Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹3.5 LAccepted-Finance GROUND FLOOR THAKUR COMPLEX BASANTPUR | BASANTPUR | SHIMLA | HIMACHAL PRADESH | 171018 | ₹3.5 L | 1 | Accepted-Finance L1 |
| 2 | 3₹3.9 L+₹33,506 (9.52%)Rejected-Finance | ₹3.9 L+₹33,506 (9.52%) | 3 | Rejected-Finance L2 |
| 3 | 3₹3.9 L+₹34,793 (9.88%)Rejected-Finance | ₹3.9 L+₹34,793 (9.88%) | 3 | Rejected-Finance L3 |
| 4 | 4₹4.3 L+₹74,401.60 (21.1%)Rejected-Finance | ₹4.3 L+₹74,401.60 (21.1%) | 4 | Rejected-Finance L4 |
| Sl No | Description | Qty | Unit | RAKESH KUMAR L1 | SHRI RAM L3 | Arun Chaudhary L4 | Habib Khan L2 |
|---|---|---|---|---|---|---|---|
| 1.00 | Excavation in foundation and trenches etc. ( for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/ hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil / unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge (Pick work). | 344.52 | Cum | 375 ₹1,29,195 Lowest | 400 ₹1,37,808 | 455 ₹1,56,756.6 | 425 ₹1,46,421 |
| 2.00Providing circumferential butt welded joints by electrical arc welding to the varIous dia MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||||
| 2.01 | MSERW pipe 300mm dia 4.80mm thickness | 38 | P/joint | 1,650 ₹62,700 Lowest | 1,700 ₹64,600 | 2,050 ₹77,900 | 1,700 ₹64,600 |
| 2.02 | MSEERW pipe 200mm dia 4.80mm thickness | 31 | P/joint | 1,395 ₹43,245 | 1,300 ₹40,300 Lowest | 1,690 ₹52,390 | 1,500 ₹46,500 |
| 3.00Providing circumferential butt welded joints by electrical arc welding to the varIous dia GI pipe medium / heavy class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||||
| 3.01 | 150mm dia | 38 | P/joint | 1,100 ₹41,800 | 1,000 ₹38,000 Lowest | 1,510 ₹57,380 | 1,000 ₹38,000 Lowest |
| 3.02 | 100mm dia | 33 | P/joint | 795 ₹26,235 Lowest | 1,200 ₹39,600 | 890 ₹29,370 | 900 ₹29,700 |
| 3.03 | 80mm dia | 26 | P/joint | 600 ₹15,600 Lowest | 900 ₹23,400 | 690 ₹17,940 | 700 ₹18,200 |
| 3.04 | 65 mm dia | 34 | P/joint | 510 ₹17,340 Lowest | 800 ₹27,200 | 590 ₹20,060 | 700 ₹23,800 |
| 3.05 | 50mm dia | 32 | P/joint | 500 ₹16,000 | 500 ₹16,000 | 460 ₹14,720 Lowest | 575 ₹18,400 |
Tender Value
₹3.5 L
EMD Value
₹6,975
Closing Date
20 Jun 2026, 11:00 amClosed
Executive Engineer
Jal Shakti Division Bilaspur
Restoration of rain damages of LWSS New Bilaspur Town at Nog in Tehsil Sadar District Bilaspur (SH Repair of leakage point of various dia pipe line at various RDs at various locations by butt welding)
2026_HPIPH_136208_4
BLP-BLP-0736-NIT No. 3007-3106 Dated 08/06/2026
Open Tender
Civil Works
Item Rate
Sub Division Bilaspur Section NBT
Please refer Tender documents.
4 documents required · 4 mandatory
₹350
₹6,975
2 Jul 2026
10 Jun 2026
20 Jun 2026
10 Jun 2026
20 Jun 2026
10 Jun 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | Excavation in foundation and trenches etc. ( for pipe and pits) up to all depths and in all kinds of soils such as pick work, pick jumper work, saturated soil including bailing or pumping out of water, blasting in soft/ hard rock, chiseling/wedging out of rock where blasting is prohibited, in all leads and lifts including trimming and dressing of sides, leveling of beds to correct grade including shoring, strutting, planking timbering and dewatering wherever required, stacking usable and unusable materials/ soils separately and after laying, jointing and testing of pipes, returning the usable soils in 15 cm layers by ramming and watering and then disposing of all surplus excavated soil / unusable materials as directed within all leads and lifts including restoration of un-metalled surfaces to its original condition and including cost of diversion of traffic, night signal boards, fixing caution boards, crossing over trenches for access to houses, fencing etc. complete in all respects within all leads and lifts as per the direction of the Engineer-in-charge (Pick work). | 344.52 | Cum | - | - |
| 2Providing circumferential butt welded joints by electrical arc welding to the varIous dia MSERW pipe as per conforming to IS: 3183-2007 (latest upto date amendements of grade and wall thickness as specified below welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||
| 2.01 | MSERW pipe 300mm dia 4.80mm thickness | 38 | P/joint | - | - |
| 2.02 | MSEERW pipe 200mm dia 4.80mm thickness | 31 | P/joint | - | - |
| 3Providing circumferential butt welded joints by electrical arc welding to the varIous dia GI pipe medium / heavy class, welded in requisite number of weld runs so as to achieve the minimum effective throat thickness of weld conforming to IS: 816-1969 specifications by using welding electrodes of 2.5mm to 6.3mm of Advani Orelon (Adore)-CITOJET/ESAB make, conforming to IS: 814-1991 at site of work complete in all respect, including manual/ mechanical handling of pipe in all leads and lifts and to the entire satisfaction of the Engineer-in-charge. | |||||
| 3.01 | 150mm dia | 38 | P/joint | - | - |
| 3.02 | 100mm dia | 33 | P/joint | - | - |
| 3.03 | 80mm dia | 26 | P/joint | - | - |
| 3.04 | 65 mm dia | 34 | P/joint | - | - |
| 3.05 | 50mm dia | 32 | P/joint | - | - |
stage.html
html • 0.04 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 1.29 MB
PWD6.pdf
Tender Documents • 0.40 MB
TC.pdf
Tender Documents • 0.17 MB
BOQ_201601.xls
BOQ • 0.23 MB
PWD8.pdf
Tender Documents • 1.32 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .