8397/E8 PERIODICAL SERVICES INCL CERTAIN REPAIR MD ACCN AND CHARGES INCL MES MD AND OTM ACCN AT RTS AND DEPOT HEMPUR UNDER GE (E) BAREILLY

Amount

M&L for Preparation of old decorated surfaces of wall including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on ceiling complete all as specified and directed.

Mateirial & labour for Preparation of old decorated surfaces on walls including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks by applying white cement base putty in patches as required and one coat of white wash on walls complete all as specified and directed.

M&L for Preparation of old decorated surfaces of wall or ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails marks including over by applying white cement base putty in patches as required and one coat of oil bound distemper all as specified and directed.

M&L for complete removal of old decorated surfaces of wall or ceiling including brooming , scraping down. Smoke spot, moss, efflorescent salts, trading oil, grasy spots and stopping nails and applying two coat of oil bound distemper over & inculding a coat of white cement base putty compelet all as specified and directed.

M & L for preparation of old decorated surface of wall including brooming scrapping down, smoke spot, mass efflorescent, treding oil, greasy spots and stopping nail marks including over by applying white cement based putty in patches as required and applying two coats of exterior weather proof water base emulsion paint on wall all as specified and as directed. Make :- Asian - Apex Ultima (Finish high sheen), Berger - weather coat long life (finish - high sheen), Dulux - Weather shield Max or equivalent as approved by GE

Material and labour for complete removal of existing treatement & preparation of old decorated surfaces of external wall manually using wire brush, sand paper etc, complete all as specified and directed.

M & l for applying 1mm thick waterproofing wall putty for smooth finish on prepared surface as per item above

M & L for applying two coats of exterior weather proof water base emulsion paint over a coat of primer on new /old puttied wall surface, Make weather shield Max or equivalent as approved by GE complete all as specified directed

M & L for Preparation of newly or old plastered surfaces of walls priming plastered and other surfaces with alkali-resitant priming paint and applying two coats of cement base paint complete all as specified and directed.

M&L for Preparation of old painted surfaces of wood/wood based materials exc 10cm width or girth and applying one coat of synthetic enamel paint as directed and specified.

M&L preparation of old steel surfaces of any description over 10 cm width or girth not otherwise described and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

M&L for writing building number one templet of any size and shape with white paint engraved on existing letter/ figure over a coat of painting with black paint including prepration of surfaces etc complete all as specified and directed

S&F for PVC (SWR) pipes 110 mm bore of pipe, single socketed in any length with rubber ring joints fixed to walls including repair and replacement old pipe all as specified and directed.

S&F for PVC (SWR) bends of 110 mm bore and any radius all as specified.

S&F for Bands, straps, supports or stays for rainwater, ventilating pipes,including bolts, if required: hooks (stay), heavy, for large complete all as specified and directed.

Hacking out old broken glass ( any thickness, size, quality and description) from wooden frames/steel frames, glazed with putty or fixed with beads and Supply and fixed, 3mm sheet glass ordinary quality and glazing with oil putty in square not exc. 0.5 sqm in each pane, complete all as specified and directed.

Supply and fixing for figured glass, 3mm thick, pin head type and glazing with oil putty or beads in squares not exc. 0.50 Sqm in each pane as incl removing of existing glass if required complete all as specified and directed.

S& F in repairs GI mild steel wire cloth 0.56mm nominal dia of wire average width of aperture 1.18 mm fixed with tinned tacks or galvanized wire staple in wooden/steel door/windows etc complete all as specified and as directed by Engr-in-Charge.

Obliterating for old writing of any description and including of old/new writing of n.exc 0.10 sqm with paint to match existing work or new job of black backround with white colour numbers writing complete all as directed by Engr-in-Charge.

Taking down cement plaster of any description including raking out joints, hackisng for key, scrubbing down with water etc.

Material and labour for rendering 10 mm thick in cement and sand mortar 1:6 on fair faces of brick work or cement concrete surfaces finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying two coat of oil bound distemper over & inculding a coat of white cement base putty compelet all as specified and directed.

-Ditto- all as per Srl item No.21here-in-before, but 15mm thick in cement mortar 1:4 finished fair and even using integral waterproofing compound for wall, chajja, fins, sides including Preparation of newly plastered surfaces of walls complete. Note:-Supply only of WPC shall be measured and paid separately.

Material and labour for rendering 5 mm thick in cement and sand mortar 1:4 on concrete surfaces of ceiling finishing the surface even and smooth without using extra cement including preparation of newly plastered surfaces of walls and applying three coats of white wash complete.

supply only integral water proofing compound

Complete removal of existing treatment on old surfaces by vacuume based sanding machine, scrapping down smoke soot, moulds, moss and efflorescent salts and greasy spots, removing nails etc, M&L for applying two or more coats of 100% Premium acrylic emulsion paint having VOC less than 50gm/litre and UV resistance as per IS 15489 : 2004 . Alkali & fungal resistance, dirt resistance exterior paint oif required shade (Company Depot Tinted) with silicon additives @ 1.43 litre /10 Sqm over and including priming coat of exterior primer applied @ 0.90 litre / 10 Sqm over new / old surfaces, complete all as specified and directed including provision of scaffolding required for the treatment to external surface of building with required safety measures etc complete all as specified and as directed by Engineer-in-Charge or GE. Note : The work shall be executed stage wise and each stage approved by Engineer -in-Chargeor GE. Stage 1 : Complete removal of existing treatment. Stage 2 : Priming with exterior water based wall priming. Stage 3 : 1st Coat of exterior Arcylic emulsion. State 4 : 2nd Coat exterior Arcylic emulsion.

Notes for all items (i) Any CI/AC/PVC pipe or pipes fittings damaged during the process of work shall be replaced by new one without any extra cost to the department. The decision of GE in this regard is final and binding. (ii) The debries including vegitation plant/trees shall be deposited off at a distance exc 0.5Km not exc 1.0 km all as directed by Engr-in-charge. (iii) For deciding the girth of plant/tree the heighest shall be taken as 30cm from roof/slab/chajja. (iv) The labour employed by the contractor for carrying out the above work will be provided safety equipment and quoted shall be deamed to include the same. (v) All windows, joineries, glass, fittings, doors etc shall covered before painting the surfaces and shall be cleaned including cleaning the floors as directed by the Engr-in-charge, failing which a recoveries shall be done from RAR decided by the GE and quoted rate is deemed inclusive this provisions. (vi) All tools and plant including scaffoldings, ladders required for the above work up to 10 mtr height will be the responsiblity of contractor and quoted rate is deemed to inclusive this provisions. (vii) Contractor can not be press for any specific sites for execution sites will be provided as per ground requirement and as desided by GE and Engr-in-charge.

S S CONSTRUCTION CO (BID ID -3357293)