Upgradation of inner links at Binner

Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 m in width as well as10 sqm on plan including disposal of excavated earth, lead up to 50 meter and lift upto 1.5m, as directed by Engineer-in-Charge. All kinds of soil :

Supply and filling of Nallah muck / quarry muck / RBM incl. spreading, ramming, and watering with consolidation 8-10 tonne capacity Road roller to the required gradient and camber incl. carriages from source to site of work complete.

Supplying, stacking and laying spraeding and compacting stone aggregate of 63-45mm size to WBM specifications in uniform thickness hand picking rolling with 3 wheeled road/ vibratory roller of 8-10 ton capacity in stages to proper grade and chamber applying and brooming 13.20mm type A bscreening/ binding material to fill up interstices of coarse aggragate watering and compacting to required density incl carriage of materials as involved complete.

Providing and laying of RCC Spun pipes including trench excavation, dressing ramming, laying nallah muck / boulders underneath the pipes and providing nallah muck / quarry muck / G.S.B cushion of specified thickness as directed by the officer In-Charge. Inclusive of all carriages, consolidation, watering etc.

Demolishing R.C.C. work manually / by mechanical means including stacking of steel bars (serviceable) and disposal of unserviceable material within 50 meters lead as per direction of Engineer-in-charge.

Providing and laying in position specified grade of reinforced cement concrete including curing but excluding the cost of centering, shuttering, finishing and reinforcement. All works upto plinth level. 1:1½:3 (1 cement : 1½ coarse sand : 3 graded stone aggregate 20 mm nominal size).

Centering and shuttering including strutting, propping etc. and removal of form work for: Complete Job. (a) Foundations, footings, bases for columns, sides of Drains blocks etc.

Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete. Thermo-Mechanically Treated bars of grade Fe-500D or more.

Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer and two or more coats of paint all complete. Welded

Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge