PROVISION OF SCREEN WALL, TOUGHENED GLASS AND OTHER CERTAIN MINOR WORKS AND OUTDOOR GYM AND CHILDREN PARK AT CGDHQ-1 PORBANDAR UNDER GE I CG PORBANDAR

Amount

SCHEDULE 'A'

Excavating in trenches n exc 1.5 m wide & n exc 1.5 m depth and getting out in soft/loose soil. complete all as specified and directed

Excavation over areas. n.exc 1.5 m deep and getting out in soft/disintengrated rock complete all as specified and as directed

Excavating in trenches n exc 1.5 m wide & n exc 1.5 m depth and getting out in soft/disintegrated rock complete all as specified and as directed.

Surface excavation n.exc (not exceeding) 30cm deep and averaging 15 deep and getting out in soft/ loose soil complete all as specified and as directed

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/disintegrated rock complete all as specified and as directed.

Returning, filling in, including spreading, levelling, watering and well ramming in layers not exceeding 25cm as in soft/loose soil complete all as specified and as directed.

Removal of excavated soil exc. 1.5 Km but n.exc 5 Km and depositing where directed at level n exc. 1.5 M above the starting point complete all as specified and as directed

Removal of excavated rocks exc. 1.5 Km but n.exc 5 Km and depositing where directed at level n exc. 1.5M above the starting point complete all as specified and as directed

M&L for PCC 1:4:8 type D2 using 40mm graded stone aggregate as in foundation and mass concrete complete all as specified and directed.

M&L for PCC 1:2:4 type D2 using 40mm graded stone aggregate as in foundation and mass concrete for fixing of Equipement complete all as specified and directed.

M&L for broken stone or boulders Hardcore of gauge exc 63 mm but n exc. 100 mm, deposited, spread and levelled in layers n exc. 15 cm thick, watered and rolled/rammed to a true surface all as specified.

M&L for 100 mm thick Plain Cement concrete 1:4:8 type D-2, (using 40mm graded aggregate) as in sub base of floors complete all as specified and as directed

M & L for 50 mm thick Sand filling under floors or in foundation including watering and consolidation complete all as specified and as directed

M & L for 60 mm thick M-35 Grade Machine pressed precast concrete paver block of any colour any shape and size confirming to IS 15658-2006 with grey cement and pigment complete all as specified and as directed.

M&L for Polished granite stone slab 16 to 18 mm thick (table rubbed and polished) in steps, jambs, pillar, window cills, cooking platform and like in cement mortar 1:4 incl pointing in white cement 1:2 using marble dust with admixture pigment to match with shade of granite including moulding at front edge over screed bed of 15 mm thick 1:6 all as specified and as directed as in platforms complete all as specified and as directed Note : Quality of granite all as approved by GE .

M & L for Porbandar stone masonry, well bonded, bedded and solidly hearted built in CM 1:6 all as specified and as directed .

M&L for rendering 15 mm thick on fair face of brick work or concrete surfaces in CM 1:4 finished even and smooth wiithout using extra cement complete all as specified and as directed.

Material & Labour for new surface applying Two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

S&F Pre cast RCC Garden Bench without hand rest (03 Seaters) 1.Each bench consists of 2 Nos L-shape base support in grey cement color (thickness: 100mm, Back height: 1000mm, Front height 450mm and base width 620mm) and 5 Nos. Reinforced Concrete planks in color of size 1500mm x 100mm x 50mm and 1 no of Reinforced Concrete planks of size 1500mm x 200mm x 50mm, 2.Overall Dimension Seating lenght of the bench 1500mm, Seating height of the beanch 450mm, Total height of the bench 1000mm, Colour and Design Approved by GE. etc Competed as per Specifed and directed by Engr in Charge

M&L for preparation of New/old surfaces and applying granules textured homogeneous wall finishing system consisting of a two component system of dry granules (25 Kgs per pack) made of 92% silica particles coated with fade resistant pigments, 100% acrylic polymer bonding agent (5 Kgs per pack) with the applied thickness of the coating being between 0.8 mm-1.2mm to be applied on a cured, smooth level plaster without keying as per the shades/combinations approved as per the manufacturers instructions for usages, to be applied by and approved applicator of the manufacturer, as per the directions/supervision of the engineer-in-charge. all complete. The above textured coating should confirm to surface spread of flame class one of BS 476: Part 7: 1971 and pull off strength of the coating to meet JISA 6909 on smooth old plastered surface complete all as specified.

Material & Labour for old surface applying one or more coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of required shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm over new surfaces. all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

S & F for Chest Press Cum Shouder Press ( KFE - 15 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Leg Lift Post ( KFE - 11 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions,or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Big Shoulder Wheel ( KFE - 07 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions, or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Air waker Double ( KFE - 12 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions, or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Situp Bench Double ( KFE - 25 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approvedcomplete all as specified and directed by Engr-in-charge.

S & Ffor Leg Press Cum Pushup Bar ( KFE - 21 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Leg Extension ( KFE - 10 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approvedcomplete all as specified and directed by Engr-in-charge.

S & F for Cross Skier Double ( KFE - 19 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Rower ( KFE - 02 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Seated Twister Tripple ( KFE - 40 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Leg Press Double ( KFE - 20 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Arm Exerciser ( KFE - 29 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

S & F for Pushup Bar Doube ( KFE - 26 ) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions or equivalient make as approved complete all as specified and directed by Engr-in-charge.

NOTE: Above Srl item No 22 to 34 Mention KFE Series item Specification is provied : 1) Main pipe 100mm dia Galvanised pipe. Make : Jindal 2) Handle & leg pipe - 32 & 25NB 3) Seat rest , foot rest , back rest are of galvanised sheet having wall thickness of 2MM 4) Bearing use in KCI & ARB 5) HANDLE GRIP USE IN RUBBER MATERIAL 6)Provide nylon cap for safety & all pipe end cap material in plastic 7) Powdercoating of 60-70micron.

S & F for Multi Play Station (Roof as per approved by GE) Machine incuding Fixing in PCC plateform with grouting or anchering system etc all as per the manufacturers instructions, complete all as specified and directed by Engr-in-charge.

NOTE: For Above Srl item No 36 Multi Pay Station item Specification is provied below: 1.Roto Moulded LLDPE Roofs are produced from UV stabilised virgin material. 2.Roto Moulded LLDPE Slides are produced from UV stabilised virgin material. 3.Roto Moulded LLDPE Decorations are produced from UV stabilised virgin material. 4.Powder Coated / Lead free PU Paint is done on Platforms which is made of Galvanised Sheet with precision punched hole of 10mm. 5.28mm Galvanised pipe are used for Platform & Ladder Railing with further treatment of powder caoting/Lead free PU Paint. 6.89mm Galvanised post are used as structure post with further treatment of powder coating/Lead free PU Paint. 7.Handrails of stairs are made of Galvanised pipe with further treatment of powder coating / Lead free PU Paint. 8.Roto Moulded LLDPE Panels are produced from UV stabilised virgin material. 9.Slide Entry Gate Panels are used for children safety so that they dont fall down. 10.Nylon clamps are used for proper installation of all panels. 11.All nuts will be covered with NYLON CAPS. 12.Powder Coated / Lead free PU Paint is done on Ladder which is made of Galvanised sheet with Triangle steps. 13.76.8mm Galvanised pipe are used for Swing structure post with further treatment of powder coating/Lead free PU Paint,Durable rubber flap with triangular hook & PVC Coated chains for the safety of hands. 14.Platform Sizes used in this MPS-Square platform 1150 X 1150 X 85MM.

M&L for cement concrete (1:2:4), type B-1, using 20mm graded mechanically crushed stone aggregate as in coping, bed block benching, kerbs, mud stop, rounded or chamferred on edges including necessary form work/moulds complete all as specified and as directed.

M&L 40 mm thick (measured solid) ready made reinforced precast cement concrete type B0 (1:2:4, 12.5 mm graded stone aggregate) louvres and jallies, set in CM 1:4, including all mouldings complete including colour all as specified and as directed by Engr-in-Charge. Note : Contractors are advised to visit the samples held in the office, before submitting tender.

M&L for approved fertile earth filling in floors or pavings, suitable for plantation incl watering maneovering of earth complete all as specified and directed.

Supplying and Planting( dibbling) of high quality natural green carpet grass of approved quality at uniform spacing including levelling the land perfect , making the leveled soil free from debris, weeds, seeds, mixing it with base fertilizer and watering once complete all as specified and as directed by Engr-in -charge.

S& F of 2 mm thick Linoleum plain coloured,sealed with an approved adhesive in floors including stretching, cutting and fitting complete all as specified and directed.

M&L for Pre-cast RCC 1:2:4 type B1 (using 20mm graded aggregate) as in cover slabs set in cement Mortar 1:4 and finished all exposed surfaces of concrete even and fair without using extra cement including form work etc completed all as specified and as directed by Engr in Charge.

M&L for Mild steel TMT CRS bars 6 to 8 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire annealed not less than 0.9mm dia or securing with clips.

S&F Ready made ornamental Precast reinforced cement concrete type B0 1:2:4 (12.5 mm graded aggregate) designer pillars (Size- 100 x 100 ) height up to 1500 mm having groove on two faces, for fixing louvres and jallies, set in CM 1:4 on compound wall. incuding colour all as approved and as directed by Engr-in-Charge. Note : The design of pillar, shall be got approved before bulk procurement . The tenders are advised to visit the site for sample.

M&L for 18 mm thick Marine plywood, grade BWP, type BB fixed with screws to timber frame work etc complete as directed by engineer In Charge.

M&L for 0.9 mm thick decorative laminate type 1 of surface finish, colour and patters as approved, fixed with approved adhesive as per manufacturer's insturctions, complete all as specified and as directed .

S&F for Aluminium Composite panels in all colours of approved brand for external / internal wall cladding at all heights and elevations including necessary aluminium composite panel consist of 3mm thermoplastic core of anti oxidant LDPE sandwitched between two sking of 0.5mm thick alloy sheet making a total sheet thickness of 4mm. The surface shall be finished with PDVF base coating on the top side and service coating on the reverse side shall be with a polymer paint. The system to be fixed to the brick/ stone/ masonry/RCC walls/framed structure with necessaary clamps, bracket and anchor fasteners fixed over and including base frame fabricated with aluminium square pipe of size 40mm x 20mm with 1mm thickness in 600mm x 600mm size of grid including stainless steel screws, nut bolts, washers, cleats, weather silicon sealent for groove filling, backer rods etc, complete all as per manufacturer instrsuction and all as specified and as directed by Engr-in-Charge. All clamps and brackets shall be hot deep galvanised minimum 20 microns, (items include cost of aluminium frame, ACP Panels, Cramps, weather sealant, gasket, foam, fixtures, scaffolding, all machineries and any fastening strips, nuts, bolts, rivets, washers, etc complete). Make of ACP : ALUPEX/ALUDECOR/ALSTRONG/TM

S&F of 12 mm thick Toughned Glass Door with patch fittings with cover plate of SS316 Grade including Decorative type Stainless steel 304 grade floor Spring, fixing/moving arrangement at top, Stainless steel 2 Nos H Type Handles of 450 MM suitable size as directed, Fin Connect Patch Lock etc in each door, including cutting holes in any size in floor and wall complete all as specified and as directed by Engineer-in-Charge.

S&F of 12 mm thick Toughned Glass as in Partition /window with patch fittings of SS316 Grade, necessay accessories etc, including cutting holes in any size in floor and wall,and sealing joint with sealing compound complete all as specified and as directed by Engr-in-Charge

S&F of solar control film 25 micron reflective type sticked to glass panes as per instructions of manufacturer complete all as specified and as directed by Engr-in-Charge

Supply & fix Water heater storage type, electric, capacity 25 ltrs, BEE 5 star rated with hot and cold PVC pipe complete all as specified and directed. Make: Racold or equivalent in AO Smith/Jaguar

M&L for Point wiring complete with 2.5 sqmm single core PVC insulated but unsheathed multistranded copper conductor FRLS cable 650/1100 Volts grade drawn through and including non metallic rigid PVC heavy duty concealed conduit (minimum 20 mm dia external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR part- I ISI marked with wall thickness not less than 1.8 mm including conduit accessories like bends, tees, junction boxes etc fixed concealed/ recessed in wall or ceiling etc including 1.5 sqmm PVC insulated but unsheathed multistranded copper conductor FRLS cable as earth continuity wire including modular type metal flush box with cover plate and frame for modular switches, sockets, switch sockets for one 3 pin 15 or 16 Amps on independent board with required modules all as specified. insulated but unsheathed multistrand copper conductor FRLS cabel 650/1100 Volts grade conforming to IS-694 drawn through PVC conduit (minimum 20 mm dia (external) but shall be increased as per actual site requirement in accordance with clause 19.125 of SSR Part I) ISI marked with wall thickness not less than 1.8 mm heavy duty including conduit accessories concealed pressed steel terminal boxes of size cover white/coloured including 1.5 Sqmm PVC insulated but unsheathed copper conductor FRLS cable as earth continuity wire for one 3 pin 15 or 16 Amps socket outlet on independent board as specified. Note for item no 1/2 :- Cost of cutting / chasing on wall and making good after repair deemed to be included in unit Rate

S & F of Bib tap standard chrome of size 15mm with high pressure screwed for CPVC pipe and fixed complete all as specified and directed. Make: Jaguar

S & F of angle cock standard chrome of size 15mm with high pressure screwed for CPVC pipe and fixed complete all as specified and directed. Make: Jaguar

Supplying and laying of CPVC pipes of size 25mm SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed

Supplying and laying of CPVC pipes of size 16mm SDR 11 & Plain CPVC SDR 11 fittings in trenches complete all as specified and directed

Supply & fix CPVC ball valve of size 25 mm complete all as specified and as directed.

Supply & fix modular switch 1 way, 16 Amps, 1 modular (ISI marked).complete all as specified and as directed.

Supply & fix modular socket, 6/16 Amps, 2/3 pin combind 2 module (ISI marked).complete all as specified and as directed.

fakhrie apostrical

AADESH CONSTRUCTION

Nitesh Enterprise

V D JADEJA

K B N TRADERS

K K Construction Co

JAMNAGAR ELECTRIC AND MACHINERY CO