Construction of E.T.O. office cum Residence at Jawali

Amount

Excavation in foundation trenches etcetera in earth work in all type of classification of soil such as pick work, jumper work, pick jumper work, blasting work, jumper blasting work, soft and hard blasting and doing work in saturated soil, including chiseling or wedging out rocks where blasting work is prohibited or any other mixed variety of soil, including shoring, strutting, de-watering and pumping or bailing out water (surface and sub soil water) upto any depths or any quantum of water including slush which may arise during de-watering, removal of slush and stacking the excavated soil clear from the edge of excavation within all leads, as directed by Engineer-in- charge and then returning the stacked soil in 15cm (Fifteen centimeter) layers, when required into plinths and sides of foundation etcetera consolidating each deposited layer by ramming, watering and then disposing of all surplus excavated earth as directed by the Engineer-in-Charge, within all leads, and lifts disposed earth to be levelled and neatly dressed including carriage of materials within all leads and lifts and other incidental charges. The rate is includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Excavation in drains and channels etc. in earth work in all kinds of classification of soil such as pick work, jumper work, blasting work, pick jumper blasting work, soft and hard blasting work including chiseling or wedging out rocks where blasting is prohibited and doing work in saturated soil including cost of shoring, strutting and pumping or bailing out water (surface and sub soil water) upto any depth and any quantum of water including clearing of slush which may arise out during dewatering including dressing of sides and bed and disposing of all excavated earth upto any leads and lifts, disposed earth to be levelled and neatly dressed as per direction of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Filling in plinth with sand under floors including watering ramming, consolidating and dressing complete as per HPPWD specifications or as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and filling brick bats stone aggregate 40mm (fortym milimetre) in soak pit complete in all respect as specified as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Boulder filling tightly hand packed with hard stone under floor including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Foundation footings, basis of columns etcetera and mass concrete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Columns Pillars posts and struts, (Square rectangular or polygonal in plan) in any heights/ thickness/ depths upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Beams, cantilevers, girders and lintels, sides and soffits of beams, beam haunchings, cantilevers, girders, bressumers and lintels upto any heights/ depths/ thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etcetera with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Flat surfaces such as soffits of suspended floors, roofs landings shelves and the like floor etcetera upto any thickness upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frame 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Stair cases with sloping or stepped soffits excluding landings upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring in all heights below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Vertical surfaces such as walls (any thickness) partitions and the like including attached pillasters buttresses, plinth and string courses and the like, upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing form work with steel plates 3.15mm (Three point one five millimeters) thick welded with angle iron in frames 30x30x5mm (Thirty into thirty into five millimeters) so as to give a fair finish including centring, shuttering, strutting and propping etc. with wooden battens and ballies for all heights/ depths heights of propping and centring below supporting floor to ceiling upto any heights and removal of the same for in-situ- reinforced concrete and plain concrete work in: Edges of slabs and breaks in floors and walls upto any width, upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:6:12 (One cement is to six sand : is to twelve graded crushed/ broken stone aggregate 40mm (Forty millimeters) nominal size and curing complete excluding cost of form work in foundation and plinth in all depths, including pumping or bailing out water/dewatering and removal of slush as required at site complete as per HPPWD specification or as directed by the Engineer-in-Charge, and carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mixed designed to obtain the minimum compressive strength of grade M-20 (M-Twenty) and curing complete excluding the cost of form work in foundation and plinth in all depths, includng pumping or bailing out water if any including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work, in foundation and plinth in all depths including pumping or bailing out water/ dewatering and removal of slush as required at site complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge and carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:2:4 (One cement : two sand : four graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) to obtain the minimum crushing strength of grade M-20 (M-twenty) and curing complete, excluding the cost of form work and reinforcement for reinforced concrete work in Foundation, footing, bases of columns and the like and mass concrete including pumping or bailing out water and removal of slush if any and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC Grade M-20 (M-Twenty) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in suspended floors, roofs, landings, shelves and their supports balconies, beams, girders, bressumers and cantilevers in all depths/thickness upto all floor level, including carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC Grade M-20 (M-Twenty) including curing complete as per H.P.P.W.D. specification or as directed by Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in columns, pillars, posts and struts in all depths/ thickness upto all floor level, including carriage of materials within all leads and lifts and other incidentals. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC Grade M-20 (M-Twenty) including curing complete excluding the cost of form work and reinforcement for reinforced concrete work in stair cases (except spiral stair cases) excluding landing but including preparing of top surface and finishing of nosing upto all floor level complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing in reinforced cement concrete work smooth finishing of the exposed surfaces with cement mortar 1:3 (one cement : three sand) including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated upto all floor levels reinforced cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) and curing complete to give a smooth and even surface including form work but ecluding cost of reinforcement in string courses, coping, bed plates, anchor blocks plain windows sills and the like complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (twenty milimetres) nominal size) mix designed to obtain the minmum compressive strength of grade M-20 (M-Twenty) for reinforced concrete Chajjas up toany thickness upto floor all level including finishing the exposed surfaces with cement mortar 1:3 (one cement : three sand) to give a smooth and even surface including centring/ form work and curing complete excluding the cost of reinforcement, as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:4:8 (One cement : four sand : eight graded/ crushed stone aggregate 40mm (Forty milimetres) nominal size) and curing complete excluding the cost of form work in foundation and plinth/ depressed floor in all depths, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated upto all floor levels cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres nominal size) and curing complete including centring and shuttering in kerbs, steps and the like complete as per HP:PWD. Specifications or as per directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete 1:1½:3 (One cement : one and half sand : three graded/ crushed stone aggregate 20mm (Twenty milimetres) nominal size) mix designed, so as to give a compressive strength corresponding to RCC grade M-25 (M-Twenty five) with minimum cement contents of 400kg (Four hundred kilogrammes) per cubic metre including curing complete as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, excluding the cost of form work and reinforcement for reinforced concrete work in foundation, footings, bases of columns etcetera and the like and mass concrete including carriage of materials within all leads and lifts and other incidental. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying mechanically mixed and vibrated cement concrete work 1:1½:3 (One cement : one and half sand : three graded crushed/ broken stone aggregates 20mm (Twenty millimeters) nominal size) mix designed to obtain the minimum compressive strength of grade M-25 (M-twenty five) including curing complete, excluding cost of form work and reinforcement for reinforced concrete work, in walls (any thickness) but not less than 0.10m (zero point one zero metre) including attached pilasters, buttresses plinth and string courses ecetera from top of foundation upto all floor level complete as per HPPWD specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying damp proof course 38mm (Thirty eight milimetres) thick with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 12.5mm (Twelve point five milimetres) nominal size) and curing complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Applying a coat of hot bitumen (mexphalt 80/100 (Eighty/ one hundred) or equivalent) using 1.70 kg (One point seven zero kilogrammes) per Square Metre on damp proof course after cleaning the surface with a piece of cloth lightly soaked with kerosene oil complete as per HP:PWD. Specifications or as per the directions of the Engineer-in-Charge, , including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying Mild steel/ tor steel reinforcement for reinforced cement concrete work including bending, binding and placing in position complete in all heights including cost of binding wires complete and other incidentals due for its completion and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stone of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/ dewatering including racking out joints in cement mortor 1:5 (One cement : five sand) and cuing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Squared rubble masonry coursed with hard stones of approved quality in foundation and plinth upto all heights/ depths including pumping or bailing out water/dewatering and including racking out joints with cement mortor 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 15cm (fifteen centimetre) thick pre-cast cement concrete hollow block masonry in wall with cement concrete blocks of approved size including quoin block, jamb block and closers, etcetera made of cement concrete 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimetres) nominal size) laid with cement mortar 1:6 (One cement : six sand) including curing complete in super structure upto all floor level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Precast concrete block masonry in partition walls 10cm (ten centimeters) thick with hollow blocks of approved size (including quoin blocks, jamb blocks, closers etc.) made of cement concrete 1:3:6 (one cement : three sand : six graded stone aggregate 40mm (forty milimetre) nominal size) in and down gauge cement mortar 1:6 (one cement : six sand) upto all floor level, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth upto all heights/ depths in cement mortar 1:6 (one cement : six sand), including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in foundation and plinth upto all heights/ depths in Mud mortar, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Brick work using second class common burnt clay building bricks in super structure above plinth level upto all heights/ floor level in cement mortar 1:6 (One cement : six sand) and curing complete, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Half brick work using second class common burnt clay building bricks in super structure above plinth level upto all floor level in cement mortar 1:4 (One cement : four sand) with hoop iron as per H.P.P.W.D. specification or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M.S. (Mild steel) plain grills of required pattern in structural steel/ wooden frames of windows etcetera with M.S. flats, square or round bars, bolts and nuts or screws including welding with frames complete in all respect including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (Forty milimetres) thick second class deodar wood panelled glazed or panelled and glazed shutters for doors windows and clerestory windows including black enameled iron butt hinges with necessary screws, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 35mm (thirty five milimetres) thick flush door shutters interior grade, commercial type core of block board construction with frame of First class hard wood and well matched commercial ply veneering with vertical grains of cross bands and face veneers on both faces of shutters including black enameled M.S. butt hinges complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 25mm (twenty five millimetres) thick commercial board water proof shutter for cup board with 6mm (six milimetres) thick hard wood edging and 6mm (six milimetres) thick ply beading as specified including fixing with nickle plated bright finished piano hinges with necessary screws etcetera complete as per H.P.P.W.D. specifications or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 40mm (Forty millimetres) thick second class deodar wood wire gauge shutters using galvanized M.S. wire gauge of I.S. gauge designation 85G (eighty five galvanized) with wire of diameter 0.56mm (Zero decimal five six millimetres) for doors, windows and clerestory windows including bright finished black enamelled iron butt hinges with necessary screws, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x16mm (Three hundred into sixteen milimetres) anodized aluminum sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 25mm (twenty five milimetres) thick water proof commercial board water proof shutters for SDB/FF with 6mm (Six milimetres) hard wood edging and plain galvanized iron sheet lining in side including fixing with nickel plated bright finished piano hinges with necessary screws etcetera complete, as specified as per the directions of the Engineer-in-Charge including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 19mm (Nineteen milimetre) thick water proof/commercial board in shelves/box for cup boards with butt jonts and fixing with nails and screws etcetera complete, as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing cabinet work made of 19mm (nineteen milimetres) thick water proof/ termite resistant commercial board bon including shutters and shelves back side of cup board/ cabinet shall be made of 8mm (eight milimetre) thick ply. All cut portion of shelves shall be finished with 6mm (six milimetre) thick hard wood edging. The shutters from out side shall be finished with 1mm (one milimetre) thick lamination of approved shade complete including fixing with nickle plated bright finished piano hinges and 65x35mm (sixty five into thirty five milimetre) brass cup board lock complete as per design/ drawing and carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 250x16mm (Two hundred fifty into sixteen milimetres) anodized aluminum sliding door bolts anodized Transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 300x10mm (three hundred into ten milimetres) anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 200x10mm (two hundred into ten milimetres) anodized aluminum Tower bolts(Barrel type) anodized transparent or dyed to required colour and shade with bolts and nuts necessary screws etc. complete including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 125mm (One hundred twenty five milimetres) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 75mm (seventy five milimetres) aluminum handles anodized transparent or dyed to required colour and shade with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty milimetres) bright finished black enameled iron helical door spring with necessary screws etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials, within all leads, lifts of materials and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) bright finished brass floor door stopper with rubber cushion and necessary screws etcetera to suit shutter thickness complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying Kota stone slab 30mm (thirty milimetre) thick of size 55x55cm/ 55x27.5cm (fifty five into fifty five / fifty five into twenty seven point five centimeters) with 7.5cm (Seven point five centimeters) wide Jaisalmer yellow band in flooring laid on 20mm (twenty milimetres) average thick base of cement mortar 1:4 (One cement : four sand) and jointing with grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing complete upto all floor levels, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Kota stone slab 25mm (Twenty five milimetres) thick in risers of steps, skirting, dado and pillars upto a any height laid on 12mm (Twelve milimetres) average thick cement mortar 1:3 (one cement : three sand) and jointing with Grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete upto all floor levels including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying automatic hydraulically compressed and polished precast terrazzo tiles of size 30x30cm (Thirty into thirty centimeters) and 25mm (Twenty five millimetres) thick of I.S.I. marked No. I.S. 1237 in 50% white and 50% grey cement in yellow and moorum chips of O.B. and 2b sizes of NTC or its equivalent laid in floors, treads of steps and landing on a bed of 25mm (Twenty five milimetres) average thickness of cement mortar 1:6 (One cement : six sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with the tiles of silver grey shade upto all floors level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five milimetres) automatic Hydraulically compressed and polished terrazzo tiles of I.S.I. marked No.I.S. 1237 In 50% white and 50% Grey cement in white, yellow and maroon chips of O.B. and 2 B sizes of NTC or GTC as per approved shade in skirting and risers of steps uoto any height on 10mm (ten milimetres) thick cement plaster 1:3 (one cement : three sand) upto all floors level jointed with neat cement slurry mixed with pigment to match the shade of tiles (wherever required) including rubbing and polishing complete with tiles of Silver Grey shade including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying Antiskid Ceramic tiles of premium quality of Nitco/ Kajaria/ Somany/Bell/AGL/ swastika or its equivalent tiles 5.5mm (five point five milimetres) thick 300x300mm (three hundred into three hundred milimetres) size in flooring, treads of steps laid on a bed of 12mm (twelve milimetres) thick cement mortar 1:3 (one cement : three sand) finished with flush pointing in white cement upto all floor levels, as specified as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 600x600mmx 10mm (Six hundred into six hundred milimetres into ten milimetre) double/ ultra charge matt finished vitrified tiles of Nitco/Kajaria/ Orient as per approved shade and colour in flooring,landings treads of steps laid over 12mm (twelve milimetres) thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 600x600x10mm (Six hundred into six hundred into ten milimetre) double/ ultra charge matt finished vitrified tiles of Nitco/ Kajaria as per approved shade and colour in skirting risers of steps and dados on 12mm (twelve milimetres) thick cement mortar 1:3 (one cement : three sand) jointed with neat cement slurry mixed with pigment to match the shade of tiles as required complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government

Providing and laying 300x300x25mm (Three hundred into three hundred into twenty five milimetres) Labrador tiles (Rain bow series) of NTC or GTC manufactured of approved shade and colour in flooring, treads of steps and landings laid over a bed of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry mixed with pigment to match the shade of tiles as required and specified upto all floors levels, as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 300x300mm (Three hundred into three hundred milimetres) Antiskid Ceramic tiles of premium quality of Nitco/ Kajaria/ Sommany/ Bell/ AGL/ swastika or its equivalent tiles 5.5mm (five point five milimetres) thick in skirting, risers of steps and dado upto any height on 12mm (Twelve milimetres) thick cement plaster 1:3 (One cement : three sand) and jointed with neat cement slurry mixed with pigment to match the shade of tiles upto all floors levels, as specified as per the direction of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 20mm (Twenty millimetres) thick polished Baroda Green marble work (table rubbed and polished) in flooring laid over 20mm (Twenty millimetres) thick base in cement mortar 1:3 (One cement : three sand) including jointing with cement mortar 1:2 (One white cement : two marble dust) with an admixture of pigment to match the shade of the marble complete upto all floor level including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing mild steel channel frame for doors, windows and ventilators manufactured from mild steel channel section ISLC-75 (Seventy five)with channel section 75x40mm (Seventy five into forty milimetres) and M.S. (Mild Steel) flat 75x4mm (Seventy five into four milimetres) as per design and approved drawing including hinges, jamb, lock jamb, beeds, if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jamb including steel butt hinges 2.5mm (Two point five milimetres) thick with a provision of locking arrangement and shock absorber as specified and including applying a coat of approved steel primer after pretreatment of the metal surfaces complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing mild steel channel frame for doors, windows and ventilators manufactured from ISLC-75 (Seventy five) mild steel channel section 75x40x4mm (Seventy five into forty into four milimetres) as per design and approved drawing including hinges, jamb lock , jamb beeds, and if required angle thrashold of mild steel angle 50x25mm (Fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs, with split ends tails to each jamb including steel butt hinges 2.5mm (Two point five milimetres) thick with a provision of locking arrangement and shock observers as specified and including applying a coat of approved steel primer after pretreatment of the metal surfaces complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing angle iron cupboard frames manufactured from M.S. angle iron section 25x25x5mm (Twenty five into twenty five into five milimetres) thickness including hinges, jamb, lock jambs, beed and if required angle tharshold of mild steel angle 25x25mm (Twenty five into twenty five milimetres) welded or rigdly fixed by mechanical means, lugs with split end tails to each jamb including steel butt hinges 2.5mm (Two point five milimetres) thick with provision for locking arrangement and shock observer as specified and applying a coat of approved steel primer after pretreatment of the surface as directed by Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government

Providing and fixing 0.60mm (Zero point six zero milimetres) thick ISI marked Z-120 (Z-one hundred twenty) prepainted galvanized steel sheet in roofing over steel trusses with hot dipped metallic Zinc coated sheets with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (five) microns primer coting to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (Six milimetres) dia metre with prepainted limpet and rubber washers filled with required shade of colour and laid complete, with all accessories required upto any height as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ridges or hips 60cm (sixty centimetre) overall with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 prepainted steel sheet in roofing with hot dipped metallic Zinc coated sheet with top coat of regular modified polyster (RMP) organic coating of 20 (Twenty) microns over 5 (Five) microns primer coating plus back coat of polyster of5 (five) microns over 5 (five) microns primer coating including fixing with prepainted iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Valley 60cm (sixty centimetre) overall with 0.60mm (zero point six zero milimetre) thick ISI marked Z-120 (Z-one hundred twenty) prepainted steel sheet in roofing with hot dipped, metallic zinc coated steel sheet with top coat of regular modified polyster organic coating of 20 (Twenty) microns over 5 (five) microns primer coating to back coat of polyster of 5 (five) microns over 5 (five) microns primer coating including fixing with prepainted galvanized iron J or L hooks, bolts and nuts 6mm (six milimetres) diameter with prepainted galvanized iron limpet and bitumen washers filled with required shade of colour and laid complete within all accessories as required upto any height as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M,S. BP (Back plain) sheet 1.66mm to 2mm (one point six six milimetres to two milimetres) thick in eaves board/facia/soffits/ ceiling including cutting, fixing and welding to steel roof members and applying a coat of red lead primer complete as per the instruction of Engineer-in-Charge (Base members of steel work shall be measured and paid separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 0.63mm (Zero point six three milimetres) thick plain galvanised iron sheet 30cm (thirty centimeters) wide 25cm (twenty five centimetres) overall semicircular plain G.I. (Galvanised iron) sheet gutter with iron brackets 40x3mm (Forty into three milimetres) size bolts and nuts and washers etcetera including making necessary connections with rain water pipe complete as per design and drawing, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face 100mm (One hundred milimetres) diameter P.V.C. (D-Plast) or its equivalent rain water pipes of working pressure not less than 4.50 kg (Four point five zero kilogrammes) per Square Metre including filling the joints with approved adhesive including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) or its equivalent plain bend 100mm (one hundred milimetres) diameter for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing on wall face P.V.C. (D-plast) or its equivalent plain shoe 100mm (one hundred milimetres) diameter for rain water pipes including filling the joints with approved adhesive complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) diameter mild steel holder bat clamps of approved design to C.I., S.C.I., or P.V.C. pipe embedded in and including cement concrete blocks 10x10x10cm (Ten by ten by ten centimeters) of 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) including cost of cutting holes and making good the walls etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (One hundred fifty milimetres) diameter mild steel holder bat clamps of approved design to C.I., S.C.I., or P.V.C. pipe embedded in and including cement concrete blocks 10x10x10cm (Ten by ten by ten centimeters) of 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) including cost of cutting holes and making good the walls etcetera complete as per the directions of the Engineer-in-Charge, including carriage of material within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Making khurras 45x45cm (Forty five into forty five milimetres) average minimum thickness of 5cm (five centimeters) cement concrete 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (twenty milimetres) nominal size) finished with 12mm (twelve milimetre) cement plaster 1:3 (one cement : three sand) and coat of neat cement including the outlet complete, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Grading of roofing for water proofing treatment with cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) and curing complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying brick tiles over mumty roofs grouted with cement mortar 1:3 (One cement : three sand) over a layer of 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) and finished neat complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing angle iron door frames (single relsate) manufactured from mild steel angle section of 35x35x4mm (thirty five into thirty five into four milimetres) thickness with mild steel flat 50x4mm (fifty into four milimetres) in combination welded together to make one frame as per design and drawing including hinges, jamb, lock, jamb, beed and if required angles thrashold of mild steel angle 50x25mm (fifty into twenty five milimetres) welded or rigidly fixed by mechanical means lugs with split end tails to each jamb including steel butt hinges 2.5mm (two point five milimetres) thick with a provision of locking arrangements and shock observers as specified and applying a coat of approved steel primer after pretreatment of the surfaces as per directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. Fixed steel windows

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections joints mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. Side hung windows

Providing and fixing steel glazed doors, windows and ventilators of various type categorized below, of standard rolled steel sections, joints, mitred and welded with 16x3.15mm (Sixteen into three decimal one five millimeters) lugs 10cm (Ten centimeters) long embedded in cement concrete block 15x10x10cm (Fifteen into ten into ten centimeters) size of 1:3:6 (One cement : three sand : six graded stone aggregate 20mm (Twenty millimeters) nominal size) or with wooden/steel plugs and screws or rawl plugs and screws or with fixing clips or with bolts and nuts as required and iron fitting such as handles, tower bolts etc. including providing and fixing of glass panes 4mm (Four milimetres) thick with glazing clips and special metal sash putty of approved make complete including applying priming coat of red lead paint and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.Top hung ventilator.

Providing and fixing MS fan clamps type-I of 16mm (Sixteen milimetres) diameter M.S. bars bent to shape with hooked ends in RCC slabs during laying including painting the exposed portion of loop all as per standard design complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work composed of beams joists, channels, angles, tees, flats and connecting plates of angle cleats etcetera as in trusses and trussed purlins, main and cross beams, hip and jack rafters purlins connected to common rafters and the like in building including cutting fixing, lifting hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HP:PWD. Specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing M.S. posts with M.S. pipe 100mm (One hundred milimetres) diameter in cement concrete base complete in all respects as per detail and drawing and as per the directions of the Engineer-in-Charge. (C.C .(cement concrete) base to be measured and paid for separately), including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Steel work welded in built up sections, trusses and framed work, in gratings, framed guard bars, ladders,railing,brackets and similar works, including cutting, fixing, lifting, hoisting and placing in position complete and applying a priming coat of red lead paint complete as per HP:PWD. Specifications or as directed by the Engineer-in-Charge, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 50mm (fifty milimetres) diameter SST/CP pipe handrail slip resistant with round ends at two levels of 75cm (seventy five centimeters) and 90cm (ninety centimeters) height having vertical balusters of 25mm (twenty five milimetres) diameter SST/CP pipe embedded in cement concrete at the rate of 600mm (six hundred milimetre) centre to centre as per drawing, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing85cm (eighty five centimetre) high railing with 50mm (fifty milimetres) diameter SST/CP pipe slip resistant hand rail in combination of 35mm (thirty five milimetres) diameter and 15/20mm (fifteen oblique twenty milimetres) diameter SST/CP pipe blausters as specified in the Drawing, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, sale tax, malkana GST, and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new steel and other metal surface under coat with enamel paint brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter, enamel paint other than white’ including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Applying priming coat over new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil, grease, dirt and other foreign matter sand papering and knotting with ready mixed paint brushing wood primer pink, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Painting two or more coats (excluding priming coat) on new wood and wood based surfaces with enamel paint to give an even shade including cleaning the surface of all dirt, dust and other foreign matter complete with enamel paint other than white and carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on the rough side of brick/concrete/stone walls for interior plastering upto all floor level, including arrises internal rounded angles, chamfers and/or rounded angle in all girth and finished even and smooth complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:6 (One cement : six sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth with water proofing treatment as specified as per the directions of Engineer-in-chrge complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:3 (One cement : three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth with water proofing pretreatment as specified as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

15mm (Fifteen milimetres) thick cement plaster with cement mortar 1:3 (One cement : three sand) in single coat on fair side of brick/ concrete/ stone walls for interior plastering upto floor all level including arrises, internal rounded angles, chamfers and/or rounded angles in all girth and finished even and smooth complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Applying Birla white wall care putty over plastered surface after thoroughly brushing the surface free from mortar droppings, dirt, dust, loose materials and other foreign matters and sand papered smooth to give final matter finish to the surface complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

6mm (Six millimeters) thick cement plaster to ceiling with cement mortar 1:3 (One cement : three sand) for all floors level and curing complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Finishing walls with Apex Weather proof Exterior emulsion of Asian paints/ Nerolac SURAKSHA of approved brand and manufacture as specified on un decorated wall surfaces (two or more coats) to give an even shade after thoroughly cleaning the surface to remove all dirt, dust and other foreign matters sand papered smooth, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Wall painting (two or more coats) with acrylic washable emulsion paint of approved brand and manufacture for interior grade on undecorated concrete/ stone/ plastered wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth including applying of putty as required for making the surface, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Distempering (two or more coats)with dry distemper of Nerolac/ Assian paints of approved brand and manufacture and of required shade on undecorated wall surfaces to give an even shade over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matters including papering the surface even and sand papered smooth including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 12mm (Twelve milimetres) thick unistone/ NTC cladding on 12mm (Twelve milimetres) thick cement mortar 1:3 (One cement : three sand) jointed with cement slurry as specified upto all heights and all floor levels, including scaffolding etcetera complete as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying heavy duty precast cement concrete 60mm (Sixty milimetres) thick inter locking paver blocks vibro compacted upto M-50 (M-fifty) grade including border or kurb block grey or coloured over sub base of concrete with 25mm (Twenty five milimetres) thick average thickness of cement mortar 1:4 (One cement : four sand) laid over and jointed with pigment to match the shade of blocks including curing, rubbing and polishing complete (sub base concrete floor to be measured and paid for separately) as specified as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying 50mm (Fifty millimeters) thick cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) for sub base concrete floor for laying of interlocking paver blocks including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing plinth protection 50mm (Fifty millimeters) thick cement concrete 1:3:6 (One cement : three sand : six graded crushed stone aggregate 20mm (Twenty millimeters) nominal size) including finishing the top surface of concrete smooth, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing course rubble hammer dressed ‘U’ shape surface drain covered with pre-cast removable perforated slab as specified with side walls 15x22cm (Fifteen into twenty two centimeters) in cement mortar 1:6 (One cement : six sand) and in side plastering with cement mortar 1:3 (One cement : three sand) including earth work and laying 10cm (Ten centimeters) thick cement concrete in 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (forty milimetres) nominal size) and 7.5cm (Seven point five centimeters) thick cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (twenty milimetres) nominal size) and finished with a floating coat of neat cement complete as per drawing and design as per specifications and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing under layer for plinth protection of 75mm (Seventy five millimeters) thick (un-consolidated) bed of dry bricks/ stone aggregate 40mm (Forty millimeters) nominal sizes well rammed and consolidated and grouted with fine sand including preparation of ground complete and carriage of materials within all leads, lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches polythene aluminum polythene (PE-AL-PE) composite pressure pipes U.V. stabilized with carbon black and fitting of kitec confirming to IS:-15450-2004 for water supply complete (earth work in trenches to be measured and paid for separately) as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government. 1620 (20mm (Twenty milimetres) outer diameter).

Providing and fixing to wall ceiling and floor polyethylene Aluminum polyethylene (PE-AL-PE) composite pressure pipesU.V. stabalized with carbon black and fitting of kitec confirming to ISI 15450-2004 for water supply complete with necessary fittings including cutting fixing and making good the walls ceiling and floor, as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.1620 (20mm (Twenty milimetres) outer diameter).

Making connections of galvanized mild steel distribution branch with galvanized mild steel main 20mm to 40mm (Twenty milimetres to forty milimetres) bore by providing and fixing tee including cutting and threading the pipes complete, and carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Anglo Indian (Universal closet) Vitreous china wash down water closet of size 57x35x39cm (Fifty seven into thirty five into thirty nine centimetres) (Europen type W.C. pan) of HIND WARE/ CERA MAKE with internal P or S trap including jointing the trap with soil pipe in cement mortar 1:1 (One cement : One sand) (seat and cover to be measured and paid for separately), including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Vitreous china wash basin Delta No.10010 of HIND WARE/CERA MAKE 550x400mm (five hundred fifty into four hundred milimetres) without pedestal with single hole for pillar tap with cast iron or mild steel brackets painted white including cutting holes and making good the same but excluding the cost of fittings, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreeous china wash basin garnet No.10080 of size 58x43cm (fifty eight into forty three centimetres) (under counter basins ) of Hind Ware/Cera/Jquar of star white/ snow white shade with single hole for pillr tap with C.I. or M.S. brackets painted white including cutting holes and making good the same but excluding cost of fittings as specified as per directions of the Engineer-in-Charge upto all floors level, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Hind ware/ Cera make snow white shade vitreous china Urinal large flat back No.60002of size 39x37.5x59cm (thirty nine into thirty seven point five into fifty nine centimetres) including connection the urinal with waste pipe by means of white lead mixed with chopped lamp (waste pipe to be measured and paid for separtely) as specified as per the directions of the Engineer-in-Charge upto all floor level, including carriage of materials within all leads, lifts and other incidentals charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen milimetres) nominal bore) chromium plated brass flush pipe/ spreaders for urinal with necessary fittings such as unions, clamps etcetera (all in chromium plated brass) including cuttings holes and making good the same including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing Hind ware/ cera make vitreous china Division plate for urinals of size 600x300mm (six hundred into three hundred milimetres) with macadam plugs and necessary screws complete, as specified, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing solid type white plastic seat and cover for wash down water closet with C.P. brass hinges and rubber buffers including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 5.00 (five ) litres net capacity PVC low level dual system flushing cistern with a pair of C.I. or M.S. brackets complete with fittings such as lead valve, less syphon 15mm (Fifteen milimetres) nominal size brass ball valve with polythene floats, C.P. brass handles, P.V.C. unions and couplings for connection with inlet, outlet and over flow pipes 40mm (Forty milimetres) diameter including P.V.C. flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 10.00 (Ten ) litres capacity PVC low level dual system flushing cistern with a pair of C.I. or M.S. brackets complete with fittings such as lead valve, less syphon 15mm (Fifteen milimetres) nominal size brass ball valve with polythene floats, C.P. brass handles, P.V.C. unions and couplings for connection with inlet, outlet and over flow pipes 40mm (Forty milimetres) diameter including P.V.C. flush bend and cutting holes in walls and making good the same and connecting the flush bend with cistern and closet (over flow pipe to be measured and paid for separately) including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked stainless steel kitchen sink 610x510x200mm (six hundred ten into five hundred ten) with 200mm ( two hundred milimetres) drain board diamond model code No. WB-2116 with double hole for pillar tap with C.I. or mild steel brackets painted white including cutting holes and making good the same but excluding fittings complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx450mm (Six hundred millimetres into four hundred fifty millimetres) Bevelled edge mirror of superior glass mounted on 6mm (Six milimetres) thick A.C. sheet or plywood sheet and fixed to wooden plugs with C.P. brass screws and washers, complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600mmx20mm (Six hundred milimetres into twenty milimetres) C.P. brass towel rail complete with C.P. brass brackets fixed to wooden plugs with C.P. brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 600x120mm (six hundred into one hundred twenty milimetres) glass self with C.P. brass brackets and guard rail complete fixed to wooden plugs with C.P. brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PTMT Jet spray of approved quality and colour with one metre tube fittings and accessories : complete in all respects, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 110x90mm (one hundred ten into ninety milimetres) P.V.C. floor trap of self cleaning design coplete including fixing with approved adhesive cost of cutting and making good the walls and floors etcetera complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter in position complete C.P. Brass over flow pipe , including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing vitreous china tooth brush and tumbler holder with necessary screws etcetera complete, including carriage of materials within all leads and lifts. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter P.V.C. waste for wash basin or sink, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass soap dish with C.P. brass bracket fixed to wooden cleats with C.P. brass screws, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing chromium plated brass bib tap 15mm (Fifteen millimeter) diameter with capstan head, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. brass (Heavy duty I.S.I. marked No. 8931 and 8934) pillar tap with capstan head complete, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass bib tap 15mm (fifteen milimetres) diameter (superior or heavy duty) complete in all respects, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 15mm (Fifteen millimetres) diameter C.P. brass (Heavy duty I.S.I. marked No. 8931 and 8934) stop cock, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass full way valve with wheel 20mm (Twenty milimetres) diameter complete in all respects, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass full way valve with wheel 15mm (fifteen milimetres) diameter complete in all respects, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass ball valve (Horizontal plunger type) high pressure with polythene plastic floats 20mm (twenty milimetres) nominal bore complete in all respects, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing brass ball valve (Horizontal plunger type) high pressure with polythene plastic floats 15mm (ffteen milimetres) nominal bore complete in all respects, including carriage of materials, within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 30cm (thirty centimeters) long and 15mm (Fifteen milimetres) nominal bore PVC connections pipe with brass unions, complete including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and placing three layered PVC water storage tank (SINTEX or its equivalent made of 2000 litres (Two thousand litres) capacity complete in all respect with necessary fittings and mosquito proof coupling of approved design 15mm (Fifteen milimetres) nominal bore ball valve with polythene float overflow pipe, scour pipe and PVC cover with locking arrangement including providing pads of size as required including hoisting upto any height, and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter M.I. union for wash basin or sink, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) plain bend 150mm (One hundred fifty milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) plain bend 110mm (One hundred ten milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) tees 150mm (One hundred fifty milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) sockets/collars 150mm (One hundred fifty milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) tees 100mm (One hundred milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing PVC (D-plast) socket/collars 110mm (One hundred ten milimetres) diameter fittings and accessories including filling the joints with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches 150mm (one hundred fifty milimetres) diameter P.V.C. (D-Plast) pipe for the disposal of sewerage and soil waste working pressure of pipe not less than 4.50kg/sqm (four point five zero kilogramme) per square metre fittings and accessories including filling the joints with approved adhesive (earth work in trenches to be mesured and paid for separtely) and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches 110mm (one hundred ten milimetres) diameter P.V.C. (D-Plast) pipe for the disposal of rain water and waste water working pressure of pipe not less than 4.50kg/sqm (four point five zero kilogramme) per square metre fittings and accessories including filling the joints with approved adhesive (earth work in trenches to be measured and paid for separtely) and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing Manhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty millimetres) nominal size) foundation concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty millimetres) nominal size) inside plastering 15mm (Fifteen millimetres) thick with cement mortar 1:3 (One cement : three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty millimetres) nominal size) finished smooth complete including curing and testing complete inside size 1200mmx900mm (one thousand two hundred milimetres into nine hundred milimetres) and upto any depth including cast iron cover with frame (medium duty) 500mm (five hundred) milimetre internal diameter total weight of covered frame to be not less than 116 kgs (One hundred sixteen kilogrammes wiehgt of cover 58 kgs. (fifty eight kilogrammes) and weight of frame 58 kgs. (fifty eight kilogrammes) with 300mm (three hundred millimetres) thick walls of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand) including carriage of materials within all leads and lifts and other incidental charge. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing mainhole with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand :four graded stone aggregate 20mm (Twenty milimetres) nominal size) mix foundation concrete 1:4:8 (One cement : four sand :eight graded crushed stone aggregate 40mm (Forty milimetres) nominal size inside plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One cement three sand) finished with a floating coat of neat cement and making channels in cement concrete 1:2:4 (One cement : two sand : four graded crushed stone aggregate 20mm (Twenty milimetres) nominal size) finished smooth complete including curing and testing (a) inside size 800x800mm (eight hundred into eight hundred milimetres) and upto any depths and including C.I. cover with frame (light duty single seal pattern-1) 455x610mm (Four hundred fifty five into six hundred ten milimetres) internal diamension the total weight of cover and frame to be not less than 38kg (Thirty eight kilogrammes) (weight of cover 23kg (Twenty three kilogrammes) and weight of frame 15 kg (Fifteen kilogrammes) (i) with 200mm (Two hundred milimetres) thick wall of brick masonry using second class common burnt clay building bricks in cement mortar 1:3 (one cement : three sand), including carriage of materials within all leads and lifts, and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty milimetres) diameter ISI marked high pressure P.V.C. spigot and socket waste and ventilating pipes complete as per HPPWD specifications or as directed by the Engineer-in-Charge including fixing with approved adhesive and carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 110mm (one hundred ten milimetres) diameter ISI marked high pressure P.V.C. spigot and socket, waste and ventilating pipes complete as per HPPWD specifications or as directed by the Engineer-in-Charge including fixing with approved adhesive and carriage of materials within all leads and lifts and other incidentals charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing brick masonry chamber for under ground cast iron inspection chamber and bends with second class common burnt clay building, bricks in cement mortar 1:5 (One cement : five sand) cast iron cover with frame (light duty) 355mmx610mm (Three hundred fifty five milimetres into six hundred ten milimetres) internal dimensions total weight of cover with frame to be not less than 38 kgs (Thirty eight kilogrammes) (weight of frame 15 kgs. (Fifteen kilogrammes) and weight of cover 23 kgs. (Twenty three kilogrammes) with reinforcement cement concrete top slab 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) foundation concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty milimetres) nominal size) in side plastering 15mm (Fifteen milimetres) thick with cement mortar 1:3 (One cement : three sand) finished smooth with a floating coat of neat cement on walls and bed concrete etcetera complete. In side dimensions 455mmx610mmx450mm (Four hundred fifty five milimetres into six hundred ten milimetres into four hundred fifty milimetres) deep single pipe line complete as per the direction of Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 100mm (One hundred milimetres) nominal diameter ISI marked P.V.C. cowl, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 150mm (one hundred fifty milimetres) nominal diameter ISI marked P.V.C. cowl, including fixing with approved adhesive and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter rubber plug for sink or wash basin, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing 32mm (Thirty two milimetres) diameter C.P. brass chain 50cm (fifty centimeters) long and rubber plug for wash basin or sink, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing ISI marked 32mm (Thirty two millimeters) nominal diameters lead waste pipe for wash basin or sink including brass check nut complete and carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty milimetres) nominal size) for the bedding for P.V.C./ stone ware pipes of 150mm (one hundred fifty milimetres) diameter with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying cement concrete 1:4:8 (One cement : four sand : eight graded stone aggregate 40mm (Forty milimetres) nominal size) bedding for PVC/ stone ware pipes of 100mm (one hundred milimetre) diameters with necessary form work and curing complete, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in trenches 20mm (Twenty milimetres) nominal bore ISI marked galvanized mild steel tubes (Medium grade) tube fittings of approved brand and manufacture (TATA/ JINDAL MAKE) complete (earth work in trenches to be measured and paid for separately), including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing C.I. sluice valve 100mm (One hundred milimetre) nominal size ( with hand wheel) as per IS:780-1984 class-I up to 300mm (Three hundred milimetres) diameter ( including brass spindle) and as per IS:2906-1984 class-II for diameters more than 300mm (Three hundred milimetres) diameter complete with bolts, nuts, rubber insertion etc. (The tail pieces if required shall be measured and paid for separately) including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and fixing cast iron cover manhole cover (light duty) single seal 455x610mm (Four hundred fifty five into six hundred ten milimetres) internal dimension the total weight of frame and cover to be not less than 38 kgs. (Thirty eight kilogrammes) (weight of frame 15 kgs. (Fifteen kilogrammes) and weight of cover 23 kgs. (Twenty three kilogramme) including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Construction of water collection chambers with R.C.C. top slab in cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) mix 100mm (One hundred milimetres) thick foundation concrete 1:2:4 (one cement : two sand : four graded stone aggregate 40mm (forty milimetres) nominal size) and inside plastering with cement mortar 1:3 (One cement : three sand) finished with a floating coat of neat cement including curing complete with 150mm (One hundred fifty milimetres) thick walls of R.C.C. 1:2:4 (one cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) complete with form work and reinforcement for reinforced cement concrete work with 6mm (Six milimetres) bars at not exceeding 150mm (One hundred fifty milimetres) centres both ways as per directions of Engineer-in-Charge, 600mmx600mmx 750mm (Six hundred milimetres into six hundred milimetres into seven hundred fifty milimetres) inside size, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana

Applying cement slurry on reinforced cement concrete slab or cement concrete work using 2.75 kg (two point seven five kilogrammes) of cement per square metre of floor area before laying cement concrete flooring including roughening cleaning of the concrete surface complete including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Constructing chamber for filter media with R.C.C. top slab 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) mix 100mm (One hundred milimetres) thick foundation concrete 1:5:10 (One cement : five sand : ten graded stone aggregate 40mm (Forty milimetres) nominal size) inside plastering with cement mortar 1:3 (One cement : three sand) including curing complete in side size 1200x1200x1500mm (One thousand two hundred into one thousand two hundred into one thousand five hundred milimetres) with 150mm (One hundred fifty milimetres) thick walls of reinforced cement concrete 1:2:4 (One cement : two sand : four graded stone aggregate 20mm (Twenty milimetres) nominal size) mix complete with form work and reinforcement for reinforcement cement concrete work with 6mm (Six milimetres) diameter mild steel bars at not exceeding 150mm (One hundred fifty milimetres) centres both ways or as per the directions of the Engineer-in-Charge, including carriage of materials within all leads, lifts and other incidental Charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government.

Providing and laying in horizontal layers filtering media dully graded, screened, washed and cleaned as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. (i) Ist layer bazri 20mm to 25mm (twenty milimetres to twenty five milimetres)

Providing and laying in horizontal layers filtering media dully graded, screened, washed and cleaned as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. (ii) Second layer coarse sand

Providing and laying in horizontal layers filtering media dully graded, screened, washed and cleaned as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. (iii) Third layer Bazri 6mm to 20mm (Six milimetres to twenty milimetres)

Providing and laying in horizontal layers filtering media dully graded, screened, washed and cleaned as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. (iv) Forth layer fine sand (effective size 0.20mm to 0.40mm (Zero point two zero milimetres to zero point four zero milimetres) and uniformity-Co-efficient 2.00 to 3.00 (Two to three)

Providing and laying in horizontal layers filtering media dully graded, screened, washed and cleaned as specified and as per the directions of the Engineer-in-Charge, including carriage of materials within all leads and lifts and other incidental charges. The rate includes, royality charges, octroi, GST, sale tax, malkana and all other taxes as imposed by the Government. (v) Bottom layer broken stone aggregates 50mm to 75mm (fifty milimetres to seventy five milimetres)

PAVNESH KUMAR

Purshotam Singh

raman kant sharma