Loading…
Tenderkart now works inside Claude and ChatGPT: search and analyse tenders right from your chat
Loading…
Tender ID
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
| # | Company | Status |
|---|---|---|
| 1 | Admitted-Finance 11 753 1 HABIBULLA STREET KADAPA CUDDAPAH ANDHRA PRADESH 516001 | Y S R | ANDHRA PRADESH | 516001 | Admitted-Finance |
| 2 | Admitted-Finance 1 SADHANA SOCIETY DEV BAUG DEVBAUG BHAVNAGAR GUJARAT 364001 | BHAVNAGAR | GUJARAT | 364001 | Admitted-Finance |
| 3 | Admitted-Finance 77 KAILASH PURI BIKANER RAJ C 15 SWC JAIPUR | BIKANER | RAJASTHAN | 331801 | Admitted-Finance |
| 4 | Admitted-Finance 224 OFFICERS ENCLAVE BEHIND PLV MEMORIAL COLLAGE SHIKARGARH ARMY AREA JODHPUR RAJ 342001 | JODHPUR | JODHPUR | RAJASTHAN | 342001 | Admitted-Finance |
Tender Value
₹14.3 L
EMD Value
₹29,000
Closing Date
11 Jan 2023, 6:00 pmClosed
Eligibility, documents, scope and key termsEligibility, required documents, scope of work and key terms of this tender, in one click.
GE (AF) PHALODI
GE (AF) Phalodi
REPAIR / REPLACEMENT OF HANGER DOORS IN TECH AREA AT AF STN PHALODI
2022_MES_569041_1
8464/A/E8
Open Tender
Miscellaneous Works
Item Rate
240 days
GE (AF) PHALODI
Class E Cat a(i)
7 documents required · 7 mandatory
₹500
GE (AF) PHALODI
₹29,000
Yes
16 Jan 2023
14 Dec 2022
13 Jan 2023
14 Dec 2022
11 Jan 2023
28 Dec 2022
Amount
Dismantaling of bottom wheels of size 200X100 mm for inspection of hangars door panel and re-fixing after checking the serviceability of the wheels, bearings, shaft, nut bolts, wheel box etc complete all as specified and directed. Note:- (i) The work should be carried out by authorised aggency/ contractor which has completed work in Hangar Door field. (ii) Each panel consists two nos of bottom wheels. (iii) All the welding work included for fixing for bottom wheel is deemded to be included in quoted rates. (iv) Cost of necessary tools and plants such as ladders, hydra for repair/fixing etc shall be deemed to be included in the unit rate quoted. (v) The spare parts used for repair is measured and paid separetaly in appropriate item of schedule. Make :- RCC Eco-Build System Ltd/ Jugapro/ Anubhav Power & Control/ Kanti Automatics System.
Dismantaling of bottom wheels of size 200X100 mm for inspection of hangars door panel and refixing after checking the serviceability of the wheels consist with teeth on peripheral of wheel and directly connected to gear box through chain pully arrangement, bearings, shaft, nut bolts, wheel box etc complete all as specified and directed. Note:- (i) The work should be carried out by authorised agency/ contractor which has completed work in Hangar Door field. (ii) All the welding work included for fixing for bottom wheel is deemded to be included in quoted rates. (iii) Cost of necessary tools and plants such as ladders, hydra for repair/fixing etc shall be deemed to be included in the unit rate quoted. (iv) The spare parts used for repair is measured and paid separetaly in appropriate item of schedule. (v) Damaged peripheral teeth of wheel will be replaced with new and rate is deemded to be included in quoted rates. Make :- RCC Eco-Build System Ltd/ Jugapro/ Anubhav Power & Control/ Kanti Automatics System.
M & L for smoothing the outer rough surface of wheels by lath work or electric machine work so that wheels movement on rail track is smooth and functional complete all as specified and directed.
Supply, fabricating and fixing sheet cladding near bottom wheels (2 Nos of wheels) each of size 300mm x 100mm x 3mm of motorised hangar door panel complete all as specified and directed.
S & F in repalcement of ball bearings of each bottom wheel for suitable size and strength as per existing complete all as specified and directed.
S & F in replacement of bottom iron wheel shaft of wheels as well as nuts, bolt etc. as per existing complete all as specified and directed.
M & L for repairing of existing upper roller of hangar motorised door panel of size 70X50 mm for repair of unserviceable part and fixing after repair/servicing complete roller as per exixsting included the followings:- (i) The work should be carried out by authorised aggency/ contractor which has completed work in Hangar Door field. (ii) All the welding work included for fixing for upper roller is deemded to be included in quoted rates. (iii) Cost of necessary tools and plants such as ladders, hydra for repair/fixing etc shall be deemed to be included in the unit rate quoted. (iv) The spare parts used for repair is measured and paid separetaly in appropriate item of schedule. Make :- RCC Eco-Build System Ltd/ Jugapro/ Anubhav Power & Control/ Kanti Automatics System.
M & L for smoothing the outer rough surface of roller by lath work or electric machine work so that wheels movements on upper track is smooth and functional complete all as specified and directed.
S & F in repalcement of ball bearings of upper roller for suitable size and strength as per existing complete all as specified and directed.
S & F in replacement of top iron roller shaft of roller as well as nuts, bolt etc. as per existing complete all as specified and directed.
M & L for fixing MS supporting roller base plate of size 150 mm width, thickness 7.00mm at each door panel (7 Nos at each panel) complete all as specified and directed. Note :- (i) All the welding work included for reapir/fixing for top base plate is deemded to be included in quoted rates. (ii) The Hydra machine, Ladder, Tools etc is included in the quotated rates.
Dismantaling all the mechanical and electrical connection of Hangar Door panel for opening of chain pulley and gear assembly from bottom wheels of hanger door panel for repair/replacement of unserviceable parts such as chain, gear box, rubber, washer, nuts, bolt, iron handle suitable for gear box, Manual shaft etc and fixing after repair/repalcement & complete servicing as per exixsting included the followings :- (i) The minor/major part of gear box for repair/replacement is deemded to be included in quotated rates. (ii) All the welding work included for reapir/fixing for bottom wheel is deemded to be included in quoted rates. (iii) Cost of Necessary tools and plants such as ladders, hydra for repair etc shall be deemed to be included in the unit rate quoted.
S & F in replacement of door support top and bottom made of MS Clamp fixed/ welded on door panel as per existing shape and size complete all as specified and directed.
S & F in replacement of MS door stopper of size 300mm, 20mm thickness with rubber fixed on bottom of door panel as per existing shape and size complete all as specified and directed.
S & F in replacement of bottom door Track cleaner brush fixed on bottom of door panel as per existing shape and size complete all as specified and directed.
M & L for prepration of old epoxy PU anti static floor surface gloss surface and application of width 10cm epoxy polyurethane paint marking in white/orange/golden /yellow over & including primer as in lines, dashes, arrows, letters etc complete all as specified and directed and as per manufacturer's instruction and to the entire satisfaction of GE. Make : FOSROC/CIPY/M/S PIDILITE INDUSTRIES/APURAVA INDIA LTD.
M & L in repair for EPU based anti static flooring in patches with straight edges in hanger complete all as specified and directed and as per manufacturer's instruction consisting of following:- (i) The prepration of old surface shall be carried out throughly by cleaning of all foreign materials and dust to receive the screed. (ii) Pot & crack filling with Epoxy Resin Compound to match surface undulation of the floor. (iii) Application of low viscous epoxy primer having resin and hardner mixed and laid. (iv) Application of epoxy resin based self smoothing screed 3.00 mm thick on the clean and dry surface having high abrasion resistance spread in uniform thickness. (v) Laying of self adhesive copper tape. (vi) Application of conductive primer coat. (vii) Application of EPU based self leveling top coat of flexo hard EPU to yield an avarage thickness 2.00 mm over the primer as required., (viii) All demages by chisal during currancy of work will be make good by contractor, no extra payment will be pay for extra depth. Note :- (i) The work shall be carried out from one of the Make mentioned as under :- FOSROC/CIPY/M/S PIDILITE INDUSTRIES/APURAVA INDIA LTD. (ii) All above provisions included in quoted rate.
Dismantaling all the mechanical and electrical connection of Hanger Door panel for opening of chain pulley and gear assembly from bottom wheels of hanger door panel for repair/replacement of unserviceable part and fixing after repair/repalcement and complete servicing as per exixsting included the followings:- (i) The minor/Major part of Gear box for repair/replacement is deemded to be included in quotated Rates. (ii) All the welding work included for reapir/fixing for bottom wheel is deemded to be included in quoted rates. (iii) Cost of Necessary tools and plants such as ladders, hydra for repair etc shall be deemed to be included in the unit rate quoted.
Supply,Installating, testing and commissioning in replacement of unsrviceable main Control Board panel indoor type ,size 1000mm X 500 mm X1000 mm metal enclosed fixed type,free standing,floor mounting,compartmentalized,modular type suitable for indoor installation,factory assembled in bolted design fabricated from 2.0 mm thick CRCA sheet steel frame work and painted with two coat of synthetic enameled paint, degree of protection IP-54 as per IS-13947,consisting high conductivity bus aluminium bus bar of suitable size with heat shrinkable sleeves inculding multifunctional digital voltmeter with comprising the followings:- (i) MCB, TPN 63 Amp-01 No (ii) MCB TPN 40 Amp-03 Nos (iii) Contactor ,MNX 12, 415 V - 06 Nos (iv) Relay , 220-240 VAC -03 Nos (v) Overload Relay (14 - 23 Amps), Direct Mounting on MNX 9 - 40 A. -01 Nos (vi) Single Phase Preventer-01 No (vii) MCB-10 Amp,C Curve-01 No (viii) Indicator (RYB) -01 Set (ix) Digital Voltmeter -01 Set
Supply and Fixing in replacement of Remote panel board, indoor type ,size 600mm X 600 mm X300 mm metal enclosed fixed on wall for MS ploe with suitable arragement like nut,bolt/welding etc suitable for indoor installation,factory assembled in bolted design fabricated from 2.0 mm thick CRCA sheet steel frame work and painted with two coat of synthetic enameled paint, degree of protection IP-54 as per IS-13947,which Controls the operations of 3 Nos of 3HP existing electrical motors, Limit switchs,hooters/blinker,Emergency switchs etc complete all as specified and directed by Engineer-in-charge.The Remote panel board is directly connected with Main Control panel board through suitable size of cable and suitalble size of length and comprises the followings:- (i) Forward switch-03 Nos (ii) Reverse Switch-03 Nos (iii) Stop switche -03 Nos (iv) Forward switch indicator-03 Nos (v) Reverse switch indicator-03 Nos (vi) Stop switch indicator-03 Nos (vii) Tripping indicator-03 Nos (viii) Emergency switch-01 No Note:-(i) The Forward/reverse/Stop switches and indicators is directly linked with Limit switches and for operartion of electric driven three thase motor.
S & F in replacement, Installing, adjusting Heavy Duty Limit Switches Type NLL2 else as existing with IP 67 degree of protection for Motor operated Hanger Doors, complete all as specified and directed. Make :- BCH / Siemens / L & T
S & F in replacement,mounting and installing Hooter/Blinker on top of Hanger Panel complete all as specified and directed.
Disconnecting the unserviceable, burnt existing electric motor,3 phase,3 HP capacity from gear box of hanger doors and rewinding with super enameled copper wire of existing size & make and refix complete all as specified and directed.
Supply and Fixing in repalcement of old unserviceable copper cable confirming to IS 694:1990, FRLS ,1100 Volt 1.5 sqmm 2 core cable complete including PVC conduit which is fixed to clamp with hanger door panel or fixed on cable tray etc complete all as specified and directed by Engineer-In-Charge. NOTE :- (i) The cable is connected between limit switches and remote panel to Hooters/Blinker. (ii) Cost of Necessary tools and plants such as ladders, hydra for repair etc shall be deemed to be included in the unit rate quoted. (iii) The one unit length of PVC Conduit of size not less than 40 mm and one unit length of said 2 core cable is measured as one unit length.
Supply and Fixing in repalcement of old unserviceable copper cable confirming to IS 694:1990, FRLS ,1100 Volt 2.5 sqmm 4 core cable complete including clamping on cable tray/Door panel etc complete all as specified and directed by Engineer-In-Charge. NOTE :- (i) The cable is connected between Remote panel and Electric motor. (ii) Cost of Necessary tools and plants such as ladders, hydra for repair etc shall be deemed to be included in the unit rate quoted.
LADDOS BUILDCON
M/S HARIOM CONSTRUCTION COMPANY
KRISHNA CONSTRUCTION COMPANY
stage.html
html • 0.03 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .