity ratio >0.45,

Luminaire efficacy> 100 lumens/watt. LED driver efficiency > 85%. (fittings

required LM-79 & LM-80 certificates) (NOTE: Below description have shown

ranges of Wattage capacity of LED fittings.The Engineer incharge may select

any wattage capacity between the ranges shown) (A) Street Light (IP-65), Surge

protection -4KV integral and Light must have 440VAC line supply with over-

voltage protection. (ii) above 48 to 60 Watts

172 Supplying and erecting approved make Octagonal pole made from HR sheet 5.00 Each 6874.06

steel. The pole should be made as per IS and shall be coated with hot dip

galvanizing as per IS 2629/2633/4759, suitable suspend local wind speed with

integral Junction box consist of terminal plate of min 6mm Hylam sheet,

standard profile 35mm x 7.5mm Din-Rail for MCB Mounting, stud type terminal

and arrangement for cable termination to be erected with suitable foundation

(Included) as per details given by manufacturer considering site requirement. (C)

5 Mtr. Long 70 mm top x 130 mm bottom dia, 3 mm thickness with 200mm x

200mm x 12mm base plate, 4-M16 Bolts and 600mm long with necessary G.I. J

bolts. Approx pole weight 46 kg

173 Supplying and erecting Street light pole bracket comprising main B Class GI pipe 5.00 Each 491.87

of 4.2 cm/require outside dia. complete with suitable B Class G.I. sleeve tubing

of approx. 45cms.length and suitable for 76.5mm / 80mm / require size of pole

top having nuts and bolts for fixing the brackets and having spread of 0.5 mtr.

Length with 110 deg. with vertical plan and suitable welded stiffener reducer and

nipple with check nut complete painted with one coat.of Red oxide / PU base

primer and two coats of Aluminium / PU paint. paint with following nos of arms.

[A] Single Arm Bracket 0.5 Mtr.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

174 Providing and erecting Mains with 1.1 KV grade FRLS PVC insulated ISI marked 60.00 RM 62.62

stranded Copper conductor wire in following type of pipe to be erected

concealed in /flushed on wall/ceiling, with 1.5 sq. mm copper conductor FRLS

PVC insulated stranded wire of green colour for earth continuity of following size.

(E) in existing pipe (c) 3 wire 1.5 sq.mm

175 Solder less crimping type Aluminium lugs conforming to IS suitable for cable of 8.00 Each 6.06

following size evenly crimped with high pressure tool & connected to switchgear

terminals with brass/cadmium plated nut bolts in an approved manner. (A) 1.5/

176 Providing and fixing heavy duty flange type brass cable gland with rubber ring for 8.00 Each 38.38

PVC insulated armoured cable complete with out going tails, insulating tape etc

for following size of cables. (B) 2 to 4 core 6 Sq. mm

177 Making trench in soft soil of suitable width of 90 cm deep for laying cable or 73.60 RM 55.55

locating the fault all over the run and back filling the same and making the

surface as normal ground.

178 Providing & laying approved make Double walled corrugated pipes (DWC) of 73.60 RM 62.62

polyethylene (conforming to IS 14930 II) with necessary connecting accessories

of same material at required depth in existing trench for laying of cable below

ground / road surface for enclosing cable. (A) 50 mm outer dia.

179 Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand / 100.00 Each 126.25

Solid Aluminium conductor for 1.1 KV. to be laid on wall with necessary clamps

or in existing trench / pipe of following size of cables. (B) 4 core 6 Sq.mm

180 Providing & erecting Approved make Power Saving 50 Watt Ceiling Fan with 17.00 Each 1948.29

double ball bearing ISI mark with Condenser 230 volt A.C. 50 Hz 1200 mm

sweep complete having 3 blades with aluminium blades with canopy & 30 cm.

down rod erected with earthing. (Make shall be approved by Engineer in charge)

181 Supplying & erecting approved make low noise decorative exhaust fan having 3.00 Each 1703.87

square frame ABS body with inbuilt lowers & square frame. 200mm with

i.e. Rs. One Crore Nineteen lacs Sixty Four thousand Five hundred Sixty One and Fifteen paisa only.

Deputy ExecutiveExecutive

Deputy Executive

I/We am/are willing to carry out the work @ ______________ % above/below percent (Should be written

in figures and words) of the estimated rate mentioned above. Amount of my /our tender works out as under.

Estimated amount put to tender Estimated amount put to tender

Deduct………% below Add………% Above

1. The Contractor shall exhibit a board with detailed specification and details of work as directed by the Engineer-In-

Charge for which no extra payment shall be made.

2. The labour cess will be deducted as per prevailing rules i.e. 1% of the work done.

3. GST and Income tax TDS will be deducted at a source while making payments of bills.

4. In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt. G.R.: PRC-

10/2017 Cement Consumption/16/C, Date:11/05/2017 as stated in S.O.R. therefore in R.C.C. items where there is

a change as per actual mix design the cost of difference of cement consumption have been deducted from the rate

of original item at the rate of input rate mentioned in all the tender.

5. The Contractor will have to submit the all required mix design at his own cost before execution as directed

and to be approved from the Engineer in charge.

It. Description of Item Qty. Unit Rates in Total

No. Figure Amount

Above all items of "Schedule-B" with Item Description, Unit, Rate & Amount have verified by me and

Deputy Executive Engineer Sr. Divisional Account Officer Executive Engineer

Panchayat (R & B) Sub Division, Panchayat (R & B) Division, Panchayat (R & B) Division,

Halol Godhra Godhra