MAINTENANCE AND REPAIRS TO SREEKRISHNA TEMPLE FOR THE YEAR 2024-2025

Amount

MAINTENANCE TO SREEKRISHNA TEMPLE

od379722/2023_2024 : Cleaning the Gold plated Sreekovil roof , door and of Lord Guruvayoorappan Namaskara Mandapam roof using cleaning powder , white washing the Sreekovil walls(one time) for Uthsavam 2025 , cleaning giving necessary oil treatment(15 Ltr) for wooden ceilings in Sreekovil and Namaskara Mandapam (including dhakshina vazhi for keezhsanthi's)

od16856/2024_2025 : Cleaning the Kodimaram using brush , cleaning powder including scaffolding charges before Uthsavam (including dhakshina for keezhsanti)

od379724/2023_2024 : Cleaning and painting Ayyappa temple Sreekovil (including dhakshina for keezhshanthi's)

od379725/2023_2024 : Supplying and fixing trolley wheels for replacing damaged wheels of trolleys. Nylon wheel with bearing (8"x 2")-Fixed wheel

od379726/2023_2024 : Supplying and fixing trolley wheels for replacing damaged wheels of trolleys. Nylon wheel with bearing (8"x 2"). Swivel wheel

od379727/2023_2024 : Supplying and fixing trolley wheels for replacing damaged wheels of trolleys. Nylon wheel with bearing (6"x 2")-Fixed wheel

od379728/2023_2024 : Supplying and fixing trolley wheels for replacing damaged wheels of trolleys. Nylon wheel with bearing (6"x 2";) Swivel wheel

od379729/2023_2024 : Supplying nylon wheel

15.2.1 : Demolishing cement concrete manually / by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in-Charge.Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix)

15.7.4 : Demolishing brick work manually / by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-Charge.In cement mortar

15.23.2 : Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles above 25 mm and up to 40 mm

4.1.8 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size)

5.1.2 : Providing and laying in position specified grade of reinforced cement concrete, excluding the cost of centering, shuttering, finishing and reinforcement - All work up to plinth level:1:1:5:3 (1 cement 1.5 coarse sand :3 graded stone aggregate 20 mm nominal size

5.2.2 : Reinforced cement concrete work in walls (any thickness), including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc. up tot floor five level excluding cost of centering, shuttering, finishing and reinforcement :1:1.5:3( 1 cement : 1.5 coarse sand : 3 graded stone aggregate 20 mm nominal size)

5.9.2 : Centering and shuttering including strutting, etc. and removal of form for:Walls (any thickness) including attached pilasters, butteresses, plinth and string courses etc.

5.9.1 : Centering and shuttering including strutting, etc. and removal of form for:Foundations, footings, bases of columns, etc for mass concrete

5.22.6 : Steel reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete upto plinth levelThermo - Mechanically Treated bars of grade Fe-500D or more

4.1.3 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level:1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size)

13.1.1 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand)

13.7.2 : 12 mm cement plaster finished with a floating coat of neat cement of mix:1:4 ( 1 cement : 4 fine sand)

od379730/2023_2024 : Remove all damaged concrete from the structure by only gentle tapping of the surface. Thus expose the corroded reinforcing bars. The clean the exposed bars with emery ribbon, paper, water etc. Remove all the corroded bar which have corroded more than 40% of its original diameter with new one of same diameter. On the cleaned bars apply corrosion inhibitor double component zinc rich NITOZINC PRIMER to form a continuous film. Then apply bonding agent NITOBOND SBR around reinforcing bars and on the acidic concrete surface only. Reinstate this surface using high early strength developing chemicals resistant, low density RENDROC HB2 only around the bars. Make the overall damaged surface plain and smooth with modified polymer mortar.

11.41.1 : Providing and laying vitrified floor tiles in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS : 15622, of approved make, in all colours and shades, laid on 20 mm thick cement mortar 1:4(1 cement : 4 coarse sand), including grouting the joints with white cement and matching pigments etc., complete.Size of Tile 500x500 mm.

od379731/2023_2024 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and ointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge : Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. (Time restricted area)

11.55.1 : Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-in-Charge :Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent.

8.9.1.2 : Stone tile (polished) work for wall lining over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and cement slurry @ 3.3 kg/sqm including pointing in white cement complete.Granite of any colour and shade

8.31 : Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineerin-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete.

50.9.1.1 : Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately), using good quality Anjili wood /jack wood

od379732/2023_2024 : Flush pointing ashlar masonry with cement mortar 1:2

13.111.2 : Finishing walls with Acrylic Smooth exterior paint of required shade :Old work (One or more coat applied @ 0.90 ltr/10 sqm).

14.72 : Providing and fixing double scaffolding system (cup lock type) on the exterior side, upto seven story hight made with 40 mm dia. M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staricase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required location with essential safety features for the workmen etc. complete as per directions and approval of Engineer- in Charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note:- This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done .

13.98.1 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade:One or more coats on old work

13.113.1 : Varnishing with varnish of approved brand and manufacture:One or more coats with copal varnish

od379733/2023_2024 : Wall painting with plastic emulsion paint of approved brand and manufacture to give an even shade: One or more coats on old work (restricted area).

13.99.1 : Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade :One or more coats on old work

13.61.1 : Painting with synthetic enamel paint of approved brand and manufacture to give an even shade:Two or more coats on new work

od379734/2023_2024 : Painting with superior quality metal emulsion paint (copper) on existing copper sheet roofing surface. One or more coats on old work

od379736/2023_2024 : Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level: 1:2:4 (cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) - time restricted area

od379737/2023_2024 : Brick work with common burnt clay modular bricks of class designation 7.5 in foundation and plinth in: Cement Mortar 1:6 (1 cement : 6 coarse sand) (Time restricted area)

50.6.1.4 : Solid block masonry using pre cast solid blocks (Factory made) of size 30x20x20cm or nearest available size confirming to IS 2185 part I of 1979 for foundation and plinth with thickness 20cm and above in: CM 1:6 ( 1 cement : 6 coarse sand ) etc complete

od379738/2023_2024 : 12 mm cement plaster of mix:1:4 ( 1 cement : 4 fine sand) (Time restricted area)

50.13.1 : 9 mm cement plastering of mix : 1:3 (1 cement : 3 fine sand ) including all cost of materials, labour charges etc complete

14.6.1 : Renewing glass panes, with wooden fillets wherever necessary:Float glass panes of thickness 4 mm

od379739/2023_2024 : Supplying Common burnt clay F.P.S. (non modular) bricks class designation 7.5

od379740/2023_2024 : Supplying Clean red earth (Puttumannu) for preparation of Homakundam Kalasam 2025

od379741/2023_2024 : Supplying Solid blocks of size 30x20x20cm

od379742/2023_2024 : Supplying Coarse sand (zone III)

od379743/2023_2024 : Supplying Stone dust

od379744/2023_2024 : Lettering with synthetic enamel paint of approved brand and manufacture. 1cm height

od379745/2023_2024 : Core cutting on granite floor inside temple including all labour and machinery charges etc, complete.

18.51.1 : Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.15 mm nominal bore

50.18.9.19.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 110 m dia 4 Kgf/cm2 - External work - Exposed on wall

50.18.9.18.1 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 75 mm dia 6Kgf/cm2 - External work- Exposed on wall

50.18.9.17.2 : Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints complete as per direction of Engineer-in-Charge 63 mm dia 4 Kgf/cm2- External work - exposed on wall

50.18.9.20.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement - 63 mm dia Bend

50.18.9.22.4 : Providing and fixing PVC moulded fittings/ accessories for Rigid PVC pipes, including jointing with PVC solvent cement- 110 mm dia Bend

od21482/2024_2025 : Supplying flexible hose 75mm dia including GI coupling and hose clip etc, complete

od21499/2024_2025 : Supplying 25mm dia flexible hose

od21693/2024_2025 : Supplying good quality 13mm PVC tap.

od379746/2023_2024 : Labour engaged as Coolie

od379747/2023_2024 : Labour engaged for necessary carpentary works

od379748/2023_2024 : Labour engaged as Fitter(grade1)

od379749/2023_2024 : Labour engaged as Blacksmith 1st class

od379750/2023_2024 : Providing stain cloth curtain for front stage curtain per size 8.00x 3.60 m with necessary boarder fleets and side top cotton boarder cloth with hooks ropes as per existing patterns and style etc complete.

od379751/2023_2024 : Providing cotton cloth side curtain per size 2.00x 3.00 m with hooks , ropes as per existing patterns etc complete.

od379752/2023_2024 : Providing cotton cloth back curtain per size 8.00x 3.00 m with hooks ,ropes as per existing patterns etc complete.

od379753/2023_2024 : Supplying and fixing coir mat S.K-1 of Red bleech of good quality, conveying to site, fixing to frame with steel wires,clamps,screws etc. including all materials and labour charges after removing the old coir mat.

od379754/2023_2024 : Providing cotton board/banner without frames showing various informations in connection with Uthsavam etc.

od379755/2023_2024 : Providing cloth board with frames showing Kalasam details and Uthsavam informations etc.

od379756/2023_2024 : Supplying Red carpet

10.1 : Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

10.2 : Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

9.48.1 : Providing and fixing M.S. Grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete.Fixed to steel windows by welding

50.10.1 : Steel work in built up G I tubular ( round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting,fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

50.10.2 : Steel work for purlin/single section with G I pipes including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete

10.28 : Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)

od21392/2024_2025 : Providing and fixing Stainless steel grills of required pattern in frames of windows etc.with S.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding

21.1.1.2 : Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS : 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminnium snap beading for glazing /paneling, C.P. brass/ stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge.(Glazing, paneling and dash fasteners to be paid for separately):For fixed portionPowder coated aluminium (minimum thickness of powder coating 50 micron)

21.1.2.2 : For shutters of doors, windows & ventilators including providing and fixing hinges / pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately)Powder coated aluminium (minimum thickness of powder coating 50 micron)

9.135.2 : Providing and fixing fly proof stainless steel grade 304 wire gauge, to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.50 mm all complete.With 12 mm mild steel U beading

9.156.1 : Providing and fixing Pre-laminated medium density fibre board exterior grade (Grade-I) IS:14587:1998 marked, to backing or studding with screws etc. complete (Frames, backing or studding to be paid separately).Pre-laminated with decorative lamination on both side exterior Grade -I MDF Board 12 mm thick confirming to IS:14587.

od379757/2023_2024 : Providing and fixing 710 BWP Marine plywood or equivalent make paneling 19 mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

od379758/2023_2024 : Providing and fixing ACP 4mm thick panelling , to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

od22001/2024_2025 : Providing and fixing Hylum sheet 4mm thick , to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge

od379759/2023_2024 : Supplying pvc net

od379760/2023_2024 : Supplying and fixing good quality garden screening net using pvc tying wire

od379761/2023_2024 : Supplying 8mm chequered plate for covering drain

od379762/2023_2024 : Supplying and fixing tarpaulin as per the direction of Engineer in charge

12.50 : Providing and fixing precoated galvanised iron profile sheets (size, shape and pitch of corrugation as approved by Engineer-in-charge) 0.50 mm (+0.05%), total coated thickness with zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns. Sheet should have protective guard film of 25 microns minimum to avoid scratches during transportation and should be supplied in single length upto 12 metre or as desired by Engineer-in-charge. The sheet shall be fixed using self drilling/self tapping screws of size (5.5x55mm) with EPDM seal, complete upto any pitch in horizontal/ vertical or curved surfaces, excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.

12.51.1 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+ 0.05%) total coated thickness, zinc coating 120 grams per sqm as per IS:mm(+0.05%) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws complete:Ridges plain (500-600 mm)

od21399/2024_2025 : Supply and application of low viscous epoxy injection resin grout system is a solvent free non pigmented two component system based on liquid epoxy resin with a special hardener. To get little more thick solution and to match the color of Copper plate, we will be mixing copper silica powder and filling these gaps and sealing with the solution cleaning etc on the edge of the every 6" copper plate with @ 5mm width complete area (This material is not contain any animal fat or any other alcoholic products, it is purely a green and hygienic and environment friendly material)

od21405/2024_2025 : Supply and application of low viscous epoxy injection resin grout system is a solvent free non pigmented two component system based on liquid epoxy resin with a special hardener. To get little more thick solution and to match the color of Copper plate, we will be mixing copper silica powder and filling these gaps and sealing with the solution cleaning etc. complete (This material is not contain any animal fat or any other alcoholic products, it is purely a green and hygienic and environment friendly material)

od379763/2023_2024 : Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+0.05 %) total coated thickness, Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/ self tapping screws complete : Gutter (900 mm over all girth)

od379764/2023_2024 : Laying of granite stone floor using new granite stone of 15cm thick with palmuna finished top over a bed of Coarse.sand of 15cm thick , pointing with cement mortar 1:3 and joints filled with cement grout, etc.complete

od379765/2023_2024 : Laying of granite stone floor using departmental granite stone of 15cm thick 'with palmunafinished top over a bed of 15cm thick Coarse sand, pointing with cement mortar 1:3 and joints filled with cement grout, etc.complete

od379766/2023_2024 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50 mm thick compacted bed of 6mm stone aggregate, filling the joints with fine sand etc. all complete as per the direction of Engineer-in-charge. using departmental material

od379767/2023_2024 : Providing and laying 60 mm thick factory made cement concrete interlocking paver block of M - 30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and including 50 mm thick compacted bed of 6mm stone aggregate, filling the joints with fine sand ,etc all complete as per the direction of Engineer-in-charge.

od379768/2023_2024 : Providing Pulmuna finish by manually by using appropriate chisel and hammer for roughing the existing slippery surface of the granite top.

od18798/2024_2025 : Providing and fixing V board or equivalent make paneling 8mm thick, to frame, backing or studding with screws etc. complete ( Frames, backing or studding to be paid separately) as per the direction of site Engineer-in-charge.

9.119 : Providing and fixing factory made P.V.C. door frame of size 50x47 mm with a wall thickness of 5 mm, made out of extruded 5 mm rigid PVC foam sheet, mitred at corners and joined with 2 Nos. of 150 mm long brackets of 15x15 mm M.S. square tube, the vertical door frame profiles to be reinforced with 19x19 mm M.S. square tube of 19 gauge, EPDM rubber gasket weather seal to be provided through out the frame. The door fame to be fixed to the wall using M.S. screws of 65/100 mm size, complete as per manufacturer's specification and direction of Engineer-in Charge.

9.120.1 : Providing and fixing factory made panel PVC door shutter consisting of frame made out of M.S. tubes of 19 gauge thickness and sized of 19 mm x 19 mm for styles and 15x15 mm for top & bottom rails. M.S. frame shall have a coat of steel primers of approved make and manufacture. M.S. frame covered with 5 mm thick heat moulded PVC 'C' channel of size 30 mm thickness, 70 mm width out of whicj 50 mm shall be flat and 20 mm shall be tapered in 45 degree angle on both side forming styles and 5mm thick, 95 mm wide PVC sheet out of which75 mm shall be tapered in 45 degree on th inner side to form top and bottom rail and 115 mm wide PVC sheet out of which 75 mm shall be flat and 20 mm shall be tapered on both sides to form lock rail. Top, bottom and lock rails shall be provided both side of the panel. 10 mm (5 mmx2) thick, 20 mm wide cross PVC sheet be provided as gap insert for top rail & bottom rail. paneling of 5 mm thick both side PVC sheet to be fitted in the M.S. frame welded /sealed to the styles & rails with 7 mm (5 mm + 2 mm ) thick x 15 mm wide PVC sheet beading on inner side, and joined together with solvent cement adhesive. An additional 5 mm thick PVC strip of 20 mm width is to be stuck on the interior side of the 'C' Channel using PVC solvent adhesive etc. complete as per direction of Engineer -in-charge, manufacture's specification & drawing.30 mm thick plain PVC door shutters

od18749/2024_2025 : Supplying and fixing U PVC corrugated rainwater harvesting trapezoidal shape gutter 3.2mm thickness of bottom width 160mm and top width 320mm and having depth 220mm including end cap, center joint with center and end d r o p s supporting with u PVC bracket covering with 32x6mm flat (1m extended width length) including painting and fixing the flat in position, etc complete

9.84 : Providing and fixing aluminium extruded section body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 36 kg to 80 kg and door width form 701 mm to 1000 mm), with double speed adjustment with necessary accessories and screws etc. complete.

9.70.2 : Providing and fixing IS : 12817 marked stainless steel butt hinges with stainless steel screws etc. complete:100x58x1.90 mm

9.97.2 : Providing and fixing aluminium tower bolts, ISI marked, anodised(anodic coating not less than grade AC 10 as per : 1868), transparent or dyed to required colour or shade, with necessary screws complete:250x10 mm

od379769/2023_2024 : Providing and fixing uPVC gutter of size 200mm dia with necessary fittings and labour charges etc complete.

od379770/2023_2024 : Providing and fixing uPVC gutter of size 150mm dia with necessary fittings and labour charges etc complete.

od379771/2023_2024 : Hire and running charges of crane 20 tonne capacity

od379772/2023_2024 : Supplying Front end loader 1 cum bucket capacity

50.2.3.1 : Pumping or Bailing out water and removing slush etc by using pump set including cost of labour, oil hire charges of pumpset, etc complete

od21989/2024_2025 : Supplying and fixing aluminium turbine ventilator for having 24" neck dia and turbine dia 26" and height as 16" (410mm) with centre shift and inner areas with stainless steel material with bolting etc complete

gopis

Bidder Name

Smitha Ratheendradas

gopis