PROVISION OF DEFI FURNITURE FOR JCOs MD ACCN AS PER NEW AUTH AND PROVN OF 35 X LOCKER STEEL FOR OTM ACCN AND SPL REPAIR / REPLACEMENT RENEWAL OF CHARPOY AND LOCKER BED SIDE FOR OTM AND OR MD ACCN ACCN AT JODHPUR MIL STN UNDER GE (ARMY) NO. 01 JODHPUR

Amount

Looking Mirror of size 4'x2'x6mm beveled edges (TP) S & F Looking Mirror of size 4'x2'x6mm thick including half beveled edges, back support of prelaminated MDF 18mm thick exterior gde fixed on exterior gde Prelam MDF board & glass on SS Glass studs/spacers size 25mmx25mm/1'' heavy duty all as directed by Engr-in-charge.

Table Dressing Ladies (FD/E6/MAP-II/07) All wood work shall be first class teak wood well seasoned free from knots/cracks. Top/side/drawer/bottom/back shall be made of 18mm thick pre-laminated Particle Board exterior grade. Full Panel MS drawer slide ivory colour powder coated of size 86 mm (H) X350mm (L) (Make- Ebco,Hetich,Godrej) with 9 mm thick Prelaminated Particle Board BSL Exterior grade bottom and front and rear shall be 18mm thick Prlaminated Particle board BSD exterior grade . 01 Nos Std quality magnetic catcher (Make- Ebco,Hetich,Godrej) shall be provided to each shutters .S S Handle shall be provided to drawer /Shutter as per sample kept in BSO yard. Heavy duty concealed hinges (Make- Ebco,Hetich,Godrej) shall be provided to each shutter with lock (Make- Ebco,Hetich,Godrej). Std quality Cam lock connector/dowels fastening /Universal angle/PVC Corner shall be used in fabrication of body/structure of item. 1.6/0.9 mm thick PVC edging shall be provided wherever required with edge bander machine as directed by EIC.Telescopic channel (Make- Ebco,Hetich,Godrej) ) shall be used in lieu of TW Runner irrespective of whatever is shown in drg. Cushion of stool dressing shall be 75mm thick & 40 density upholestered with tapestry/rexine of range not less than Rs.250/-. (as per sample kept with BSO yard) and as approved by GE. All exposed and hidden surfaces of woodwork shall be melamine polished with high glossy finish .Rest all as shown on drg and as directed by EIC.

Description of Work / Item(s)

Amount

Locker Bed Side Steel (FD-1029) All as shown on drawing. Overall size shall be 760mm long, 600mm wide and 1100mm high. All CRCA steel sheets shall be of 20 gauge thick. All steel surfaces ext/int shall be provided with two coats of synthetic enamelled paint over a coat of red oxide primer with spray machine after preparation of surfaces with putty. Hammer tone finish or colour shade as approved by GE shall be applied on body and shutters. Painting work shall be done at BSO Yard. Rest all as shown on drg and as directed by EIC.

Bed Hard Steel (FD/E6/MAP/08(R)) All as shown on drawing. The complete frame work shall be made of CRCA box section with 18 guage . Long rails and short rail shall be made of 25mm x 65mm box section of 18 gauge. Frame work for foot/head board shall be 18mm x 18mm box section of 18 gauge. The bed top shall be 12 mm thick plywood top BWP grade confirming to IS 710. The main frame work for foot/head board along with legs shall be made out of CRCA box section of 38mm x 38mm with 18 G thick. The foot board / head board shall be covered with 18mm thick prelaminated particle board exterior grade with 0.8 mm thick PVC edging with edge bander machine. Detachable head board and foot board complete shall be provided . All metal work shall be powder coated (Black) . All joints / gaps shall be filled with metal putty / primer before powder coating. Inner hard rubber shoe shall be provided to each legs. Complete all as shown on drg and as directed by EIC.

Almirah Med Steel (FD-1032) All as shown on drawing. Overall size shall be 760mm long 440 mm wide and 1270mm high. Top, sides, bottom,back, front and shelves of Almirah shall be of 20 gauge thick CRCA sheet. Front shutters shall have two leaves. Three shelves equally spaced making four compartments shall be provided. All joints, welding & fixing shall be done in accordance with the standard workmanship and specification shown in drawing. A three-way locking device controlled by a brass lever lock and operated by a chromium plated metallic handle-01 No shall be provided. All steel surfaces shall be powder coated. The shade of powder coating shall be as approved by GE and in dual/contrast colour. Rest all as shown on drg and as directed by EIC.

Charpoy IP Hard top (FD/MAP-II/01) All as shown on drawing. The complete frame work shall be made of CRCA box section with 16 guage . Charpoy top shall be 12 mm thick BWP Marine grade IS-710 plywood and fitted with suitable shunken type nuts & bolts with washer. Head rest and foot rest shall be detachable. All metal work shall be powder coated (black). Std quality rubber shoe shall be provided to each legs. Rest all as shown on drg and as directed by EIC.

Apsara Industries (BID ID -3127103)

Shri Maruti Trading Co. (BID ID -3127278)

NIHAL ENTERPRISES (BID ID -3127021)

ASHOKA FURNITURES (BID ID -3123938)

BHARAT BUILDERS (BID ID -3125157)

agarwal and company (BID ID -3126899)

shiv shakti steel industries (BID ID -3122278)

Apsara Industries (BID ID -3127103)

Shri Maruti Trading Co. (BID ID -3127278)

NIHAL ENTERPRISES (BID ID -3127021)

ASHOKA FURNITURES (BID ID -3123938)

agarwal and company (BID ID -3126899)