REPAIR REPLACEMENT OF STEEL WINDOWS VENTILATORS DOOR AND CONNECTED WORKS IN DOMESTIC AREA AT AFS KUMBHIRGRAM

Amount

Taking down chowkats or frames exceeding 1.5 SQM but not exceeding 4 SQM in each (without taking off shutters from the frame) complete all as specified and directed.

Taking down chowkhats or frames with shutters (without taking off shutters from the frame) not exceeding 1.50 Sq.m each complete all as specified and directed.

Taking down shutter of any description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

Taking down shutter of any description not exc 1 sqm each complete all as specified and directed.

Refixing in the same opening shutters of ay description exc 1 sqm but not exc 2 sqm each complete all as specified and directed.

S&F 125mmx60mm pressed steel frame for doors with one or more rebates made out of MS sheet 1.25mm thick including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

S&F 105mmx60mm pressed steel frame for doors with one or more rebates made out of MS sheet 1.25mm thick including necessary fixing lugs, hinges, lock strike plates etc complete all as specified and directed.

M&L for mild steel works as in bands, straps; hold fast; wall ties; plain angle cleats for securing purlins to rafters; Knee piece inserts; plate washers and similar small articles conforming to Fe 290 Gde-E-165 complete all as specified and directed.

M&L for PCC (1:2:4) type B1 (using 20 mm graded crushed stone aggregate) as in roof kerbs, slightly rounded or chamfered on edges, cills, steps, seismic and other similar bands, hold fast PCC bed, filling of hollow PS door frame and the like complete all as specified and directed.

S&F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge without sash bars etc with plain, chamfered or rounded, mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (a) complete all as specified and directed.

S&F 30mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauge with sash bars etc with plain, chamfered or rounded, mitred beads for securing glass etc, sizes of members of shutters all as specified in SSR part-I section 8 clause 8.24 (b) complete all as specified and directed.

S&F factory made 30 mm thick flush shutters, solid core construction, with particle board core and plywood face panels, commercial type on both sides complete all as specified and directed.

S&F PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed.

S&F factory made solid panel PVC door shutter 30mm thick (stile) consisting of frame made out of MS tube for top and bottom rails, MS frames shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stills and plain colour PVC sheet top rail, lock rail and bottom rail on either side and as gap insert for top rail and bottom rail, paneling of plain colour PVC sheet to be fitted in the MS frame welded/ scaled to the stiles and rails with suitable PVC Sheet beading and jointed together with solvent cement as per drawings and specifications as catered in SSR Part – II 2004 complete all as specified and directed.

S&F 100 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 75 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 50 mm butt hinges medium weight cold rolled mild steel complete all as specified and directed.

S&F 200mm long aluminium anodised barrel tower bolts 12 mm dia of extruded section complete all as specified and directed.

S&F 100mm long aluminium anodised barrel tower bolts 12 mm dia of extruded section complete all as specified and directed.

S&F 150mm in size aluminium handles, cast type, anodised complete all as specified and directed.

S&F 100mm in size aluminium handles, cast type, anodised complete all as specified and directed.

S&F aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy and fixed length of bolt 300 mm complete all as specified and as directed.

S&F second class hard wood small fittings such as brackets of any type, latch and hinge blocks shaped door and window stops and the like incl all necessary labours, articles not exceeding 200 Cucm each complete all as specified and directed.

M&L for preparation of new or previously untreated surfaces of wood and wood based surfaces of any description, not otherwise described over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed.

S&F galvanized mild steel wire cloth, 0.56 mm nominal dia of wire and average width of aperture 1.18mm and fixed with tinned tacks or galvanized wire staples complete all as specified and directed.

S&F 300mm mild steel ordinary rat tail rod pattern springs including roller and roller plate complete all as specified and as directed.

Hacking out old broken glass of any thickness, size quality or description from wooden frames glazed with putty or fixed with bead complete all as specified and directed.

S&F 3mm thick sheet glass, ordinary quality and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F 4mm thick figured glass, pin headed type and glazing with oil putty in square not exceeding 0.50sqm in each pane complete all as specified and directed.

S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay with glazing bars dovetailed or welded, including making good disturbed surfaces of wall in all respect as per existing finishes complete all as specified and directed.

S&F in repair steel windows with side hung shutters including projecting type hinges with steel handle and steel peg stay without glazing bars dovetailed or welded, including making good disturbed surfaces of wall in all respect as per existing finishes complete all as specified and directed.

S&F in repair steel ventilator with top hung shutters including projecting type hinges with steel handle and steel peg stay without glazing bars dovetailed or welded, including making good disturbed surfaces of wall in all respect as per existing finishes complete all as specified and directed.

S&F in repair left or right factory made mild steel handle suitable for steel window complete all as specified and directed.

S&F in repair factory made mild steel stay suitable for steel window complete all as specified and directed.

Welding in repairs exc 2.5cm but not exc 5cm in length, thickness of metal to be welded not exc 6mm complete all as specified and directed.

M&L for preparation of new steel surface over 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Taking down cement plaster on brick or stone walls, etc including raking out joints, hacking for key, scrubbing down with water complete all as specified and directed.

Demolition of brick/stone massonry work built in cement mortar as in wall including all quoins, arches, pillars etc complete all as specified and directed.

M&L for brick work with sub class ‘B’ bricks (locally available best quality) straight or curved on plan to any radius built in cement mortar (1:4) as in half brick thick wall complete all as specified and directed.

M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth (without using extra cement) including mixing of WPC as per manufacturers instructions complete all as specified and directed. Note:-Supply only WPC shall be measured and paid separately.

M&L for rendering 10 mm thick in cement mortar (1:6) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement complete all as specified and directed.

Supply only integral water proofing compound ISI marked.

Demolition of cement concrete (unreinforced) in ground floor and pavings not exc 15 cm thickness (below or above ground level) complete all as specified and directed.

M&L for PCC (1:2:4) type B0 using 12.5 mm graded crushed stone aggregate as in cills, steps, seismic and other simillar bands, plinth courses, string courses, lacing cources, parapets and railing upto 60 cm in height , copings, kneelers, appex stones bed plates, water troughs and the like including weathering slightly rounded for chamfered angles and throating including form work complete all as specified and directed.

Dismantling framed timber scantling 40Sqcm and over in section in any position complete all as specified and directed.

Dismantling of unframed fillets, rails, posts, rafters, purlins etc., under 40 Sqcm in section complete all as specified and directed.

M&L for second class hard wood in scantlings clean sawn timber framed work complete all as specified and directed.

S&F 2nd class hard wood plain fillets bullnosed splayed, chamfered or rounded on one edge or face exceeding 6sqm and not exceeding 13sqm secured with nails complete all as specified and directed.

M/S Goutam Chakraborty

Anup Kumar Paul Choudhury