IMPROVEMENT TO KITCHEN IN CERTAIN MARRIED ACCN IN HAWK AREA AND PROVN OF WEATHER SHELTER FOR TETTRA SCHOOL AT AFS BIDAR

Amount

Schedules of Works

Demolition of stone slabs and tiles of any description or thickness in floors, aprons, etc laid, bedded and pointed in any mortar etc, complete all as specified and directed

Demolition of cement concrete (reinforced) of any description and in any position not otherwise specifically provided for reinforcement cut as required to facilitate demolition, complete all as specified and directed

Material and labour, for reinforced cement concrete type B1, 1:2:4 (using 20mm graded stone aggregate) as in slab supported on walls, beams and columns in floors, canopies, deck slab and shelves and like complete all as specified and directed

Material and labour, for mild steel TMT bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with the including mild steel wire (annealed) not less than 0.9mm dia or securing with clips

Use and waste of formwork (flat concreted surface) to soffits of suspended slabs as in roof slab, landing, deck slab and similar work not exceeding 20mm thick complete all as specified and directed

Material and labour for, 18- 20mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window-cills, cooking platforms and like over and including screed bed or bedding layer of mortar 20 mm thick in cement mortar 1:6 and pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite all as specified and directed.

Rounding to edges of stone slabs one edge, such as in steps, cooking platforms and other similar locations.

Making hole through kitchen cooking platform including RCC slab suitable for inserting gas stove pipe complete all as specified and directed

Dismantling floor, hearth or wall tiling including cement mortar bedding and removal of debris out of premises complete all as specified and directed.

Material & Labour for, coloured glazed ceramic tiles in vertical surfaces of size 300x450x7mm thick set and jointed in neat cement slurry and pointed in white or coloured cement to match, including 10mm thick backing coat in CM (1:4), complete all as specified and directed.

Material and labour for, Coloured glazed ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match with the existing including screed bed or bedding layer of mortar 15mm thick in CM (1:6), complete all as specified and directed.

Demolition of brick/ block work or stone/ PCC Block built in cement mortar complete all as specified including removing debris out of premises all as directed.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 40 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:4 complete all as specified and as directed.

Taking down cement plaster on brick or stone walls etc including racking out joints, hacking for key, scrubbing down with water etc complete all as specified and directed.

Material & Labour rendering for 10 mm thick in CM 1:6 on brick/concrete wall surfaces of any description, and finishing the surfaces even and smooth without using extra cement complete all as specified and directed.

Material & Labour for rendering 05 mm thick cement plaster on faces of brick work or concrete surfaces in cement mortar (1:3) as in ceiling finished even and fair without using extra cement all as specified and directed.

Material & Labour for applying two coats of distemper oil emulsion over a coat of primer on, pilasters, cornices, etc., on newly plastered walls including preparation of surfaces all as specified and as directed.

Material & Labour for applying two coats of distemper oil emulsion over a coat of primer on newly plastered ceiling surface including preparation of surfaces all as specified and as directed.

Material & Labour for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer on old Wall surface all as specified and as directed.

Material & Labour for complete removal of existing treatment and applying two coats of distemper oil emulsion over a coat of primer on ceiling, on old surface complete all as specified and as directed.

Taking down unserviceable steel tubing 15mm bore and connection and Supply and fix 15mm dia bore GI tubes medium grade with all fittings and fixed complete to walls all as specified and directed.

Supply and Fixing in repairs 15mm bore chromium plated cast copper alloy Bib taps fancy type with crutch or butterfly handle screwed down screwed for iron pipe or for brass ferrule with wall flange, complete all as specified and as directed. Make: Prayag CAT No. 8306 or Techno commercial equivalent of approved makes specified here-in-after.

Taking down chowkats or frames not exc 1.5 sqm each with shutters (without taking off shutters from the frame), complete all as specified and as directed.

Taking down chowkats or frames exc 1.5 sqm but not exc 4sqm each complete all as specified and as directed.

Material and labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections / appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws complete all as specified and directed

Material and labour for Providing and fixing Powder coated aluminium (minimum thickness of powder coating 50 micron) weighing not less than 0.55 Kg/RM for shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber/ neoprene gasket required (Fittings shall be paid for separately) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS:1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ panelling, C.P. brass/ stainless steel screws complete all as specified and directed.

Material & Labour for mild steel framed work as in grills with ends of bars shoulders or framed guard bars and similar work conforming to Fe-290 Gde-E-165 complete all as specified and as directed.

Supply and fix, pressed steel door frame made out of MS sheet of size 105x60 mm x 1.25 mm thick for doors/windows with one or more rebates including necessary fixing lugs, hinges, lock strike plate etc including packing of hold fast with PCC 1:2:4 complete all as specified.

Material and labour for PCC 1:3:6 type C-0 (12.50 mm graded aggregate) for filling back of chowkats, etc complete all as specified and directed

Material & Labour for Second class hardwood glazed and skeleton shutters 35mm thick, as in doors, open rebated and prepared to receive glass, gauze etc. (without sash bars) edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass gauze etc , sizes of members of shutters as specified in SSR Part I section 8, clause 8.24(a) and fitted to chowkats, complete all as specified and as directed.

Material & Labour for plain sheet glass plain 4.8mm thick ordinary quality and glazing with oil putty in square not exc 0.5 Sqm in each pane complete all as specified and as directed.

Supply and fix Stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm fixed with tinned tacks, or stainless steel wire staples all as specified & directed.

Material & Labour for preparation of new steel surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of red oxide primer complete all as specified and as directed.

Material & Labour for preparation of new wooden surfaces of any description exc 10 cm width or girth and applying two coats of synthetic enamel paint, first quality, over a coat of pink primer complete all as specified and as directed.

Supply & Fixing aluminium anodised barrel tower bolts, of extruded section 150mm long complete all as specified and as directed.

Supply & Fixing Aluminium anodized sliding door bolts, 300mm long with hasp and staple (bolt type) and fixing clips of sheets, cast or extruded section and fixing bolts and sliding bolts of extruded section or cast aluminium alloy complete all as specified and directed.

Supply & Fixing 150mm long extruded aluminium alloy D type handle fabricated type, complete all as specified and as directed.

Supply & Fixing floor door stopper of aluminium alloy body and tongue (overall length of cover plate 140mm) with hard drawn steel spring complete all as specified and directed

Cutting holes in walls built in CM for inserting hold fasts & making good dismantled portion in cement mortar 1:3 or cement concrete 1:2:4 type B-1 as required n exc one brick wall complete all as specified and directed.

Material and Labour for 18/19mm thick Plywood, grade BWP type BB fixed with screws to timber frame complete all as specified and as directed.

Material and Labour in repairs for 1mm thick laminated mica sheet in any colour finishes fixed with adhesive material for shutters of ward robes ,cabinets etc all as specified and as directed.

Supply and Fixing for G-shaped anodized aluminium handle profile and sliding wardrobe single groove type track, etc., for shutters etc in any colour and designed to perfectly complement 18/19mm ply fixing with kitchen cabinet, ward robes etc complete all as specified and as directed.

Supply and Fixing of Continuous (piano) hinges, mild steel, 30mm Width of flaps (when open) in mm, complete all as specified and as directed.

Supply and Fixing of stainless steel magnetic catchers of 30 - 40mm long for wardrobe, kitchen cabinets etc complete all as specified and as directed.

Supply and Fixing for plain basket SS 304 grade of size 370 x 485 x 200 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6150

Supply and Fixing for cup and saucer basket SS 304 grade of size 370 x 485 x 100 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6157

Supply and Fixing for plate basket SS 304 grade of size 370 x 485 x 200 mm fixed to kitchen cabinet with suitable arrangement complete all as specified and as directed. Make: Godrej Product Code:6164

Supply and Fixing for stainless steel soft close telescopic slides of length more than 450 mm and capacity up to 45 Kgs for kitchen cabinet, ward robes etc complete all as specified and as directed. Make- Godrej or Equivalent.

Supply and fix in repairs, Stainless steel sink of 1.00mm thick kitchen or laboratory with plugs, washers and wastes, CP waste coupling, PVC waste pipe, reducer sockets, etc ; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm as in repairs all as specified and directed.

Supply & Fixing in repairs PVC waste pipe 32mm bore for WHB/Sink/Urinal, complete all as specified and as directed. Make: Prayag or Equivalent

Supply and Fixing in repairs 75 mm dia PVC (SWR) pipes, type 'B', single socketed, in any length with rubber joints laid in floors, etc. complete all as specified and as directed.

Supply & Fixing in repairs 75mm bore PVC (SWR) bends with access door complete all as specified and directed

Supply & Fixing in repairs 75 mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete all as specified and directed

Supply & Fixing in repairs 75mm bore PVC (SWR) bends complete all as specified and directed

Supply & Fixing in repairs 75mm dia PVC (SWR) floor trap with CP grating including jointing with solvent cement complete all as specified and directed

Supply and fix in repairs PVC (SWR) gully trap 125 mm, setting and jointing with solvent complete all as specified and directed

Surface excavation not exceeding 30 cm Depth and average 15 cm deep in hard/dense soil, complete all as specified and as directed.

Excavation in post holes (or similar holes) in hard/dense soil each n exc 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus soil to a distance n exc 50m and making good surface, complete all as specified and as directed.

Material and labour for, Plain cement concrete type D2 1:4:8 (40mm graded stone aggregate) as in foundations, filling and mass concrete, complete all as specified and as directed.

Material and labour, for Pre-cast cement concrete block masonry with grade ‘C’ solid blocks exceeding 10 cm in width, having minimum compressive strength of 40 Kg / Sq cm as per IS 2185 (Part- I) 2005 and set in CM 1:6 complete all as specified and as directed.

Material and labour for, Plain cement concrete type B2 1:2:4 (Using 40mm graded stone aggregate) in foundations, filling and mass concrete, complete all as specified and as directed.

Supply and fix, mild steel Roof trusses (framed),Vertical post, trussed purlins crane gantries, rails and fastenings and heavy bracket framing (Square or Rectangular hollow sections) including distance pieces, cleats, screw bolt with washers and one hexagonal or square nuts etc. conforming to Fe-290 Gde-165 , complete all as specified and as directed.

Supply and fix, mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging also fastening and fixing conforming to Fe-290 (Grade E 165), complete all as specified and as directed.

Supply and fix, Pre-Painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550Mpa as in roof covering/cladding to wall, fixed with self tapping screws as specified, complete all as specified and as directed.

Supply and fix, Pre-painted Galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws, complete all as specified and as directed.

Material and labour for preparation of New or previously untreated steel surface or any description not exc 10cm in width or girth, when unconnected with other painting or when painted in a different tint and applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and as directed.

Material and labour for, for hard core of broken stone broken to gauge not exc 63 mm deposited, spread and levelled in layers not exc 15cm thick, watered and rammed to a true surface, complete all as specified and as directed.

Material and labour for, 75mm thick plain cement concrete type D-2, 1:4:8 20 mm graded stone aggregate as in sub base of floor and path, complete all as specified and as directed.

Material and labour for Coloured chequered PCC tiles of size 30cm x 30cm x25mm thick set, jointed and pointed in neat cement slurry in floors with grey pigment cement & pigment etc including screed bed or bedding layer of mortar 20mm thick(1:4) for laying floor finishes as specified and as directed

Supply and fix, mild steel in Bands, straps, supports or stays for rainwater, ventilating pipes, including bolts, if required: hooks (stay), heavy, for large gates; hook and pintle hinges: large hasps and staples; chains; hand made sliding bolts; clamps; hold fasts; wall ties; hooks for hanging fans; plain angle cleats for securing purlins to wood trusses or rafters; knee piece inserts; two way and three way straps, plate washers and similar small articles conforming to Fe-290 Gde-E-165.

Supply and Fixing in repairs 75 mm dia PVC (SWR) pipes, type 'A', single socketed, in any length with rubber joints laid on wall surfaces, including necessary clamps complete all as specified and as directed.

Taking down carefully copper/aluminium point wiring (Light, fan, socket, or power) complete (fittings such as switches, ceiling roses, pendants, regulators, sockets etc for credit

Material and labour for concealed/ casing Point wiring for one light point/fan point/ bell point controlled by one switch (using red, black and green colour wires as colour coding) complete with 1.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit 20mm dia (medium duty, ISI marked) with all fittings and all accessories i.e. pipe bend, pipe hook, elbow, junction boxes including 2mm thick galvanised steel pressed sunken box suitable modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket / regulator etc, including provision of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continues as earth wire connected to earth dolly etc. including cutting chases in wall and making good distributed surfaces of walls/ceiling/floors etc. by using CM (1:3) complete all as specified and as directed. Note : Switches/ socket / regulator shall be measured and paid separately under appropriate item of BOQ).

All as specified in sl Item No 73 here-in-above, but for One socket out let 5 Amps point controlled by one switch (on same board) complete all as specified and as directed by Engineer-in-charge. (switches/ socket shall be measured and paid separately under appropriate item of BOQ).

All as specified in sl Item No 73 here-in-above, but for One socket out let 5 Amps point controlled by one switch (on independent board and not below the any other switch board) complete all as specified and as directed by Engineer-in-charge. (switches/ socket shall be measured and paid separately under appropriate item of BOQ).

All as specified in sl Item No 73 here-in-above, but for One power point controlled by one switch (using red, black and green colour wires as colour coding) complete with 2.5 Sqmm (nominal cross section area) single core FRLSH PVC insulated unsheathed and multi strand copper conductor cable 1100 volt (ISI marked) drawn through existing PVC conduit but including 2mm thick galvanised steel pressed sunken box suitable modular switch socket (Min 60mm deep, suitable length) concealed in wall, including inner and outer plates (cover plate) suitable for fixing the modular switches / socket / regulator etc, including provision of 1.5 Sqmm single core FRLSH PVC insulated multi strand copper conductor wire continuity as earth wire connected to earth dolly etc. complete all as specified and as directed. Note : Switches/ socket / regulator shall be measured and paid separately under appropriate item of BOQ).

Supply and fix, modular switch 1 way, SP, 6 amps, 1 module complete all as specified

Supply and fix, modular switch 1 way 16 amps, 1 module complete all as specified

Supply and fix modular sockets 6 amps, 2/3 pin combined two module complete all as specified

Supply and fix modular sockets 6/16 amps, 2/3 pin combined 2 module complete all as specified

Supply and fix modular white cover suitable with frame 3 module complete all as specified and directed.

Supply and fixing modular white cover suitable with frame 8 module complete all as specified and directed.

Supply and fix modular metal flush box with 3 module complete all as specified and directed.

Supply and fix modular metal flush box with 8 module complete all as specified and directed.

Supply and fix of ceiling rose surfaces Bakelite 63.5 x 28 mm three terminals all as specified

M & L for Submain wiring / power wiring with 2 runs of single core 6 sqmm PVC insulated unsheathed multistranded FRLSH cable, 1100 volts grade, multistranded with copper conductor, drawn through and including suitable size of rigid non metallic PVC conduit ISI marked and its accessories including Single run of single core 6 sqmm PVC insulated unsheathed multistranded 1100 volts grade with copper conductor cable as earth continuity conductor complete all as specified and directed. Note: Two runs of main copper conductor, one run of copper conductor for earth continuity and one run of conduit shall be measured as one unit length.

Supply and fix in repairs, MCB DB SPN 4 way (Horizontal), double door with Sheet metal enclosure, flush mounted, prewired, 240 V, AC, 50 Hz, Factory made, powder coated, IP 54 protection conforming to IS-13032 universal mounting with 200 Amps rated copper bus bar, neutral link, earth link, earthing studs, detachable gland plates with knockouts on both sides, etc complete all as specified and as directed. Notes : i) All unused modules shall be provided with blanking plate for which the cost is deemed to be included in the cost of MCB DBs. ii) MCB/ Isolators will be measured and paid separately as supply and fix under respective items.

Supply and fix in repairs, MCB SP 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Supply and fix in repairs, MCB SPN 6 - 32 Amps, C-curve, 10 ka breaking capacity, complete all as specified and as directed by Engineer-in-Charge.

Taking down exhaust fan for carrying out wall plastering and refixing the same duly grouting with new nut and bolts and finishing with cement plaster to the exhaust fan hole and provision of New GI louvers complete all as specified

Material and Labour for lamp holder modular type Batten Modular type PVC/polycarbonate type with blank plate including provision of LED bulb 12 Watt capacity suitable for batten fittings complete

Supply and Fix in repairs, high efficient LED light fitting luminaire 18 - 20 W with extruded Aluminium batten (4 feet), system efficacy 100 lm/W, IP- 20 protection, surge protection 2 kV, driver efficiency >85%, power factor > 0.95, THD ≤20%, ,colour rendering index CRI >80, temperature range 0 to 45 degree centigrade, CCT: 6500K, Voltage range 140-270V AC suitable for Surface, Wall and Conduit mounting including provision of 1 sq mm PVC flexible twin core cable, complete all as specified and as directed. Make : Crompton/Bajaj/Wipro/ Eveready

M/s D.Krishna Varma (BID ID -3368083)