Const of WSS to village Padhiun in GP Padhiun Tehsil Sadar Distt Mandi HP

Amount

Excavation in foundation and trenches in earth work upto all depth in all kinds of soil such as pick work jumper work,blasting work,chiselling of soft /hard rock where blasting is prohibited in all leads and lifts and including trimming of sides levelling of bed to correct grade stacking the excavated soil in 15cm.layers when required into plinth sides of foundation including consolidating each deposited layer by ramming and watering and then disposing oof all surplus excavated soil as directed in all leads and lifts and soring/strutting timbering and dewatering where ever required to the entire satisfaction of the Engineer-in-Charge.

Providing and laying cement concrete 1:3:6(1cement:3 sand:6 graded stone agg. 40mm nominal size) and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Random rubble masonry /polygonal rubble masonry (uncoursed brought to courses )with hard stone of approved quality in foundation and plinth including levelling up with cement concrete 1:6:12 (1cement:6 sand:12 crushed stone aggregate 20 mm nominal size) at plinth level in cement mortar 1:6 (1cement:6 sand) in all leads and lifts.

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30x30x5 mm, so as to give a fair finish including centering ,shuttering, propping etc.with wooden battens and ballies, height of propping and centering below supporting floor to ceiling not exceeding 4 meters and removal of the same for-in-situ reinforced concrete and plain concrete work in:- Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like in all leads & lifts. Vertical surface such as walls(any thickness) partitions and the like including attached pillasters, butteresses, plinth and string courses and the like in all leads & lifts.

Flat surfaces such as soffits of suspended floors, roofs landings and the like: floors etc. up to 200 mm in thickness in all leads & lifts.

Providing and laying cement concrete 1:2:4 ( 1cement:2 sand: 4graded stone aggregate 40 mm nominal size )and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-Suspended floors, roofs,landings and shelves and their supports, balconies, beams, girders, bressumers and cantilivers up to floor two level in all leads & lifts.

Providing tor steel reinforcement for RCC work including bending, binding and placing in position complete up to floor two level in all leads and lifts.

15 mm cement plaster in single coat on rough side of brick/stone masonary walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:3(1 cement:3 sand) in all leads and lifts .

Cement concrete flooring 1:2:4(1cement:2 sand:4 graded stone agg. 20mm nominal size)laid in one layer finished with a floating coat of neat cement 40mm thick in all leads and lifts.

Providing and fixing of MS Fabricated Protection Panel having size 750 mm x 750 mm made with MS Angle 40 x 40 x 4 mm for frame, MS Angle 30 x 30 x 3 mm for cover, MS Flat 25 x 5 mm for fixing of sliding door bolt and MS Sheet 3.15mm thick for protection of manhole covers of storage tanks including the cost of cutting and welding of MS angle, MS Flat & MS Sheet, embedding in RCC Slab by drilling holes in MS angle & in RCC slab, provision for providing and fixing sliding door bolt 300 x 16 mm, MS Handle 100 mm, Lock and applying a coat of red oxide paint and painting two coat with steel paint (Firoza Blue) complete job in all respect in all leads and lifts and to the entire satisfaction of the Engineer - in - Charge.

Providing and placing in horizontal layers filtering media duly graded, screened, washed and cleaned as specifed by the Engineer-in-Charge.Top Layer :- Fine Sand (Eff. Size 0.20mm to 0.40 and uniformity co-efficient 2.00 to 3.00) Screened, washed, cleaned & graded from approved quarry in all leads and lifts.

2nd Layer :- Coursed sand screened, cleaned, washed & graded 3 mm to 6 mm from approved quarry in all leads and lifts.

3rd Layer :- Bajri screened, washed and graded 6 mm to 20 mm from approved quarry in all leads and lifts.

4th Layer :-Bajri screened, washed & graded 20 mm to 25 mm from approved quarry in all leads and lifts.

5th Layer :- Brocken stone screened, washed and graded for 50 mm to 75 mm from approved quarry in all leads and lifts.

Removing dry or oil bound distemper by washing and scraping and sand papering the wall surface smooth including necessary repairs to scratches complete n all leads & lifts.

Distempering (two coats) with oil bound washable distemper of approved brand and manufacture and of required shade on ubdecorated wall surface to give an even shade over and including a priming coat with distemper primer of approved brand and manufacture after thoroubhly brushing the surface free from mortar droppings and other foreign matter and also including preparing the surface even and sand papered smooth Priming coat with distemper primer of approved brand and manufacture in all leads and lifts.

Finishing wall with water proof exterior grade emulsion of approved design (Apexultima) or its equarlied on undecorated wall surfaces (two coat) to give an even shade and final finish after after throghly cleaning the surface to remove all dirt, dust and other foreigh matter etc. including sand paper smooth complete in all leads and lifts.loose powered materils with in all leads and lifts.

Removing old paint or polish from wood and wood based surfaces with paint remover of approved brands and manufactures and making the surface even with Paint remover of approved brand and manufacture in all leads and lifts.

Applying priming coat on new wood and wood based surfaces after and including preparing the surface by thoroughly cleaning oil,grease ,dirt and other foreign matters,sand papering and knotting. Ready mixed primer paint brushing wood primer pink in all leads and lifts.

Painting one coat (excluding priming coat) on previously painted wood and wood based surfaces and other metal surfaces with enamel paint to give an even shade including cleaning of all dirt dust and other foreign matters sand papering and stopping with enamel paint other than white. Extra for every sbsquent coat of paint with ready mixed paint other than white in all leads and lifts.

Painting two coats (excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surfaces of dirt dust and other foreign matters sand papering and stopping with enamel paint other than white in all leads and lifts.

Demolition above G.L. upto floor two level i/c disposal of unservicable material with in 20 meters lead and i/c cutting the necessary reinforcement and separating out from RCC works in all leads and lifts.

Providing and laying cement concrete 1:4:8 ( 1cement:4 sand: 8 graded stone aggregate 40 mm nominal size) and curing complete excluding the cost of form work in foundation and plinth in all leads and lifts.

Providing and laying cement concrete 1:11/2 :3 (M 20) ( 1cement: 1 1/2 sand: 3graded stone aggregate 20 mm nominal size ) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work in :-In Foundation and plinth in all leads & lifts.

ii) Walls(any thickness but ot less than 0.1 mtr thickness) attached pilasters, buttresses, plinth and string courses etc. from top of foundation level up to floor two level in all leadfs & lifts.

Steel work welded in built up sections,trusses and framed work including cutting,hoisting fixing in position and applying a priming coat of red lead paint: In gratting,framed guard bar,ladders ,railing brackets and similar works in all leads and lifts.

Providing and fixing Steel fibre reinforcement concrete(SFRC)manhole cover and frame conforming to IS-12593(Part-I)1988 and IS 12592-1991 Part-II with latest ammendments 560mmdia (Medium duty)in all leads and lifts.

Providing and fixing 1.20 metre high fencing (as per approved design) 1.80 metres RCC posts 3 metre centre to centre and RCC struts with 9 horizontal lines and two diagonals of galvanised steel barbed wire (IS: 278-1962 type-I) weighing 9.38 kg/per 100 metre (Minimum) strained and fixed to posts by typing two 6 mm galvanised steel bar niles/clips with G.1 binding wire included cost of excavation , RCC post , RCC struts and straining belts and embeded in cement staples embeded in cement concrete 1:4:8 (1cement:4sand 8 stone aggregate 40mm nominal size) and ,curing complete in all respect and to the entire satisfaction of the Engineer-in-Charge in all leads and lifts.

Providing and laying cement concrete 1:6:12(1cement:6sand:12 graded stone agg.40mm nominal size)and curing complete excluding cost of form work in foundation and plinth in all leads and lifts.

Half brick masonry in common burnt clay building bricks superstructure in cement mortar 1:4(1cement:4 sand)in all leads and lifts 2nd class.

Supplying and fixing of cast iron manhole cover with 455x610 mm rectangular C.I cover (Light Duty) single seal pattern the weight of cover 23 Kg. The total weight of cover and frame to be not less than 38 Kg. complete in all leads and lifts.

Providing and fixing pressed steel doors frames manufactured from commercial mild steel sheet of 1.25mm thick including hines jump lock,jamb,beed and if required angle threshold of mild steel angle of section 50x25mm or base ties of 1.25mm pressed mild steel welded or rigidly fixed together by mechanical means,adjustable lugs with split and tails to each jamb including steel but things 2.5mm thick with guards lock strike plate and shock as specified and applying a coat of approved steel primer after pretreetment of the surface as directed by the Engineer-in-charge.Profile-A in all leads and lifts.

Providing and fixing panelled glazed or panelled and glazed shutters for doors,windows and clerestory windows including black enamelled iron butt hinges with necessary screws 40mm thick 2nd class deodar wood in all leads and lifts.

Brick work using common burnt clay building bricks in superstructure in cement mortar 1:6(1cement:6 sand)in all leads and lifts 2nd class brick.

15 mm cement plaster in single coat on rough side of brick/stone masonary walls for interior plastering up to floor two levels including arrises, internal rounded angles, chamfers and/or rounded angles not exceeding 80 mm in girth and finished even and smooth in cement mortar 1:6(1 cement:6 sand) in all leads and lifts .

6mm thick plaster to ceiling in cement mortar 1:3(1cement:3 sand)in all leads and lifts.

White glazed tiles 6mm thick in flooring treads of steps and landing laid on a bed of 12mm thick cement Mortar 1:3(1cement:3 sand) finished with flush pointing in white cement in all leads and lifts.

White glazed tiles 6mm thick in skirting risers of steps and dado 12mm thick cement Mortar 1:3(1cement:3 sand) and jointed with cement slurry in all leads and lifts.

Distempering with dry distemper of approved brand and manufacatrure(two coats)and of required shasde on undecorated wall surface to given an evcen shasde over and including primer coat of whiting after thoroughly brushing the surface free from mortar droppings and other foreign matter including preparing the surface even and sand papered smooth in all leds and lifts.

Providing and fixing MS sliding door bolts with bolts and nuts screws etc.complete 300x16mm in all leads and lifts.

Providing and fixing M.S.Tower bolts(Barrel type)with screws etc.complete in all leads and lifts.250x10mm

Providing and fixing MS handles with necessary screws etc.complete in all leads and lifts.125mm.

Painting two coats(excluding priming coat) on new steel and other metal surfaces with enamel paint to give an even shade including cleaning the surface of dirt,dust and other foreign matters sand papering and stopping with enamel paint other than white in all leads and lifts.

Providing and fixing automatic flushing cistern with a pair of CI or MS Brackets (pair) complete with fitting c/c CI syphonic apparatus, mosquito proof lid CP brass unions and coupling for connection with inlet, outlet and over flow pipe c/c cutting holes and making good the same (over flow pipe to be measured and paid for saperately):- Vitreous China (5liters)in all leads and lifts. (Cera Make).

Providng and fixing viterious china wash,down water closet squatting pan(anglo indian type WC.pan)with intergral P or S trap including jointing the trap with soil pipe in cement mortar 1:1(1cement:1 sand)seat and over to be measured and paid for separately (White colour) in all leads and lifts.

Providing and fixing 100mm size P or S trap fore water cdloset(Squatting pan)including jointing the t rap with pan and soil in cement mortar 1:1)1cement: sand)sand cast iron in all leads and lifts.

Providing & Fixing viterious china wash basin with single hole for pillar tap with C.I. or M.S. bracket painted white including cutting hole including good the same excluding fitting Cera sanitary work (cornet) white Flat back 630 mm x 450 mm.

Providing and fixing viterious china padestral for wash basin complete recessed at the basis for reception of pipe and fittings Cera sanitary work(Carnet) white(Viterious china in white colour) in all leads and lifts.

Providing and fixing of water stroage tank sintex having of capacity 500 litres with necessary fittings including over flow pipes,scour pipes etc.inlet and outlet and inside paint of required size for inlet or outlet and inside paint of approved quality complete including hoisting complete in all respects.

Providing and fixing on wall face PVC (D-Plast) rain water pipes of working pressure not less 4.5 Kg/Sqcm including fitting the joints with approved adhesive complete with in all leads and lifts and carriage of materials .110 mm nominal bore in all leads and lifts.

Providing and fixing on wall face PVC door bend (D-plast) with oval access door insertion rubber washer 3mm thick bolts and joint ISI marked complete including fixing with approved adhesive complete. 75mm nominal bore in all leads and lifts.

Providing and fixing to wall ceiling and floor galvanised mild steel tube (Medium grade) tube fitting and chamber including making good the wall ceiling and floor in all leads and lifts.15mm nominal bore in all leads and lifts .

Providing and fixing full way wheel valve 15 mm dia gun metal in all leads and lifts.

Providing and fixing cas iron spun soil waste and vantilating pipe(Lead caulked)jointy to be measured and paid for separeately)100 mm dia with C.I cowl in all leads and lifts.100 mm nominal size.

Providing and fixing brass bib tap(superior quality or heavy type ) 15mm diameter in all leads and lifts.

Providing and fixing CP brss soap dish with CP brass bracket fixed to wooden plugs with CP brass screws complete in all leads and lifts.

Wiring for light point /fan point/exhaust fan point/Call bell point with 1.5 Sqmm.PVC insulated PVC insulated heat resistant flame retardent(HRFR) and low smoke single core(flexible)copper conductor cable in PVC casing and cdapping and easrtghing the light point with 1.5 Sqmm. HRFRL/PVC insulated single core copper conductor cable as required in all leads and lifts. Group C.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed PVC conduit along with 1 No HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required.2 x 1.50 Sqmm

2 x 4.0 Sqmm

(a) Supplying and fixing 3 pin 5/6 amps.socket outlet on the exists siwtch box/covers including connections etc. as required in all leads and lifts.

b) Supplying and fixing 2 way 5/6 amps.Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc.as required in all leads and lifts.

a)Supplying and fixing 3 pin 15/16 amps.socket outlet on the exists switch box/covers including connections etc.as required in all leads and lifts.

b).Supplying and fixing 15/16 amps.Tumbler/piano type switch on the existing switch box on the switch box/cover including connections etc.as required in all leads and lifts.

Supplying and fixing wooden box of following size(Nominal)on surface or recess with suitable size of phenolic laminated sheet cover of in front as required in all leads and lifts.(a) 229 mmx102 mmx60 mm, deep

.(b) 203 mm.x152 mmx60 mm, deep

Supplying and fixing celling rose on existing junction box/wooden block including connections etc. as required

Providing and Supplying CFL 1x23 watt of reputed make in all leads and lifts.

Providing and Supplying CFL 1x5 watt in all of reputed make in all leads and lifts.

Supplying and Fixing 5 Amps to 32 Amps rating, 240 Volts, L series miniature circuit breaker of following poles in the existing MCBDB complete with connections, testing and commissioning etc. as required Cat - A. (Single Pole)

Suppplying and fixing plain pandent with 16/20mm twin twisted,flexible PVC insulated copper cable and backelite pendant holder including connections ,etc.as required on existing junction box/wooden block including connections etc as required.

Supplying and fixing of following way single pole and netural sheet steel MCB distribution board 240 volts on surface/recsessed complete with tinned copper busbar netural link,earthbar,dinbar detachable gland plates inter connection including panting earthing etc.as required busbar 8 way in all leads and lifts.

Supplying and fixing of following rating double pole, 240 volts, isolator in the existing MCB DB complete with connections testing and commissioning etc. as required (63 amp. CAT-A). in all leads and lifts.

Providing,installing ,testing and commissioniong of ceiling fan and regulator including wiring the down rod as standard length upto 30cm.with 1.5 Sqmm.PVC insulated copper conductor single core dcable etc.as required 1400mm Sweep Category A in all leads and lifts.

Providing and fixing Syska make LED tube fixture 18 watt complete in all leads and lifts.

Providing and fixing LED flood light watt mentioned below (OREVA make ) complete in all respect in all leads and lifts.

Providing and fixing two core service wire 6 sqmm thick in all leads and lifts.

Duni Chand