Comprehensive Operation & Maintenance of Civil & Electromechanical assets such as intake wells/structures or offtake structures, elevated service reservoirs (E.S.R), HGLR, sump, water treatment plant, chemical house, staff quarters, pump house, all bulk transmission and distribution pipelines, valves, pumping machinery & electrical equipment etc. for the Kansumra Masitiya water supply scheme, including supply of 6.75 MLD potable water to all the 10 villages for 60 months period. Taluka: Jamnagar District: Jamnagar based on NC-18. Excluding supply of PAC, bleaching powder and chlorine gas.

Name of Work: Comprehensive Operation & Maintenance of Civil & Electromechanical assets such as intake

wells/structures or offtake structures, elevated service reservoirs (E.S.R), HGLR, sump, water treatment plant,

chemical house, staff quarters, pump house, all bulk transmission and distribution pipelines, valves, pumping

machinery & electrical equipment etc. for the Kansumra Masitiya water supply scheme, including supply of

MLD potable water to all the 10 villages for 60 months period. Taluka: Jamnagar District: Jamnagar based on

NC-18. Excluding supply of PAC, bleaching powder and chlorine gas.

Amount up to 2decimals

Part Description

Comprehensive Operation & Maintenance of Civil & Electromechanical

assets such as intake wells/structures or offtake structures, elevated

service reservoirs (E.S.R), HGLR, sump, water treatment plant,

chemical house, staff quarters, pump house, all bulk transmission and

A distribution pipelines, valves, pumping machinery & electrical

equipment etc. for the Kansumra Masitiya water supply scheme,

including supply of 6.75 MLD potable water to all the 10 villages for

months period. Taluka: Jamnagar District: Jamnagar based on NC-18.

Excluding supply of PAC, bleaching powder and chlorine gas.

Maintenance activities, measured and paid separately, such as

painting, cleaning of reservoirs/ tanks, procurement and replacement

of filter media etc complete as per this tender document

C Repair, upgradation of non-functional assets which are crucial for safe

and efficient functioning of RWSS

Total Amount (A+B+C)

Total Amount (A+B+C)

Total of Schedule B in Rupees Three Crore Ninety Four Lacks Sixty One Thousand Nine Hundred

Sixty Three and Nineteen Seven Paisa Only

I / We am / are willing to carry out the work at % above / Below percent (should be

written in figure and words) of the estimated rates mentioned above amount of my / our tender

works out as under.

Estimated amount Put to tender: Rs. Estimated amount Put to tender: Rs.

Deduct % above Rs. Add % above Rs.

Net Rs. Net Rs.

In words Rupees In words Rupees

 Rates to be quoted exclusive of GST.

 Part A is payable on monthly basis whereas part B & C are subject to completion of activities

and approval of the measurement.

 Water supply of target quantity of water to all villages on a daily basis. If due to breakdown,

agency is not capable of supplying water then such quantity should be supplied the next day

to cope up with the shortage. Such that the water supplied on the next day will be 2 times the

regular per day target.

 Contractor should quote rate in words & figure both.

 Insurance Policy should be procured in Favor of Executive Engineer, PH Works Division,

Jamnagar, and contractor has to produce it before entering into agreement with department,

for the full period of O&M.

 The bidders should strictly note that rate will be fixed and firm. No escalation will be given

during the maintenance period.

 The work should be carried out as per the terms and conditions laid down in the tender

 The cost of raw water, electricity will be borne by GWSSB. Further, GWSSB will supply

necessary stock of Chlorine gas at the location of chlorination plant. All other required material

for O&M work shall be brought by the contractor at his own cost including loading, unloading

and carting and the same material shall get approval from the Engineer-in-charge before use

 The cost is including all type of taxes (other than GST),octroi, freight, loading, unloading,

carting labour charges payment to labour including insurance, P.F. and all other liabilities for

the staff engaged for the O&M work.

 All replaced material (provided from the department’s store) shall be returned to department

store by the contractor at his own cost.

 Painting of overall structures: Internal/external painting of civil structures, machineries,

manifolds, valves etc.

Interior Paint: Distemper paint to all civil assets

Exterior paint: shall be acrylic emulsion paint colour (like APEX): pump house, treatment

plants, treated water pumping stations, GSRs, ESRs, sump, stores, etc all.

Oil paint colour: All type of doors, windows, ventilation, shutter, pump, motor, all valves &

equipment inside pump house, transformer yard, D.P. structure, transformer etc

Black Japan colour: air valve, sluice valve, riser pipe of air valve, zero velocity valve, butterfly

valve (outdoor), bypass arrangement etc.

Breakup of Schedule B

Part A-( Civil & Mechanical): Operation & Maintenance

Qty. Unit Item Per Amount in Rs.

Comprehensive Operation & Maintenance of

Civil & Electromechanical assets such as intake

wells/structures or offtake structures, elevated

service reservoirs (E.S.R), HGLR, sump, water

treatment plant, chemical house, staff quarters,

pump house, all bulk transmission and

A 60 Months distribution pipelines, valves, pumping machinery

& electrical equipment etc. for the Kansumra

Masitiya water supply scheme, including supply

of 6.75 MLD potable water to all the 10 villages

for 60 months period. Taluka: Jamnagar District:

Jamnagar based on NC-18. Excluding supply of

PAC, bleaching powder and chlorine gas. as per

tender specifications..

i 12 Months First Year

ii 12 Months Second Year

iii 12 Months Third Year

iv 12 Months Fourth Year

v 12 Months Fifth Year

Total-Part A= (Civil + Mechanical)

Total for Part A in. Rupees Two Crore Ninety Seven Lacks Fourty One Thousand Six Hundred Twenty

Eighty Rupees and Twenty Four Paisa Only

Part B- Maintenance (separately payable on actuals, as measured)

Qty. Unit Item Per Amount in

Inside-Outside Painting to all Functional civil

B1 (i) structures, as per schedule (1st Year & 3Rd

contract period)

a 11000.00 Sqm WTP, ESR, Sump, Compound Wall, Pump 86.38 Sqm

House etc. (1st Year)

b 11000.00 sqm WTP, ESR, Sump, Compound Wall, Pump 86.38 Sqm

House (3rd Year)

Oil paint colour: All type of doors, windows,

ventilation, shutter, pump, motor, all valves &

equipment inside pump house, transformer

yard, D.P. structure, transformer, and Air

valves etc (1st Year and 3rd Year)

2000.00 1st year and 3rd Year 59.18

Sub Total- Part B1 (i, ii)

Cleaning of Storage reservoir: UG sumps,

ESR, HGLR/ GLCC and all village level

sumps every six months(5 times in the

contract period(ones per Year)

a 5 No. Raw Water Sump 55.00 Lacs lits cap at 46888.00 No.

5 No. R.C.C.U/G Sump 25 lacs litsCap. At 21851.00 No.

5 No. Boosting Sump At Kansumara Patiya 25 21851.00 No.

b 5 No. R.C.C. ESR 10.00 lacs lits Cap. & 15 mt Ht At 5463.00 No.

Sub Total- Part B2

Total- Part B (B1+B2)

Total for Part B in Rupees Twenty Four Lacks Ninety Eight Thousand Nine Hundred Eighty Five Only

Part C- Upgradation or Repair of non-functional legacy assets

Qty. Unit Item Per Amount in

3000.00 Rmt. Providing and supplying in standard length ISI 1035.00 Rmt.

1 mark rigid unplasticised PVC pipes suitable for

potable water with ring fit joint including cost of

rings, as per IS specification no. 4985/1988

including all local and central taxes, transportation,

freight charges, octroi, inspection charges, loading,

unloading, conveyance to the departmental stores

and including cost of jointing meterial etc.

complete 250 mm Dia. PVC 6 kg/cm2

2 2.00 No. Providing and supplying IS! mark Cl D/F Sluice 15920.00 No.

Valves as per 1S:14846 (Latest Edition) of

following class and diameter including all taxes,

insurance, transportation, freight charges, octroi,

inspection charges, loading, unloading, conveyance

to departmental stores, stacking etc. complete. PN-

1 With hand wheel /cap operated (PD type short

3 6.00 No. Providing and supplying |Air valves C.I. Air valves 2496.00 No.

of approved make & quality of following class and

diameter including all faxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete. Air

valves double acting (DS2) 50 mm

4 3.00 No. Providing and supplying ISI mark Cl D/F Reflux

Valves as per 1S:5312 (Latest Edition) of following

class and diameter including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading, conveyance to

departmental stores, stacking etc. complete.

5.1 225.00 CU.M. Excavation for pipe line trenches for water supply, 89.00 CU.M.

sewerage line, manhole etc. all with shoring and

struting if required as per required gradient and line

including safety provisions using site rails and

stacking excavated stuff including up to all required

lead cleaning the site etc. complete for all lifts and

strata as specified. In all sorts of soil and soft

5.2 225.00 CU.M. In hard murrum, boulders incl. macadam road 135.00 CU.M.

5.3 225.00 CU.M. In soft rock and/or masonry in CM or L M or Lime 163.00 CU.M.

5.4 1575.00 CU.M. In hard rock and / or in C. C. 1:2:4 or RCC with 372.00 CU.M.

blasting, breaking, chiseling, or by

chiseling/breaking only

6 3000.00 RMT. Lowering, laying, fixing and jointing 51.00 RMT.

PVC/uPVC/cPVC pipes and specials of following

class and diameter including cost of conveyance

from stores to site of works including cost of

labour, material, cement solvent, giving satisfactory

hydraulic testing as per ISI code. 250 mm Dia.

7.1 5.00 No. Lowering, laying and jointing in position following 946.00 No.

C. |. / D/F Reflux valves, Butterfly valves, Sluice

valves and Air valves including cost of all labour,

jointing material, including nut bolts and giving

satisfactory hydraulic testing, etc. complete.

8 6.00 No. Erection of airvalve riser by installing new M.S 3112.00 No.

pipe of 6mm thick and 3.2mt length with necessary

fittings such as flange of appropriate 28 size,nut

bolts and embeded the pipe in R CC M;15 with

offset of 10 cm around pipe with necessary steel etc

1.00 No. Drilling of 500mm dia Horizontal borehole for 529903.00 No.

9 watermain pipeline under the railway tracks incl all

strata with requried length including fixing of

400mm dia M.S.casing pipe of minimum 6mm

thick with welding pushing etc complete Providing

& fixing various size of pipe for 193.7mm/

219.10mm/ 244.5mm dia watermain of G.I/M.S

pipe of minimum 6.3mm thick for railway permises

as per instruction & regulations of Railway

authority & under supervision of Railway authority

incl Provinding, supplying & fixing of spacer at

specified interval if required between Casing pipe

and water main, ISI make sluice valve of required

size at both side of railway boundry with

construction of brickedge pavement incl C:C

encasing 1:3:6 in 10mtr length of pipe at both side.

Incl provinding & fixing of M.S/lron Manhole

frame with cover for valve chamber with loacking

arregment etc. complete with all material labour

fabrication hydralic testing of pipe & valve etc

complete for 45 mt Length. which includes

horizontal pushing and with open excavation. For

Railway Crossing MS Casing Pipe + Water Main

10 50.69 CuM Providing C.C.M.:100 for encasing pipes using trap 3368.55 CuM

metal size 12 mm to 50 mm incl. form work curing

consolidation etc. complete for various location on

pipe line using trap metal 40 mm size

11 2061.93 CuM Refilling the pipeline trenches incl. ramming, 22.00 CuM

watering, consolidating desposal of surplus stuff as

directed within a radius of 3 km. Refilling as

Total- Part C-1

Qty. Unit Item Per Amount in

C-2 ELECTRO-MECHANICAL WORK

1 2.00 Set Supply at site, Storage, Erection, Installation, 238788.00 Set

Testing & Commissioning of Polder Type

Submersible, Non clog type with 56 LPS X

Mtr. Head x 30 HP as per IS 8034 suitable for

water having upto 10000 PPM turbidity with

suitable submersible wet type, water cooled,

squirrel cage motor to IS 9283, working on three

phase, 50 Hz +/-3%, 415V +/- 10%, AC supply,

2900 RPM synchronize speed with 10 mtr copper

conductor flat cable from pump to starter panel

with cable end terminations (4) all supports,

clamps, pipe fittings alongwith mechanical seal,

bearing bush, strainer etc. complete set & following

Casing CI, SS CF8M impeller, Bronze: wearing

ring & Bearing bush, TC mechanical seal,

CS/S.S.bearing, S.S shaft with sleeve, SS strainer &

For supply and for installation as per Mech. SOR

2022-23 section E item no. 17-(3) page no. -44

and for installation 10% of Supply rate taken.

2 2.00 Set Supply at site, Storage, Erection, Installation, 51796.80 Set

Testing & Commissioning of Horizontal type

Horizontal Monoset Sub Pump (SM) set

RPM, 3 Phase AC Supply, 50 HZ ± 3%, 415 V ±

10%, following IS 14220 along with suitable

foundation / Installation device with 15 Mtr Power

& Control cable of following material of

Construction:-Casing - C.I. FG 260, Impeller -

Bronze & Shaft- SS 410 etc as per detailed

specifications & requirement comp.

Capacity:- 1860 LPM at 34 Mts. Head with

minimum 30 HP motor ratings. (SM 4.7)

If not possible in horizontal SM pump, then vertical

SM pump will be accepted.

For supply and for installation as per Mech. SOR

2022-23 section E item no. 5-(3) page no. -36 and

for installation 10% of Supply rate taken.

3.1 36.00 Mtr Supply at Site, Storage, Erection, Installation, 1852.40 Mtr

Testing & Commissioning of MS Pipe conforming to

IS-3589-2001 or its latest revision/ammendment

including loading, unloading conveyance to site,

stacking etc. all complete.

Pipe dia in OD- 219.1 mm, Thickness- 4.5 mm

(Delivery Pipe- Lakhabaval Section & Common

Header Pipe- Dared Section)

Supply:-Civil SOR 2022-23, Sec.-A, Item

Erection:-Lab. Esti.as per 10 % of supp. cost

3.2 18.00 Mtr Pipe dia in OD- 273 mm, Thickness- 5 mm 2569.60 Mtr

(Common Header Pipe- Lakhabaval Section)

Supply:-Civil SOR 2022-23, Sec.-A, Item

Erection:-Lab. Esti.as per 10 % of supp. cost

4.1 20.00 Mtr Supply at Site, Storage, Erection, Installation, 1257.30 Mtr

Testing & Commissioning of GI Pipe conforming

to IS-1239 or its latest revision/ammendment

including loading, unloading conveyance to site,

stacking etc. all complete.

125 mm Dia Medium Duty (Delivery Pipe- Dared

Supply:-Civil SOR 2022-23, Sec.-A, Item

Erection:-Lab. Esti.as per 10 % of supp. cost

4.2 12.00 Mtr 80 mm Dia Medium Duty (By Pass Pipe- Dared 657.80 Mtr

Section & Lakhabaval SEction)

Supply:-Civil SOR 2022-23, Sec.-A, Item

Erection:-Lab. Esti.as per 10 % of supp. cost

5 500.00 Kgs. Supply at Site, Storage, Erection, Installation, 105.60 Kgs.

Testing & Commissioning of M.S. Special Such as

Suction Strainer, Flanges, Concentric / Eccentric

Nozzles, Reducer / Expanders, Bolts, Nuts,etc.

Complete. as per relevent IS Standard.

For 219.1 mm dia, 273 mm dia, 125 mm dia &

Supply:-Civil SOR 2022-23, Sec.-A, Item

No.7.1.A, Pg No.11 ( Rs. 96.00 for supply)

Erection:-Lab. Esti.as per 10 % of supp. cost

6.1 2.00 No. Supply at Site, Storage, Erection, Installation, 3658.00 No.

Testing & Commissioning of ISI mark Both End

Flanged Butterfly Valve as per IS 13095 (Latest

Edition) with sleeve of EPDM & disc, shaft &

internal partsof SS-410, of Board Approved make

to be installed on Suction MS Pipings including

cost of all labour, jointing material, including nut

bolts as per specification & requirement including

all taxes, insurance, transportation, freight charges,

octroi, inspection charges, loading,

unloading,conveyance to departmental stores/site,

stacking etc. complete.

(i) 125 mm Dia (PN 1.0 Rating) for Delivery Pipe-

For Dared Section

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-40,

item no.-15.a-(5).

6.2 3.00 No. (ii) 200 mm Dia (PN 1.0 Rating) for Delivery 6608.00 No.

Pipe(Lakhabaval Section) & Common Header Pipe

(Dared Section)

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-41,

item no.-15.a-(7).

6.3 1.00 No. (iii) 250 mm Dia (PN 1.0 Rating) for Common 9506.00 No.

Header Pipe- For Lakhabaval Section

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-41,

item no.-15.a-(8).

7.1 2.00 No. Supply at site, Storage, Erection, Installation, 7229.00 No.

Testing & commissioning of ISI Mark Both End

Flanged Swing Plate Type Dual Plate Check Valve

of Approved make to be installed on DELIVERY

MS Pipings including cost of all labour, jointing

material,including nut bolts as per specification &

requirement including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to

departmental stores/site, stacking etc. complete.

(i) 125 mm Dia (PN 1.0 Rating) for Delivery Pipe-

For Dared Section

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-40,

item no.-15.a-(5)

7.2 3.00 No. (ii) 200 mm Dia (PN 1.0 Rating) for Delivery 16671.00 No.

Pipe(Lakhabaval Section) & Common Header Pipe

(Dared Section)

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-41,

item no.-15.a-(7).

7.3 1.00 No. (iii) 250 mm Dia (PN 1.0 Rating) for Common 27705.00 No.

Header Pipe- For Lakhabaval Section

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-41,

item no.-15.a-(8).

8.1 2.00 No. Supply, installation, testing & commissioning of 4080.00 No.

flange ends Expansion Bellow as per EJMA

standards of overall length of minimum 300 mm,

designed for 15 mm axial compression and 5 mm

axial extension with tie rods etc. of following MOC

& pressure ratings. MOC: Bellows: SA 240 Gr.

304; Internal Sleeve: SA 240 Gr. 304; Weldends:

IS 2062 Gr. B; Flanges: IS 2062 Gr. B (Drilling as

per IS 1538 / IS 6392 ) & Limit Rods & Nuts: CS -

IS 1367(i) 125 mm Dia (PN 1.0 Rating) for

Delivery Pipe- For Dared Section(For Supply &

Erection:- Mech.SOR 2022-23 Sec. E Item

8.2 3.00 No. (ii) 200 mm Dia (PN 1.0 Rating) for Delivery 6216.00 No.

Pipe(Lakhabaval Section) & Common Header Pipe

(Dared Section)

(For Supply & Erection:- Mech.SOR 2022-23 Sec.

E Item No.14(A)(4),Pg. No.

8.3 1.00 No. (iii) 250 mm Dia (PN 1.0 Rating) for Common 7745.00 No.

Header Pipe- For Lakhabaval Section

(For Supply & Erection:- Mech.SOR 2022-23 Sec.

E Item No.14(A)(5),Pg. No.

9 2.00 No. Supply at Site, Storage, Erection, Installation, 3052.00 No.

Testing & Commissioning of ISI mark Both End

Flanged Sluice Valve as per IS: 14846 (Latest

Edition) of Board Approved make to be installed on

DELIVERY/Common Header MS Pipings

including cost of all labour, jointing material,

including nut bolts as per specification &

requirement including all taxes, insurance,

transportation, freight charges, octroi, inspection

charges, loading, unloading,conveyance to

departmental stores/site, stacking etc. complete.

Size: 80 mm Dia, PN 1.0 (For Dared & Lakhabaval

Supply:Civil SOR 2022-23, Sec.-A, Item No.

Erection: Civil SOR 2022-23, Sec-B, Pg no.-40,

item no.-15.a-(3).

10 6.00 Nos. Supply, Installation, Testing, Commissioning of 1412.00 Nos.

Bourdon Type Pressure Gauge, ±1% accuracy,

Direct bottom 1/2" NPT (M) process connection, IP

67, Glycerine filled, SS304 Case with Bayonet

Type Bezel, SS316 L Bourdon Tube, SS

Movement material, Aluminium dial with black

graduation on white background, Micro Zero

adjustable pointer, neoprene gasket, Blow out disc,

shatter proof glass, SS tag plate etc as per IS

(a) 150 mm Dial Size- 0 to 4 Kg/cm2- (For Dared

& Lakhabaval Section)

(Mech. SOR 2022-23 Sec. F Item No.10.1(a)-iv,

11 1.00 No. Supply, erection, testing & commissioning of single 450000.00 No.

pillar mounted Jib Crane with electrically operated

hoist, horizontal slewing arm, suitable MS pillar &

bracket, electrically operated by suitable rating

motor IP 54, control pendant & control panel as

required, brake, safety devices, cables from motor

to starter panel, foundation with anchor bolts,

painting as per IS specifications, and tested as per

Capacity- 1 Tonne with Lift 6 to 10 Mtr (3.0 Mtr

Piller Height & Arm Length as per site

Rate Not Available in SOR Hence, Taken as per

Budgetary Offer.

12 2.00 Cu. Mtr. Providing & Laying Reinforced Cement Concrete 8566.00 Cu. Mtr.

in Thrust Block/Piping/Valves Supports etc. with

Tar steel, Black Trap Kapchi as Coarse Aggreate

for Raft,Grillage Footing with Necessary Centering

Form work, Consolidating as per Directive in 1:2:4

Ratio comp. as per site requriement

(For SITC rate as per Civil SOR 2022-23 Section-

C, Item No.3(2) Page No.43 Rs.4906.00 Cum. with

form work.by adding tar sttel bar 50Kg/cum @

73.20(Civil SOR 2022-23,Section-C.Item

No.9.2,page No.45) hence (GWSSB CIVIL SOR

2022-23 Section-C, pg no.43 Item No 3.2 comes to

13.1 1.00 No. Design, Supply, Installation, Testing, 106049.00 No.

Commissioning of Full Bore Electromagnetic flow

meter with factory calibrated, Regular Power

Operated, flanged connection, Flow sensor,

Indicator, transmitter and totaliser with all

accessories viz. surge arrestor, associated cables,

cabinets, hardwares, etc complete as per following

specifications:

(i) Flow Meter/ Sensor:

DC pulsed type, IP 68 Protection, Flanged process

connection as per IS 1538 or equivalent standard,

SS304/ Metallic Alloy Flow Tube, SS316/ SS

L/ Hastelloy Sensor, SS316/ Hastelloy Grounding

Ring/ Inbuilt Grounding Electrode, Neoprene/

Polyurethane/ Hard Rubber/ Rilsan lining, SS304/

Die Cast Aluminium/ Carbon steel with

Anticorrosive Paint Coil Housing with Junction

Box, CS flanges.

(ii) Flow Transmitter/ Converter ( Remote Field

Microprocessor based, Modular design, 2 line LCD

for indication of actual flow rate, forward, reverse,

sum totaliser display, ±0.5% accuracy at 0.3 to

m/sec velocity, 4 to 20 mA with HART/Modbus

output, one scalable pulse, one status output, IP

protection, Die cast aluminium/ polycarbonate/

SS316 with Anticorrosive Paint/ PU finish with

glass window enclosure, Inbuilt EEPROM and

Data Logger, 20 meters cable length for sensor to

transmitter communication etc alongwith wall

mounted/ stand mounted cabinet.

(a) Full Bore electromagnetic Flow Meter (Regular

Power Operated) 200 mm Dia (PN 1.0 Rating)- For

Rate of Mech.SOR 2022-23 Sec. F Pg. No. 96, It.

13.2 2.00 No. (b) Full Bore electromagnetic Flow Meter (Regular 117201.00 No.

Power Operated) 250 mm Dia (PN 1.0 Rating)- For

Lakhabaval Section & Existing RWS to Filter Plant

Rate of Mech.SOR 2022-23 Sec. F Pg. No. 96, It.

13.3 1.00 No. (c) Full Bore electromagnetic Flow Meter (Regular 185900.00 No.

Power Operated) 350 mm Dia (PN 1.0 Rating)- For

Existing CWS to ESR Section

Rate of Mech.SOR 2022-23 Sec. F Pg. No. 96, It.

14.1 1.00 No. Providing and erecting Approved make Four pole 22834.00 No.

moulded case circuit breaker having breaking

capacity ICU of 50 KA. and above at 415 V. with

variable thermal & magnetic release suitable to

work on A.C.supply 50 c/s. with all internal

connections & complete erected in existing

G.M.S. housing.

Capacity:- 315 Amp ( ICU=100% of ICS only of

Cat-III ) - For Receiving Total Power of Old &

New Pumping Machinery

Rate as per R&B Ele. SOR 2021-22, Chapter-3,

Item no. 3-4-4 & 3-4-5 (Average), Cat-III, Page

14.2 1.00 No. Capacity:- 200 Amp ( ICU=100% of ICS only of 16061.00 No.

Cat-III )- (For Dared & Lakhabaval Section)

Rate as per R&B Ele. SOR 2021-22, Chapter-3,

Item no. 3-4-3, Cat-III, Page

15 180.00 Mts. Providing and erecting of PVC insulated flat 459.00 Mts.

submersible Copper cable as per detailed technical

specifications of R/C of GWSSB conforming to IS

(For MCCB to LVDB to MCC to Pump Set)

Rate as per GWSSB Elect.- Mech. SOR 2022-23,

Section-E, Item No.- 3.1(g) , Pg. No.

16 1.00 No LV POWER CONTROL CENTER (LVDB Panel) 106947.00 No

Supply at Site, Installation, Testing &

Commissioning of LV Distribution Board (LVDB)

totally enclosed, dust & vermin proof, indoor type,

fabricated from CRCA sheet steel with minimum

thickness of 3 mm for base frame/ channel/ gland

plates, 2.0 mm for load bearing members/ doors &

1.6 mm for internal partitions, minimum degree of

protection - IP 52 as per IS: 2147, suitable for

operation on 3-Phase, 4 Wire, 415V, 50Hz, Neutral

effectively grounded, with instrumentation

compartments accomodating meters, aux /

protective relays, LED type indicating lamps &

control MCBs as per IS: 13947, resin cast current &

voltage transformers as per IS: 2705, air insulated

electrolitic grade Aluminum/ Copper busbar for

three phase & neutral system, GI earth bus for

entire length, power/ control wiring using 1100V

grade, FRLS insulated copper conductor wires

conforming to IS: 694 & 8130, equipment fittings,

horizontally running busbar compartment height of

minimum 300 mm, incoming & ougoing cable

connections for 1100V grade, Aluminium/ Copper

conductor XLPE/ PVC insulated & PVC sheathed

armoured cable.

LV PCC Panel (LVDB) shall have required

incomming/outgoing modules of following type &

(a) 1 Nos. Incomers with approved Make 200 Amp,

4 Pole, Air Break Fixed MCCB conforms to IS/

IEC 60947-2 with trip free mechanism, current

limiting type with Thermal Magnetic /

Microprocessor release (O / C, S / C & E / F) with

adjustable settings & having minimum 2NO+2NC

potential free auxiliary contacts with all necessary

Electro-Mechanical protections & interlocks etc.

MCCB module, when used as Incommer(s), shall

have enclosure dimensions- 1800(H) x 600(W) x

600 (D) & following technical features: 4 Pole,

MCCB with Breaking Capacity of Icu=36 KA at

415V (Ics=100% of Icu), TM release with all

necessary electro-mechanical protections,

interlocks etc.

(b) 02 Outgoing Feeder of 125 Amp MCCB(For

Dared & Lakhabaval Section) 4 Pole, Air Break

Fixed MCCB conforms to IS/ IEC 60947-2 with

trip free mechanism, current limiting type with

Thermal Magnetic / Microprocessor release (O / C,

S / C & E / F) with adjustable settings & having

minimum 2NO+2NC potential free auxiliary

contacts with all necessary Electro-Mechanical

protections & interlocks etc. MCCB module, when

used as outgong(s), shall have enclosure

dimensions- 400(H) x 600(W) x 600 (D) &

following technical features: 4 Pole, MCCB with

Breaking Capacity of Icu=36 KA at 415V

(Ics=100% of Icu), TM release with all necessary

electro-mechanical protections, interlocks etc.

(c) 3 Nos. Outgoings each with 63A TPN MCB for

outdoor lighting (C Curve) having 10kA breaking

capacity & confirming to IS

(a) Section-E, Item No. 45( 1.13i), Pg No : 83 (Rs.

(b) Section-E, Item No. 45(1.14i), Pg No : 83(Rs.

17 2.00 Nos. SITC of LV MCC Panel totally enclosed, dust & 80296.00 Nos.

bermin proof, indoor type, minimum degree of

protection - IP 52 as per IS: 2147, operation on 3-

Phase, 4 Wire, 415V, 50Hz, Neutral effectively

grounded, with instrumentation compartments

accomodating LED type indicating lamps, control

contactors as per IS: 13947, CT of accuracy class- I

as per IS: 2705, relays, meters & control MCBs, air

insulated electrolitic grade Aluminum bus bar for

three phase & neutral system with incomming

breaker- microprocessor based Air Circuit Breakers

(electrically operated drawout type)/ air break fixed

type MCCB with trip free mechanism, current

limiting type as per IS: 8828, Motor Contractor (as

per type -2 coordination), Overload Relay with

built-in single phasing prevention feature &

auxiliary feeders as per SLD drawings, momentary

contact type push buttons, equipment fittings, bus

bars, cable boxes, cable gland, incoming & ougoing

cable connection for 1100V grade, Aluminium/

Copper conductor XLPE / PVC insulated & PVC

sheathed armoured cable, 10% spare terminals,

power wiring using 1100V grade, FRLS insulated

copper conductor wires conforming to IS: 694 &

8130, cable compartments / alleys of minimum

mm size, GI / Al earth bus bar for entire length.

MCC shall be fabricated from cold rolled, coled

annealed (CRCA) sheet steel & minimum thickness

of various members shall be as follows: Base

Frame / Channel / Gland Plate: 3 mm, Load

Bearing Members / Doors: 2 mm and Internal

Partitions: 1.6 mm.

Auto Transformer Starter with MCCB, Contactor,

O/L relay, cast resin type CT, Digital MFM,

Analogue Ammeter, SPP, Timer etc.

Capacity :- 22 KW (1W+1S)- (For Dared &

Lakhabaval Section)

GWSSB Elect.- Mech. SOR 2022-23, Section-E,

Item No.- 41.1- a, Pg. No. 72 for 22 KW (1W+1S)

18 4.00 Job Supplying & erecting earth pit of minimum bore 4546.00 Job

dia.150mm size approved make Earthing Electrode

consisting Pipe-in-Pipe Technology as per IS 3043-

1987 made of corrosion free hot dipped G.I.Pipes

having Outer pipe dia of 50mm having 80-200

Micron galvanising, Inner pipe dia of 25 mm

having 200-250 Micron galvanising, connection

terminal dia of 12mm with constant ohmic value

surrounded by highly conductive compound with

high charge dissipation suitable for following type

of applications with chamber and heavy duty

cover.(approved make OEM has to submit test

certificate) & having back filling compound of (B)

Inner chemical (CCM Compound)- Resistivity:-

W/ meter testing as per IEC 62561-2017, Voltage

drop:- < 1 volt at no load & dry form, Sulphar

content:- <2%(C) Back fill Compound :- Earthing

compound should be capable to retain moisture for

long time Necessary test report must be submitted.

(a) For Electrical Installation up to 440V in normal

soil Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

19 80.00 Mtr Providing and erecting Mains with 1.1 KV grade 111.00 Mtr

FRLS PVC insulated ISI marked stranded Copper

conductor wire in following type of pipe to be

erected in / on wall / ceiling with 2.5 sq. mm

copper conductor FRLS PVC insulated stranded

wire of green colour for earth continuity of

following size (A) With medium class Rigid PVC

pipe and accessories with medium class Rigid PVC

pipe and accessories.

a. 2 wire 4 sq.mm (with 2.5 sq.mm earth wire)

20 4.00 Nos. Supplying and erecting LED Street Light (IP-65), 4876.00 Nos.

surge protection -4KV integral and 10 kv non

integral, light must have 440 VAC line supply

protection. It should withstand 48 Hours for

VAC line supply with required fittings, connectors,

accessories etc complete. 70 Watt (Cat-II)

21 4.00 Each Supplying and erecting R&B approved make of 751.00 Each

LED Suraface mounted luminaire with rear

reflector suitable for office and laboratory

applications with 22-24 Watt LED (Cat.III) Lamp

with all required fittings, connectors, accessories

22 1.00 Nos. Providing & erecting Approved make Celling Fan 1581.00 Nos.

with double ball bearing ISI mark with condeser

A.C 230v.50 c/s 1200mm sweep complete ,canopy

and 30 cms. Dowen rod erected on existing hook or

clamp with 24/0.2 , 3 core flexible wire with

earthing with regulator, modular switch box.(Make

shall be approved by Engineer incharge)

Total- Part C-2

Total- Part C-1 + C-2

Total for Part C in. Rupees Seventy Two Lakh Twenty One Thousand Three Hundred Fifty and Sixty Six Paisa Only

Part C: Detailed BOQ

Brief note on operational issues and need for the repairs: In Kansumra-Masitiya RWSS Khara-Beraja

Village is not Getting water due to Technical Issue. As this village is located after Jamnagar Town

adjoining. Due to urbanization pipeline alignment is not possible through urban area. Total

population of this villages is 711 and its total demand is 0.372 MLD.

Abstract of BOQ for Part C

Total Estimated Cost of Part C:

Total for Part C in. Rupees Seventy Two Lakh Twenty One Thousand Three Hundred Fifty and Sixty Six Paisa Only

Part C of the price bid shall include inherited non-functional legacy assets which need to be repaired

to make the system functional and efficient. The items shall be as per the baseline assessment

carried out by the concerned DEE.

This part shall be a one-time activity. Once all assets are repaired, maintenance and upkeep of the

same will be the responsibility of O&M agency.

 Agency shall have to supply one All in one Desktop Computer and One laptop at free of cost for

P.H.W.. Division, Jamnagar.

 All in one Desktop Computer and laptop given below specification

Laptop & Windows PC Specifications

Section 1 : Windows Laptop Specifications

intel Intel i5, i7 (High performance - HX & H series), (e.g., 13620H)

AMD Ryzen 9 7950X3D

Number of cores: (more than 6)

RAM: 16 GB LPDDR5

Storage: 1 TB SSD

Operating System: Windows

Screen Refresh Rate: 120 Hz

Screen Size: 15 inch +

Connectivity: Wi-Fi 6E, USB-A, USB-C,

Peripherals: Microphone, Webcam

Software: MS Office Subscription

Warranty: 1 Year Standard Warranty

Brand/Manufacturer: Samsung, Asus, HP, Dell, Acer

Section 2: Windows PC Specifications

Intel i5, i7 (12th Gen +), H & HX series (e.g., 13620H)

AMD Ryzen 7 (Ryzen 5 and other scribbled text crossed out)

Number of cores: (8 or more than 8)

Graphics: Integrated Graphics

RAM: 16 GB LPDDR5

Storage: 1 TB SSD

Resolution: Full HD (1920 x 1080) pixel

Refresh Rate: 100 Hz +

Screen Size: 27 inch

Operating System: Windows

Connectivity: Wi-Fi 6E

Peripherals: Microphone, Webcam

Software: MS Office Subscription

Warranty: 1 Year Standard Warranty

Brand/Manufacturer: Samsung, Asus, HP, Dell, Lenovo

 Note:- The agency shall not be paid any extra amount for supply of above item. If Agency not

supplied above Item Rs. 1,80,000=00 (Rs. One lakh eighty Thousand only) will be kept in deposit

from 1st R.a bill till the said item supplied by agency