LAYING OF UNDERGROUND CABLE, FAULT FINDING & RECTIFICATION WORK AT VARIOUS SDN UNDER TALOD DO.

Sr.No. Description Unit Amount in

Laying (including installation, testing and

commissioning) of various size of Single circuit

KV XLPE insulated Alluminum armoured Cable in

ground 1200 mm deep and 300 mm wide trench,

providing sand cushioning below (75 mm thick

layer of sand) and above (75 mm thick layer of

sand) of the cable and covering it with RCC half

round Hume pipe (150 mm inner diameter with

thickness of 30 mm and One meter in length)

before refilling pre-bonding tap/warning tap

should provide below 700 mm from the ground

level and back filling the same to make ground

level as per original. As per specification and

drawing of UGVCL. (RCC half round pipe should

be provide throughout on cable without gap).

Only Cable will be supplied by UGVCL.

Laying (including installation, testing and

commissioning) of various size of Double circuit

11 KV XLPE insulated Aluminum armoured Cable

in ground in single trench 1200 mm deep and

mm wide trench, providing sand cushioning

below (75 mm thick layer of sand) and above (75

mm thick layer of sand) of the cable and covering

it with RCC half round Hume pipe (150 mm inner

2 diameter with thickness of 30 mm and One meter MTR 200 468

in length) before refilling pre-bonding

tap/warning tap should provide below 700 mm

from the ground level and back filling the same to

make ground level as per original. As per

specification and drawing of UGVCL. (RCC half

round pipe should be provide throughout on

cable without gap). Only Cable will be Supplied by

Laying of various size of 11 KV XLPE

3 insulatedAluminium armoured cable above MTR 150 38

ground in air for termination of cable on pole as

Signature of Tenderer Company’s Round Seal Page 1 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

per site condition and instruction of engineer in

charge ( Excluding cost of clamp and pipe )ground

level as per original. As per specification and

drawing of UGVCL(RCC half round pipe should be

provide throughout in cable without gap, Only

cable will be supplied by UGVCL

Supply and installation for set of clamps of clamps

made from 50*6 mm GI flat ( Min weight of flat

4 1.6 KG per set) for fitting for 110mm GI/HDPE Nos. 100 130

pipe above ground with the pole ( with cost of

Supply and installation for set of clamps of clamps

made from 50 x6 mm GI flat ( Min weight of felt

5 1.8 KG per set) for fitting for 160mm GI/HDPE Nos. 100 150

pipe above ground with the pole ( with cost of

Laying of various sizes of 11 kv XLPE insulated

Aluminium armoured cable in cable tray/trench

over / below the ground level( Excluding cable

tray, only labour charges)

Laying of HDPE pipe confirming to IS

4984:1955(Amendment no.2) having diameter

110 mm and minimum thickness 5mm at a

minimum depth of 1200mm below the road

surface by push through method by drilling the

road with HDD machine/manualy without breking

the road surface and laying of nay size of HT/LT

XLPE insulated aluminum the duct as per the

instruction of EIC and specifications (without cost

of HDPE pipe,cable will be supplied by UGVCL)

Supply of HDPE pipe having 110/120 mm

diameter (As required), minimum thickness 5 mm

as per IS ( Amendment no.2 IS 4894:1995) for

laying of PE 100,6kg/cm2 for 11 kc XLPE cable.

Supply and Fixing of medium grade GI pipe of size

9 of 110 mm Diameter (Min 2.5 meter required) MTR 100 925

Weight 9 to 10 kg/Mtr.

Indoor application: HT push on/heat shrinktype

end termination preferably for at switchgear end

boxes, transformer(PAD/Pole mounted) for 3 core

10 185 Sq mm11 kV XLPE Aluminium Conductor Nos. 25 4953

Armoured cable as specified with connection of

leadsincluding cutting, stripping of cable,

insulations, providing compression type

Signature of Tenderer Company’s Round Seal Page 2 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

terminals,crimping of lugs with suitable crimping

tool. ( As per Technical Specification)

Indoor application: HT push on/heat shrink type

end termination preferably for at switchgear end

boxes, transformer( PAD/Pole mounted) for

core 240 Sq mm 11 kV XLPE Aluminium

11 Conductor Armoured cable as specified with Nos. 30 5252

connection of leads including cutting, stripping of

cable, insulations, providing compression type

terminals, crimping of lugs with suitable crimping

tool. ( As per Technical Specification)

Provinding and fixing HT push on/heat shrink type

end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

mounted) for 3 core 11 KV XLPE Aluminium

12 Conductor Armoured cable as specifield with MTR 30 5982

connection of leads including cutting, stripping of

cable , insulationas, providing compression type

terminal, crimping of lugs with suitable crimping

tool, outdoor application(120/150/185 mm2 HT

Provinding and fixing HT push on/heat shrink type

end outdoor termination kit of

3M/Raychem/Frontier/Yamuna make at

switchgear end boxes, transformer (PAD/Pole

mounted) for 3 core 11 KV XLPE Aluminium

Conductor Armoured cable as specifield with

connection of leads including cutting, stripping of

cable , insulationas, providing compression type

terminal, crimping of lugs with suitable crimping

tool, outdoor application(240mm2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna

make for 3 core 11 KV XLPE Aluminium

Conductor Armoured cable as specifield with

connection of leads including cutting, stripping of

cable, insulations, providing compression type

terminals, crimping of luges with suitable

crimping tool. (120/150/185 mm 2 HT XLPE Cable)

Provinding and fixing HT push on/heat shrink type

Straight joint 3M/Raychem/Frontier/Yamuna

make for 3 core 11 KV XLPE Aluminium

Conductor Armoured cable as specifield with

Signature of Tenderer Company’s Round Seal Page 3 of

Place: Signature of Tenderer Date:

Save Energy for Benefit of Self and Nation

connection of leads including cutting, stripping of

cable, insulations, providing compression type

terminals, crimping of luges with suitable

crimping tool. (240 mm 2 HT XLPE Cable)

Provinding and fixing of Route Marker of CC 1:2:4,

150mm*150mm*750mm concrete stone

embedded in earth atleast 300mm below the GI

and 450mm above GI at distance of

approximately 100 mtr or as directed by engineer

in charge The route marker must be painted with

yellow colour of stone with red colour for

embracing on stone UGVCL 11 KV cable

labour charges for HT cable underground fault

18 Digging Labour Charge per fault Nos. 50 1000

Supplying & Erecting of maintaince free earthing

System comprising of 17.2mm dia 3mtr Long

19 earthing electrode of low carbon steel electrode Nos. 40 4075

with 250 micrns copper coating on cable armour

as per specifications.

Supply installation & commissioning of earthing

conductor 25x3 mmG.I. strip for pole mounted

transformer and upto FSP,RMU as well as

connection to be made To the earth pit. Rates

inclusive of hot dipped hard wares & cable

21 FRP Clamp for cable Nos. 65 130

22 FRP Clamp for Pipe Nos. 65 150

23 Cable Climbing on pole Mtr. 65 170

24 Welfare Cess @ 1% of Estimated Cost Each 1 25171.68

TOTAL AMOUNT OF TENDER (In Rs.)

TOTAL AMOUNT OF TENDER (In Rs.)

EXECUTIVE ENGINEER

UGVCL, TALOD DO

Signature of Tenderer Company’s Round Seal Page 4 of

Place: Signature of Tenderer Date: