Design Soil Testing Construction of 0.30MGD RSFP Clear water Sump Balance work for intake channel Sump Cum Pump House and Design Construction of 0.58 Lacs gallons OHT and other allied works and electro mechanical components for WSS Seer Jagir

Amount

Civil: Earth work in excavation by manual means over areas (exceeding 30cm and up[to 1.5mtr in depth, 1.5mtr in width as well as 10 sqm on plan) including disposal of excavated earth upto 1mtr from cutting edge disposal earth to be levelled and neatly dressed . All kinds of soil

Extra for every additional lift of 1.5 mtr. or part thereof in all kinds of soil.

Providing and laying stone soling hand packed horzintally on level incld. all carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centring and shuttering. All work upto plinth level. 1 : 4 : 8 (1 cement : 4 coarse sand : 8 graded stone agg. 20mm nominal size) Crushed incld. all carriages

Providing and laying in position specified grade of reinforced cement concrete excluding the cost of centering, shuttering, finishing and reinforcement. All work upto plinth level. 1 : 1.5 : 3 (1 cement ; 1.5 coarse sand : 3 graded stone agg. 20mm nominal size). incld. all carriages

Reinforced cement concrete work in walls (any thickness) including attached pilasters, buttresses, plinth and string courses, fillets, columns, pillars, piers, abutments, posts and struts etc upto floor five level excluding cost of centering, shuttering finishing and reinforcement 1 : 1.5 : 3 ( 1 cement : 1.5 coarse sand : 3 graded crushed stone aggregate 20mm nominal size). incld. all carriages

Reinforced cement concrete work in beams, suspended floors, roofs having slope upto 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases upto floor five level excluding the cost of centering, shuttering, finishing and reinforcement with 1 : 1.5 : 3 ( 1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) incld. all carriages

Providing and laying in position machine batched and machine mixed design mix M25 grade cement concerete for reinforced cement concrete work using cement concrete content as per approved design mix including pumping of concrete to site of laying but excluding cost centring shuttering finishing and reinforcement incld. admixtures in recommended proportions as per IS 9103 to accelerate retard setting of concrete work improve work abality without imparing strength and durability as per directions of incharge incld. carriages all work above plinth level upto floor five level.

Providing and laying in position machine batched and machine mixed design mix M25 grade cement concerete for reinforced cement concrete work using cement concrete content as per approved design mix including pumping of concrete to site of laying but excluding cost centring shuttering finishing and reinforcement incld. admixtures in recommended proportions as per IS 9103 to accelerate retard setting of concrete work in walls (any thickness) core wall, cylindrical wall, dome (water retaining part) M25 incld. all carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone) aggregate 20mm nominal size Crushed.incld carriage

Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering. All work upto plinth level 1 : 3 :6 (1 cement : 3 coarse sand : 6 graded stone) aggregate 20mm nominal size Crushed.incld carriage

Reinforcement for R.C.C work including straightening, cutting, bending, placing in position and binding all complete (T.M.T bars) incld. all carriages

Centering and shuttering including straightening propping etc, and removal of form work for: Foundations, footing, bases of columns etc for mass concrete

Centering and shuttering including straightening propping etc, and removal of form work for: Walls (any thickness) including attached pilasters, buttresses, plinth and string courses

Centering and shuttering including straightening propping etc, and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Centering and shuttering including straightening propping etc, and removal of form work for:Suspended floors, roofs, landings, balconies and access plate form

Centering and shuttering including straightening propping etc, and removal of form work for: Lintels, beams, plinth beams, girders, bressumers and cantilevers

Brick work with coomon burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in: Cement mortar 1 : 4 (1 cement : 4 coarse sand) incld. extra above plinth level & all carraiges

12mm cement plaster finished with a floating coat of neat cement of mix : 1 : 3 (1cement : 3 fine sand)

15mm thick cement on the rough side of single of half brick wall of mix : 1 : 6 (1 cement : 6 fine sand)

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complte. Riveted and bolted

Structural steel work in single section fixed without connecting plate including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete.

Providing and fixing hand rail of approved size by welding etc to steel ladder railing, balcony railing and stair case railing and similar work including applying a priming coat of approved steel primer. M.S tube (medium) 40mm nominal bore

Providing corrugated G.S sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface) excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.0.63 mm thick

Providing coloured ridges or hips of width 60cm over all width plain G.S sheets with polymer coated J or L hooks, bolts and nuts 80mm dia G.I limpet and bitumen washers complete job

Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length (hold fast lugs or with dash fasteners shall be paid for separately): second class kail wood

Providing and fixing paneled or paneled and glazed shutters for doors, windows and clerestory windows including ISI marked M.S pressed Butt hinges bright finished of required size with necessary screws excluding paneling which will be paid for separately, all complete as per direction of Engineer incharge. second class kail wood

Providing and fixing 35mm thick wire gauze shutters using galvanized M.S wire gauze of average width for aperture 1.4mm in both direction with wire of dia 0.63mm for doors, windows and clerestory windows with hinges and necessary screws. ISI marked M.S pressed bright finished butt hinges with necessary screws of required size. second class kail wood

Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like

Cement concrete flooring 1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded stone agg.) finished with a floating coat of neat cement including cement slurry, but excluding the cost of nosing of steps etc complete. 50mm thick with 20mm nominal size stone agg. Crushed

Providing and laying earth filled E.C bags for construction of ring bund on wullar lake site during exceution for diversion of flow of water, the job includes earth work in excavation, filling of E.C bags with earth/sand placing of earth filled bags in portion under water head load of E.C bags incld. all leads and lifts complete job.

Distempering with Ist quality acrylic distemper, having VOC (Volatile Organic Compound) content less than 50grams/liter, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. One coat

Applying priming coat: with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood)

Painting with oil type wood preservative of approved brand and manufacture on New work (two or more coats)

Painting with synthetic enamel paint of approved brand and manufacture to give and even shade.Two or more coats on new work

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 150 x 10mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 100 x 10mm

Providing and fixing aluminum tower bolts ISI marked anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc complete 250 x 10mm

Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundation etc layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering lead upto 50m and lift upto 1.5m

Providing and fixing of water proofing material in cement concrete work in doses by weight of cement as per manufactures specification 1kg of water proofing material in 50kg of cemen

Providing and fixing of P.G.I sheets at construction joints including all carriages 0.63 thickness complete

Providing and fixing of 250x20mm wooden eves boarding of 2nd class kail wood

Providing and fixing of soffit boarding ornamental complete job

Marble stone flooring with 16mm (average) thick marble stone (sample of marble shall be approved by Engineer incharge) over 20mm (average) thick base of cement mortar 1 : 4 (1 cement : 4 coarse sand) laid and jointed with cement slurry including rubbing and polishing complete with. Makrana white second quality

Finishing walls with water proofing cement paint of approved brand and manufactured of required shade to give an even shade new work(two or more coats) applied @3.84kg/10sqm

Providing and applying white cement based putty of specified thickness, of approved brand and manufacture, over the plastered wall surface to prpare the surface even and smooth complete. 2mm thick

Supply and Installation of PVC tees for under drainage system including testing and commissioning of system of size 75mm

Providing and laying 75mm PVC pipe for under drainage system including testing and commissioning of system

Providing and laying of filter media in layers of approved size with filter gravel and filter sand of nominal size and texure in stratified layers including all carriages upto site of work

Providing and fixing of tie bolts, spring coil in wall shuttering (12mm dia and 100mm length)

Providing and laying upto floor V level reinforced cement concrete in kerbs, steps and the like including curing but excluding the cost of centring, shuttering, finishing and reinforcement with. 1 : 1 1/2 : 3 (1 cement : 1 1/2 coarse sand : 3 graded stone aggregate 20mm nominal size) incld. all carriages

Providing and fixing of curtain rods of 1.25mm thick chromium plated brass brackets fixed with C.P screws.

Providing and fixing water closet squatting pan (Indian type W.C pan) with 100mm sand cast iron P or S trap, 10litre low level PVC flushing cistern including flush pipe (of approved make) manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. Long pan pattern white vitreous china W.C pan of size 580mm

Providing and fixing of kitchen sink incld. all carriages of size 600x450x200mm

Providing and fixing of 100mm dia PVC vent pipe incld. all carriages

Providing and fixing of 75mm dia PVC vent pipe incld. all carriages

Providing and fixing of wash basin with C.I/MS brackets, 15mm C.P Brass pillar tapes, 32mm C.P waste pipe of standard pattern, white vitreous china wash basin size 550 x 400mm. Complete

Providing and fixing of G.I inlet connection for flush pipe connecting with W.C pan complete

Providing and fixing of 100mm sand cost iron grating for gully, gloor or Nehavi trap complete of size 32mm

Providing/fixing of 600x450mm beveled edge mirror of superior glass of approved quality including 6mm thick hard board and brass screws complete

Providing, fixing of bend of requied degree with access door , insertion rubber washer 3mm thick complete job

Providing and fixing 1mm thick M.S Sheet door with frame of 40 x 40 x 6mm angle iron and 3mm M.S, gusset plates at the junctions and corners, all necessary fittings complete, including applying coat of approved steel primer. Using M.s angles 40 x 40 x 6mm for diagonal braces.

Providing, fixing of brass bib cock of approved quality 15mm bore complete job

Providing, fixing of stop cock of approved quality complete job

Providing, fixing of 50 litre capacity geyser of approved make including installation fixing complete job

Providing and fixing of brass C.P fitting mixer with all etc complete job

Providing and fixing of electric service line 7/16

Providing and fixing of electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s, switches, switch boards, ceiling roses reputed make ISI mark screws, casing/conduit material of all sorts of carriage and labour charges required for the job. Heating points

Providing and fixing of electrical points (heating and lighting) incld. cost of wire switches, necessary MCB’s, switches, switch boards, ceiling roses reputed make ISI mark screws, casing/conduit material of all sorts of carriage and labour charges required for the job. Lighting points

Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes incld. fittings (500 litres each)

Reinforced cement concrete work in arches, archibs, domes, vaults, shells, folded plate and roofs having slope more than 15º upto floor five level incld. curing but excld. The cost of centring, shuttering finishing and reinforcement with 1 cement : 1.5 coarse sand : 3 graded stone agg.) 20mm nominal size incld. all carriages

Centering and shuttering including straightening propping etc, and removal of form work for: Arches, domes valuts upto 6m span

Providing and fixing of lightening copper conductor of approved quality and make with 0.60 x 0.60 mtr 12mm thick copper plate Complete job

Providing and fixing of level indicator of approved quality and manufacture Complete job

Providing, fixing including raising of G.I pipes for rising mains, supply mains etc with flanged joints including all carriages. 100mm G.I pipe

Providing, fixing including raising of G.I pipes for rising mains, supply mains etc with flanged joints including all carriages. 150mm G.I pipe

Providing and fixing of double flanged C.I sluice valve with extension rods upto working plateform conforming to I.S 780 of 1984 standard make kirlosker PNI type incl. cost of nuts, bolts, R.I cloth all sorts of carriages upto site of work, cost of tail pieces all leads etc complete job.100mm dia

Electrical and Mechanical Components: Providing and fixing of air blower capable of providing compression @ 4.80cm @ 0.35kg per sm with suitable 3-phase induction electric motor kirlosker/crompton greaves make, air check valve, non-return valve etc with stand by arrangements complete job

providing and fixing of mechanical equipment for bleaching Tank with electrically driven paddle assembly fitted with suitable reduction gear coupled with 3-phase electric motor 1 HP capacity Kirlosker/Crompton greaves along with 32mm PVC pipe with inter-water arrangements from OHT by providing 25mm G.I pipe with pipe specials.

Providing and fixing of Mechanical equipment for Alum Tank with electrically driven paddle assembly with suitable reduction gear coupled with 3-phase electric motor 1 HP capacity Kirlosker/Crompton greaves including providing and fixing of 25mm dia pipe for inter water arrangements including all pipe specials, gate valves and washout arrangements complete job

Providing, fixing, testing and commissioning of drive assembly unit for churners of floculator with 3-phase induction motor 2 HP capacity with reduction gear complete job

Providing, installation and successful testing commissiong of M.S rotating desulding bridge moving on rim, fixed on peripheral beam of the CLF with MS frame work with hand railing chequered plate flooring complete job with suitable reduction gear coupled with 3 HP 3 - phase motor of Kirlosker/Crompton greaves make complete job

Providing and fixing of mechanical equipment for flash mixer with electrically driven agitator assembly with suitable gear system coupled with 1 HP 3 - phase induction motor complete job

Supply, Installation and successful commissioning of mono-block pumping unit kirlosker/crompton make with 3-Phase induction motor coupled with pumping unit of 3000 gallons discharge per hour along with all accessories complete job with stand by arrangement of saving capacity.

Providing, fabrication and fixing of main panel board made out of angle iron with 16mm ply board with sunmica fitted with required appliances viz, 16 Amp fuse for alll electrically driven motors, 75 HP oil immersed start for said motors, MCB, bus bars, change over 3-phase circuit breakers complete job

Providing and installation including commissioning of 30 KVA 3-phase oil immersed voltage stablizer inside plant including all accessories as per requirement and connections etc complete job

Providing and fixing of 3.5crore copper conductor of required gauge for different electric motors (capacity varying from 1 HP to 5 HP)

Providing and installation of Main cable from LT pole to Main panel board

Providing and fixing of heating points all 7/20 PVC wire with all accessories.

Providing and fixing of lightening point 3/20 PVC wire with all accessories

Providing and fixing of triple layer PVC storage Tank on top slab of 500 litre capacity with all accessories for chemical dosing chmabers.

Providing and installation of LED flood lights of 400 watt capacity of 8000 lumini for lightening purpose of plant.

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 200mm dia D.I pipe

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 150mm dia D.I pipe

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 100mm dia G.I pipe

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 100mm dia bend

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 200mm dia bend

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 150mm dia Tee

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 100mm dia Tee

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 150mm dia Tail piece

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 200mm dia Tail piece

Providing, fixing and installation, successful testing commissioning of double flanged C.I/D.I/G.I pipe and pipe specials. 100mm dia Tail piece

Providing and fixing of double flanged C.I sluice valves of standard make Kirlosker PNI type including cost of nuts and bolts, rubber washers, all carraiges upto site of work complete job 100mm sluice valve

Providing and fixing of double flanged C.I sluice valves of standard make Kirlosker PNI type including cost of nuts and bolts, rubber washers, all carraiges upto site of work complete job 150mm sluice valve

Providing and fixing of double flanged C.I sluice valves of standard make Kirlosker PNI type including cost of nuts and bolts, rubber washers, all carraiges upto site of work complete job 200mm sluice valve

Providing and fixing of double flanged C.I sluice valves of standard make Kirlosker PNI type including cost of nuts and bolts, rubber washers, all carraiges upto site of work complete job 50mm sluice valve

Distribution Cables: Providing, Installation, testing of multi-stranded copper conductor PVC insulated single core unsheathed 35mm sq. Copper cable for internal distribution wiring. The multi-stranded copper cable to be laid through PVC conduits on wooden plain boards fixed on walls with suitable plugs, nails and clamps. The job also includes termination of ends of cable with suitable rating of Cu. thimbles duly taped. Original Manufacturer’s Test certificates in original to be provided with the material before installation. Make: KEI/ Finolex.

Service Cables: Providing, laying, installation and testing of 3.5 Core, 120 sq. mm. Aluminum Conductor, PVC insulated, armored cable from distribution box of Transformer to the Main Control Panel at both stages of the scheme. Job also includes providing and installation of aluminum Thimblings of appropriate ratings (24 No.) duly crimped and taped.Original Manufacturer’s Test certificates in original to be provided with the material before installation. Make: Havells/ Polycab/ Finolex

Gantry: a) P/F of 3-ton chain pulley block with Mono rail Pull Lift/ Indef make having lifting capacity of 5m. Complete with U. clamps, chain, hooks and other allied fixtures. b) Fabrication / Erection of Channel iron column to act as support for resting of Chain Pully Block with Monorail as per following details:-Vertical Posts = ISMC 150 No. of vertical posts = 02 Nos. Vertical channel section each post = 02 Nos. vertical post bracing = ISMC 100 Sole / Matching plates = 500x300x12 mm Height of vertical posts = 4.5 M size of vertical post concrete blocks = 600x600x900mm Concrete grade = M20(as per requirement) welding Electrode = Overcord SS of Adore/ESAB/L&T Monorail Section = ISMB 200 length of monorail Chain Pully Block with monorail = 3 Ton = 5M Steel Detail : i. ISMC 150 6.1Mx2x2 = 18 M @ 24.4kg/m = 439.2 kg ii ISMC 100 0.25Mx10x2x2 = 10 M @ 9.2kg/m = 92 kg iii Plate 0.500x0.300x8 (12mmthk) = 1.20 M²(12thk) = 112.80 kg iv Monorail ISMB 200 6.1 M @ 25.4 kg/M = 154.94 kgs v Bolts/Nuts (L.S) = 20 kgs Total = 818.94 kg = 820 KG say

Providing & fitting of lighting points for ( machine room , operators room,) as per site requirement in 1.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way of p / f of pearl or non-ploy carbonate angle holders , pvc gang box, switches, socket modules , regulators ,indicators, 09 watt LED lamps Make( Bajaj/GE/Havells/Phillips/syska). Make items Anchor, klick, S S K, Indo Asian, Philips, Havells .Included is cost on account of desired Bakelite / phylum switch boards with the wooden frames as per site requirements

Providing fitting of wear gaurd wall mount type lighting points for exterior walls in 1.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way of p / f of pearl or non-ploy carbonate angle holders , pvc gang box, switches, socket modules , regulators ,indicators, 09 watt LED lamps Make( Bajaj/GE/Havells/Phillips/syska). Make items Anchor, klick, S S K, Indo Asian, Philips, Havells .Included is cost on account of desired Bakelite / phylum switch boards with the wooden frames as per site requirements.

1100 volts, pvc insulated copper conductor through pvc conduit by way of p / f of 15 Amp switches, 6 pin socket of Anchor, Philips, S S K make as per site requirements. Heating points are to be connected from main control panel. All accessories required is to be provided by the firm.

Providing and fitting of 60W LED street light road outdoor type with angular stand/fixtures . The LED should be environmental friendly long life Versatile pressure die-cast aluminium IP65 roadway luminaries with high power LEDs as light source & exclusively designed polycarbonate cover along with electronic driver. The LED is to be controlled inside pumps house and connected to the Automatic voltage stabilizer. The wire used should be 2.5 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit pipe by way of p / f of pearl switches, socket modules , regulators Make items Anchor, Havells, S S K, Indo Asian, Philips .Included is cost on account of desired Bakelite / phylum switch boards with the wooden frames as per site requirements.

Providing, fitting of Distribution Board of indo Asian, S S K make 4 way S P N single door powder coated sheet steel enclosure for surface mounting fitted with bus bar, DIN channel, neutral link and incoming contact. the above DB is to be provided /fitted with double pole 40 amp MCB for Main. 32 A for heating circuit & rest 3 of 16/6 amps each for premises luminary, auxiliary circuit 0f make indo Asian, Havells. Further job includes providing / fitting 4 mm² multistranded single core 1100 volts, pvc insulated copper conductor through pvc conduit as service line from main panel as per site requirements. Connections should be made in such a way Lighting points is to be connected via automatic transformer by way of p/f switch socket arrangement with allied fixtures & and heating points to main panel. Job includes dismantling of existing damaged conduit , wires, conduit and cleaning the surface properly.one job at each stage

Providing of heavy duty tool kit Taparia make : Ring spanner of size 12-13,14-15,16-17,18-19,21-22,20-21,21-23,24-26,30-32 Plate Spanner of size12-13,14-15,16-17,18-19,21-22,20-21,21-23,24-26,30-32 Pipe wrench 36” & 14” one each, Plair -01 no. Screw driver set 01 set Providing of one no Heavy duty re- chargeable flash light. 01 no L-N Key – 1 set Providing of 04 no’s plastic chairs with one table of samrudhi make- 01 set Providing clamp type multi meter (AC/DC). make meco Providing and fitting of link rod.-01 no Providing and fitting of shock proof matting 2x3 m 20 mm thick-4 no’s

Providing, fitting of 3 kva copper wound single phase automatic voltage stabilizer to operate on 90-240 volts giving constant output of 220 volts for lighting circuit. Included is also p/f of 2 no socket modules & 3 pin top plugs with indicator of 16 amps for input & output circuit to & from stabilizer. Job includes providing of 4 sq mm PVC insulated copper wire in conduit for input and out put connections.

Providing/fitting/testing/commissioning of power backup systems with pure sine wave home ups coupled with an inbuilt environmentally friendly zero maintenance tubular SMF VRLA gel batteries in a single console. The batteries should be sealed for life that is they should not have any requirement for water topping up or any spillage. The power bus should be equipped with a multi colored LCD user interface for better usage & monitoring. Technical specification. o Inverter rating = 850VA o Inverter Type = home UPS o Battery capacity = 150 Ah. o Battery Model = Tubular Type. o No Batteries = 01 No. o Output voltage at no load = 220+/-7 o Output frequency = 50 HZ +/- 1 o Output wave form = pure sine wave Make: Exide, Phillips, Microtek, luminous. Warranty:-UPS = 02 years ,Batteries = 03 years The combo unit is to be provided with warranty card for on door service during warranty period. Further job includes providing/fitting of separate circuit involving 2.5mm square multi stranded copper conductor form main auxiliary panel, 16 amp switch, socket separate modules, wooden blocks, hylum sheets, 03 pin top, earthing conductor from main earthing station, desired conduits, pvc channels & all allied items as per site requirement

Constructing of Earthling station :Supply , installation , testing and commissioning of earthing electrode comprising of company fabricated earthing electrode as per IS :3043 for carrying out earthing . The job includes drilling / boring of 200 mm dia bore to the depth of 6 feet . Connecting the cable tray through GI strips of suitable thickness besides making surface pit in brick / cement concrete of appropriate size. The earthing electrode shall be of 76/80mm dia and 1.83 mtr length of reputed make. The backfilling properly mixed compound as required .

Providing of four number good quality blankets, Two no’s good quality mattress, quilts, pillows with covers for all. Two No. pressure cookers of 5 liters capacity (Hawkins make), one No. al/steel tea pan, 4 No. steel glass,4 cups, 4 steel plates, 4 no steel spoons, 1 steel jugs,2 no plastic jug, two number buckets ,5 liters handigas with burner, Electric cooking heater, 2 liters Collin ,dhoti cloth, 2 No. shook proof grouse, Bathroom broom, 2 No. brooms for room cleaning, 1 No. wiper, harpic.,.one no Heavy duty re- chargeable torch lantern led light. 04 no’s heavy duty link locks:

Supply, fitting ,installation , testing and commissioning of 150 KvA three phase water cooled DG Set with aacoustic enclosure 01 c unit , battery charging inverter 1450 VA -01 no, fuel storage arrangement 220 L capacity barrels-02 no’s, Barrel pump-01 n0, Chemical earting as per specification of DG set and construction of concrete base foundation as per size of bed, cables- 120 sq mm 3.5 core armoured Al cable-120 mtrs with thimbles site requirement( altitude 1610AMSL)