CA NO GE SOUTH AMB 53 2021 2022 REPAIR TO ASBETOES SHEET ROOFING AND FALSE CEILING AT JCOs ORs ACCN OF FAFA JADUNATH ENCLAVE UNDER GE SOUTH AMBALA CANTT

Amount

Material and labour for brick work with sub class ‘B’ bricks, straight or curved on plain exceeding 6 metre mean radius in cement mortar (1:6) including demolition of brick work built in cement mortar including demolition of old brick/stone masonry built in cement mortar of any description including all quoins, archs, pillars etc complete all as specified and directed.

Material and labour for filleting in any position and to any shape in cement mortar 1:4 for fair finish to exposed surfaces of brick work including all mitres, stops, etc. complete all as specified and directed.

Taking down fan, sealing cable end, dismantling blades and removing fan and blades to store including and connecting up including provision of cable from ceiling rose or connector to fan complete all as specified and directed.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing asbestos cement (corrugated, semi corrugated, etc.) sheets any type, gauge, thickness etc complete all as specified and directed.

Supply and fixing of Pre-painted galvalume aluminum zinc coating GI based plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete including dismantling existing asbestos cement (corrugated, semi corrugated, etc.) sheets any type, gauge, thickness etc complete all as specified and directed.

Supply and fixing of rolled mild steel works as in wind ties for roof including securing with bolts including all necessary drilling, bolting or riveting, etc., and similar work conforming to Fe-290 Gde E-165 complete including dismantling or taking down of existing MS work from any position complete all as specified and directed

Taking down cement plaster of any description and in any position including raking out joints, hacking for key, scrubbing down with water etc of any thickness complete all as specified and as directed.

Material and labour for 15mm thick rendering in cement mortar (1:6) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for 15mm thick rendering in cement mortar (1:4) on brick or concrete surface of any description, finished the surface even and smooth without using extra cement complete all as specified and directed.

Material and labour for preparing of new plastered or un-decorated surfaces of walls and applying three coats of white wash on walls complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of wall and applying two coats of snowcem (cement base paint) over a coat of akali resistant primer on walls complete all as specified and directed.

Material and labour for preparation of new plastered surfaces of walls, filling grooves and applying two coats of oil bound distemper over a coat of primer complete all as specified and directed

Material and labour for preparation of old painted steel surfaces of any description over 10cm width or girth and applying one coat of synthetic enamel paint, complete all as specified and directed.

Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of cement base paint of any tint complete all as specified and directed.

Material and labour for preparation of old decorative surface of wall etc by washing rubbing down including scrapping and applying one coat of oil bound distemper complete all as specified and directed.

Dismantling wooden members in fillet, rails, posts, rafters, purlins, etc. under 40 sq. cm in section, in unframed frame etc complete all as specified and as directed.

Supply & fixing of rolled mild steel as in main and cross beams, hips and jack rafters, purlins where connected to common rafters and running rails and guides for sliding doors fixed with connecting plate or other connected plates etc. of Fe- 410W (Gde-250) quality 'B' complete all as specified and directed

Material and labour for cutting holes into or through brick walls built in cement mortar exc. half brick and not exceeding full brick for inserting hold fasts,door frames, etc and making good disturbed portion in cement mortar 1:3 or PCC 1:2:4 type B-0 using 12.5mm graded stone aggregate, complete all as specified and as directed.

Material and labour for preparation of new steel surfaces of any description not otherwise described over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of red oxide primer complete all as specified and directed.

Supply and fixing of semi perforated false ceiling 12 mm thick with micro tegular edged at all height with GRG (Glass Fibre Reinforced Gypsum) false ceiling tiles of size 595 x 595 mm of approved texture, design and pattern having moisutre content less than 2%, humidity resistance of 99%, NRC 0.60 to 0.85 as per IS 8225-1987, non combustible as per BS 475 (Part-4) 1970 and light code description unit code No 429 Sub Head 26. New Technologies and materials reflectance of 85% minimum to be laid in true horizontal level suspended on interlocking metal T -grid of hot dipped galvanised iron section of 0.33 mm thick ( galvanised @ 120 gms/ sqm incl both sides) comprising of main T- runners of size 15x 32mm of length 3000mm, cross T of size 15 x32 mm of length 1200mm and secondary intermediate cross T of size 15 x 32 mm of length 600 mm to from grid module of size 600 x 600 mm, suspended form ceiliing using galvanised mild steel items (Galvanised @ 80 gm/sqm) i.e. 50 mm long, 8mm outer diameter M-6 dash fastners, 6mm dia fully threaded hanger rod upto 1000mm length and L shape level adjuster of size 85 x 25 x 2mm. galvanised iron perimeter wall angle of size 24 x 24 x 0.4 mm of length 3000 mm to be fixed on perimeter wall / partition with the help of plastic rawl plugs at 450 mm centre to centre and 40 mm long dry wall SS screws. The work shall be carried out as per specification, drawing and as per direction of the Engineer-in-Charge including dismantling existing asbestos sheet false ceiling textile coverings including frames (if any) and cover fillets complete all as specified and directed.

Note:- Amount of credit of Rs. 1,58,900.00 for retrieved materials is mentioned in Schedule of Credit Page No. 19 of tender documents in pdf form which will be deducted offline while acceptance of tender.

m/s parmod kamar

Gupta Enterprises

Sham Sunder Bansal

OJHA ENTERPRISES

M/s B.S.Jain