PROVISION OF TOILETS AT MMT E COMPLAINT CELL AT SAILORS AREA DOLPHIN HILL SPECIAL REPAIRS TO TOILETS IN BUILDING NO 08 B OF NAD TPW LOCATED IN NAVAL DOCKYARD PROVISION OF COVERED PARKING SHED NEAR BUILDING NO P 17 AT FMU COMPLAINT CELL AT OFFIC

Amount

Surface Excavation not exceeding 30 Cm deep and averaging 15 Cm deep and getting out in Soft/ Loose soil including removing rubbish to outside MD land complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in hard/ dense soil complete all as specified and as directed.

M & L for Plain Cement Concrete Type D2 1:4:8 (using 40 mm graded stone aggregate) in foundations, filling and mass concrete complete all as specified and as directed.

Material and Labour for Walling of random rubble [ KONDALITE STONE], uncoursed, well bonded, bedded and solidly hearted, built in cement mortar 1:6 complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan exceeding 6 M mean radius built in cement mortar 1:6 complete all as specified and as directed.

M&L for RCC 1:2:4 Type B1 (using 20mm graded granite stone aggregates) as in Slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for Mild steel TMT bars 10 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

M&L for Mild steel TMT bars 6 to 8 mm dia., and over cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and Labour for rendering 15mm thick on fair faces of brick work / concrete surfaces external surfaces in cement mortar 1:4 finished fair and even with out using extra cement , including mixing of water proofing compound as per manufacturer's instructions complete all as specified and as directed. Note : Water proofing compound shall be measured and paid separately under relevant item.

M&L for Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:6 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Rendering 5 mm thick on fair faces of concrete surfaces in ceilings in cement mortar 1:3 and finished even and smooth without using extra cement complete all as specified and as directed.

M&L for Preparing newly plastered surfaces of walls and applying three coats of white wash complete all as specified and as directed.

M&L for preparing new surfaces of Ceilings and applying three coats of white wash complete all as specified and as directed.

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer over putty [any number of coats] including sand papering on external walls / ceiling surfaces to obtain smooth finish including scaffolding and safety precautions complete all as specified and as directed. Make : (i) Weather coat paint :Apex from Asian Paints / All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux (ii) Make for Putty : JK white cement / Birla wall care / Jenson & Nicholson

Supply and Fix powder coated aluminium window and ventilator shutters, fixed type without sash bars, aluminium sections weighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, complete all as specified and as directed. Make: HINDALCO / INDALCO/JINDAL

Supply anf Fix in opening Factory made solid PVC door frame of size 50 mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube manufactured as per SSR Part I specifications and drawing complete all as specified and as directed.

S&F factory made solid panel PVC door shutter 30mm thick style consisting of frame made out of MS tube for top and bottom rails.MS frame shall be covered with heat moulded plain colour PVC C channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and plain colour PVC sheet for top and lock rail and bottom rail on either side and as gap insert for top rail & bottom rail:Panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, supplying and fixing in the frame at site as per specifications complete all as specified and as directed. Note for Item No. 16 & 17 : Make of PVC frame / shutter / ventilator shall be of make : Sintex / Nandi / Rajshri Plasti Wood.

S & F 4 mm thick Figured glass, pin head type and glazing with oil putty/in aluminium sections in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

S & F [ISI marked] 100 mm long mild steel medium weight cold rolled steel Butt hinges complete all as specified and as directed

S & F [ISI marked] 150 mm long Extruded Aluminium alloy handles, fabricated type, anodised complete all as specified and as directed

S & F [ISI marked] 150 mm long Aluminium, anodised, barrel tower bolts of extruded section complete all as specified and as directed

M & L for Coloured joint free Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile not exceeding 0.11 Sq. M as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:4, 15 mm thick, complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Joint free Glazed ceramic tiles 300 x 200 x 6 to 7mm thick, on vertical surfaces such as skirting, dados and risers to steps etc., set and jointed in neat cement slurry and pointed in white or coloured cement to match including rendering 10 mm thick on fair faces of brick work or concrete surfaces as in backing coat in cement mortar 1:3 for complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M & L for hardcore of gauge not exceeding 63 mm of broken stone, deposited, spread and leveled in layers not exceeding 15 cm thick, watered and rammed to a true surface complete all as specified and as directed.

M&L for 75 mm thick PCC 1:4:8 type D-2 (40mm graded aggregate) as in sub base of floor / pavings etc complete all as specified and as directed.

M&L for 25 mm thick PCC 1:2:4 type B0 (Using 12.5 mm graded granite stone aggregate) as in sub base of floorings / hard standings complete all as specified and as directed.

75 mm thick Cement concrete type C2, 1:3:6 (using 40 mm graded stone aggregate) in sub base of flooring / hard standing / plinth protection complete all as specified and as directed.

Supply only integral water proofing compound [ISI marked] complete all as specified and as directed. Make : Acco proof / Impermo / Lik proof / Scott No. 1

S&F PVC (SWR) pipe [ ISI MARKED ] 110mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince

S & F 110 mm bore PVC ( SWR ) , [ ISI MARKED ] bends of any radius complete all as specified and as directed. Make : Supreme / Prince

S&F PVC (SWR) pipe [ ISI MARKED ] 75 mm bore single socketed with rubber ring joints fixed to walls complete all as specified and as directed. Make : Supreme / Prince

S & F 75 mm bore PVC ( SWR ) , [ ISI MARKED ] bends of any radius complete all as specified and as directed. Make : Supreme / Prince

S & F 110 mm bore PVC (SWR) Vent Cowl complete all as specified and as directed. Make : Supreme / Prince

S & F 25 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S & F Vitreous China Ware Wash hand basin white, flat back, size 630 x 450 mm size with 15 mm bore pillar taps, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and 32 mm dia., Waste fittings, brass chromium plated for glazed ware sinks, wash basins etc., with long screwed shanks and fly nuts, flange end bedded in red lead cement and other end fixed including removing the existing Basin, pillar tap and brackets and fixing new brackets complete all as specified and as directed. Make :Pillar Tap : M/s Hindware / Orient / Seiko / Dripless Make : WHB : CERA / PARRYWARE / HINDWARE,

S&F 15 mm bore Fancy type pillar taps, long swan neck type with quarter turn, Cast Copper alloy, with capstan heads, chromium plated, screwed down high pressure with or without lettered Hot or Cold with long screwed shanks and fly nuts, screwed for iron pipe and fixed complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F for Angle Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 25 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 15 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

S & F Swivel shower of PTMT any colour for fixing with 15mm pipe. (Minimum weight 40gms) complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

Supply and Fix brass chromium plated tubular towel rail 20 mm dia 'D' type 60 cm long between flanges complete all as specified and as directed.

S & F PVC connections 15 mm size with PTMT nuts of length 450 mm complete all as specified and as directed. MAKE : M/S PRAYAG, M/S POLY TUF

Supply and Fix in repairs [ ISI MARKED ]10 litres capacity PVC valveless, syphonic action type flushing cistern low level white with inlet, Ballvalve , Float Valve and handle including brackets complete all as specified and as directed . Make : SLIMLINE from PARRYWARE / HINDWARE / CERA

S & F Vitreous china urinal, bowl type, flat back, white of size 465 X 355 X 265mm, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, with grating and union for discharge pipe, complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F 15 mm bore chromium plated bib tap, cast copper alloy, with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F 75 mm PVC (SWR) nahani trap, plain with grating including jointing to waste pipe fixed in cement concrete Type B1 1:2:4 complete all as specified and as directed.

Supply and Fix 1000 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position including taking down complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

Supply and Fix 500 litres capacity Rotational moulded Polythene [HDPE] Water Tanks, [ ISI Marked ] double layered, Cylindrical & Vertical Type including provision of 20mm dia spouts for connecting inlet, outlet, over flow and washout pipes hoisted and fixed in position including taking down complete all as specified and as directed. Make : M/s SINTEX , M/s POLYCON, M/s ROTEX, M/s POLY WELL

S & F, Ball Brass Valve, suitable for 20 mm bore pipe, high pressure, with polythene float and fly nut complete, screwed for iron pipe or brass ferrule complete all as specified and as directed.

Returning, filling in, including spreading, watering and well ramming in layers not exceeding 25cm thick with soils complete all as specified and as directed.

Removing excavated soil material not exceeding 50m and depositing where directed at a lvevel not exceeding 1.5m above the starting point complete all as specified and as directed.

Use and waste formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) complete all as specified and as directed.

Supply and fix on site LLDPE septic tank designed to carry sewage and sullage water, including excavation and earth work in any type of soil, 150mm thick PCC 1:4:8 below foundation, vent shaft, connection etc, complete for 10 users with up flow filter including media complete all as specified and as directed.

M & L provision of Soakage wells of size 1.8 M dia X 3.0 M effective depth including excavation and earth work in any type of soil, foundation in 150mm thick PCC 1:3:6, 230mm Brick walls using flyash bricks of honey combed masonry with top ring of RCC 1:1.5:3 type A1 concrete including intercepting chamber of size 900mm x 750mm x 450mm effective depth and 600mm x 600mm x 450mm screen chamber made of Fly ash Brick masonary in cement mortar 1:4 over 150mm thick PCC 1:3:6 type C2 bed , 100mm thick RCC 1:2:4 Type A1cover slab / SFRC cover including interconnecting pipes of RCC/DWC pipes of suitable size complete filled with brick bats of size 40mm to 63mm size and bamboo matting complete all as specified and as directed.

S & F NP3 150 mm dia pipes laid on 150mm thick PCC bed cradle in PCC 1:4:8 type D2 including excavation and earth work for depth upto 70cm to 165cm in any type of soil, including Construction of manholes / drop manholes of suitable size proportional to depth of man hole upto 70 cm to 165 cm made of 230mm Fly ash brick masonary in Cement Mortar 1:4 over 150mm thick PCC 1:3:6 bed, plastering in CM 1:4 15mm thick mixed with water proofing compound and precast RCC 1:1.5:3 type A1 with SFRC ventilating cover and frame including all connected items and activities to make sewer line functional complete all as specified and as directed. Note: The quoted rate is inclusive of all essential Items to make the sewer line functional and the length of sewerline shall be measured for payment.

M&L for Chequered cement concrete tiles 300mm x 300mm x 25mm thick, set, jointed and pointed in neat cement slurry as in floors including and over screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Ultra, Eurocon, Duracrete, Mehatab as approved by GE.

M&L for providing precast cement concrete (1:3:6) type C-1 in kerb stones, apex stones, bed plates, pintle blocks, ancho-rage blocks, bonders (for stone wallin). corbels, brackets, etc. (of any section indicated), with plain fair faces, including chamfers, weatherings, throating etc. and setting in mortar complete with joints to match and set in cement mortar (1:4) complete all as specified and as directed.

Rough excavation not exceeding on plain area and not exceeding 1.5m deep in Hard rock complete all as specified and as directed.

Surface dressing n exc 15 cm deep in hard /dense soil complete all as specified and as directed.

Grubbing up tree trunk including cutting of trunk portion protruding over ground, digging out roots, filling holes and leveling off ground, stacking of serviceable material and removing of unserviceable material to a distance n exc. 50 m and clearing site complete all as specified and as directed.

M&L for Moorum / red bajri filling in floors or pavings, laid in layers not exceeding 15cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Removing Excavated spoil to outside MD land depositing where directed at a level not exceeding 1.50m above the starting point complete all as specified and as directed.

Forming embankments including raising (or lowering) earth, spreading in layers n exc. 30 cm thick; watering, ramming/ rolling and finishing to required size, shape, etc., upto 9 m high from base complete all as specified and as directed.

Excavating in trenches, n exc 1.5m wide and n exc 1.5m in depth; for foundation etc. or for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in hard rock complete all as specified and as directed.

M&L for RCC M-30 (design mix) as in foundations, including rafts, footings, foundations beams plinth beams, bases for columns, etc, basement slabs, under-reamed piles and mass concrete complete all as specified and as directed.

M&L for RCC M-30 (design mix) as in columns, pillars, piers, posts and struts complete all as specified and as directed. .

M&L for RCC M-30 (design mix) as in lintle beams and roof beams complete all as specified and as directed.

M&L for RCC M-30 (design mix) slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L for RCC M-30 (design mix) as in chajjas, etc complete all as specified and as directed.

Use and waste of flat Form work ( Rough finished ) to sides of concrete foundations, rafts, plinth beams and similar work, vertical or batter complete all as specified and as directed.

Use and waste of Square, rectangular or polygonal Form work ( Rough finished )to sides of pillars, posts, struts, columns and stanchions complete all as specified and as directed.

Use and waste of flat Form work ( Rough finished ) to surfaces of concrete sides and soffits of floor or roof beam, beam haunching, girders, bressummers, lintels, cantilevers, shelves including supports, overhangs, etc. also splays between floors and beams, etc. complete all as specified and as directed.

Use and waste of flat Form work ( Rough finished ) to chullah hoods, chajjas, troughs and similar items including edges and the like complete all as specified and as directed..

M&L for Mild steel TMT bars 5 to 10 mm dia., and over cut to length, bent to shape required, as in stirrups, spacers and binders including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia., or securing with clips complete all as specified and as directed.

Material and Labour for Brick work with fly ash bricks, straight or curved on plan to any radius in half brick thick walls built in cement mortar 1:4 including provision of 2Nos 8mm dia TMT bars at every fourth course complete all as specified and as directed

M&L for rendering 15mm thick in two layers, 10 mm in CM 1:6 followed by 5 mm in CM 1:4 with using water proofing compound on brick or concrete surface including finishing the surface even and smooth without using extra cement complete all as specified and as directed. Note: WPC will be measured and paid separately.

Anti termite treatment to backfill in contact with foundation at the rate of 7.5 litres of emulsion per square metre of vertical surface (Area of the sub structure in contact with backfill to be measured) complete all as specified and as directed.

Anti termite treatment to the top surface of filled earth at the rate of 5 litres of emulsion per square metre of surface complete all as specified and as directed.

Anti termite treatment to the soil under plinth protection at the rate of 5 litres of emulsion per square metre of surface area complete all as specified and as directed.

M& L for Anti Termite Treatment Treating the soil along with externel peremeter of Building at the rate of 2.25 ltrs of Emulsion per meter of perimeter wall complete all as specified and as directed.

Supply and Fix APP polymeric waterproofing membrane of 3 Kg / Sq.M incorporating a centre core of 90 micron thick HMHDPE film including coating the surface with a coat of water based bitumenous Primer @ 100 gms / Sqm, followed by a coat of blown bitumen of grade 85 / 25 or 90 / 15 @ 1.2 Kg / Sqm each at top and bottom of the membrane complete including sealing all joints by thermo fusion with minimum 10cm overlap and finished with a coat of bituminous aluminum paint @ 100 grams per Sq.m on top for water proofing treatment complete all as specified and as directed. MAKE : M/S HYPERPLAS IWL CHENNAI, M/S MULTIPLAS BY STP TEXES LIMITTED, GOREGOAN, M/S STP SUPERIOR POLY PLUS BY STP LIMITED, KOLKATTA, M/S SHIVAM TAR PRODUCTS

S & F second class hard wood, plain, solid, straight chowkats and frames, wrought, framed, rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed.

S & F 35 mm thick, Factory Made Second Class Hard Wood, Kiln Seasoned and chemically pressure treated plain framed, panelled shutter [any number of panels] with lock rail and panel of 9 mm BWP Commercial ply or 12 mm veneered particle board with commercial face veneers on both faces or 10 mm bison panel complete all as specified and as directed.

S & F 200 mm long Aluminium, anodised, barrel tower bolts [ISI marked] of extruded section complete all as specified and as directed.

S&F floor door stopper of aluminium alloy body and tongue, anodized, with hard drawn steel spring, fixed in floor, overall length of cover plate 150mm complete all as specified and as directed.

S & F 300 mm long [ISI marked] Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast Aluminium alloy, complete all as specified and as directed.

M&L for preparation of new or previously untreated wood and wood based surfaces of any description, not otherwise described, over 10cm width or girth and applying two coats of synthetic enamel paint (ordinary tint) over a coat of pink primer complete all as specified and as directed. Make: M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for PCC 1:3:6 type C1, (using 20mm graded granite stone aggregate) in bed blocks etc., including necessary form work complete all as specified and as directed.

S&F mild steel angles, bars, flats etc., as in supports for stiffening of fencing, wall ties, hold fasts, clamps and similar small articles conforming to Fe 410-O or Fe 310-O complete all as specified and as directed.

M&L for preparing newly plastered / untreated surfaces of internal walls, and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper: Asian / Nerolac / Berger (All 1st quality)

M&L for preparing newly plastered / untreated surfaces of internal ceilings, and applying two coats of oil bound distemper over one coat of alkali resistant primer complete all as specified and as directed. Make for Distemper: Asian / Nerolac / Berger (All 1st quality)

M & L for preparation of newly plastered wall surfaces and applying two coats of weather proof Acrylic Exterior emulsion paint of approved make and shade over a coat of approved primer as recommended by the manufacturer complete all as specified and as directed. Make : (i) Weather coat paint :Apex ULTIMA from Asian Paints or equivalent in All Guard from Berger, Weather Shield Max Exterior Acrylic from ICI Dulux

M & L for 25 mm thick, PCC 1:2:4, Type B0, using (12.5mm graded aggregate) as in sub base / levelling course of flooring complete all as specified and as directed.

Rendering 10 mm thick on fair faces of brick work or concrete surfaces in cement mortar 1:4 and finished even and smooth without using extra cement including mixing of water proofing compound complte all as specified and as directed..

M&L for Coloured joint free Non Skid ceramic tiles 7 to 8 mm thick (Square/ Rectangular) area of each tile exceeding 0.06 Sq. M but not exceeding 0.16 Sq. M, as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match over and including screed bed or bedding layer in cement mortar 1:6, 15 mm thick for laying floor finishes complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured joint free Non Skid ceramic tiles 600mm x 600mm x 8 to 10mm thick as in floors etc., set and jointed in neat cement slurry and pointed in white or Coloured cement to match including screed bed or bedding layer in cement mortar 1:6, 15 mm thick complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for Coloured Joint free Glazed ceramic tiles 600 x 300 x 7 mm thick, on vertical surfaces such as skirting, dados and risers to steps etc.,including 10mm rendering as in backing coat of 1:4 ,set and jointed in neat cement slurry and pointed in white or Coloured cement to match complete all as specified and as directed. Make : Johnson / Kajaria / Orient / Cera / Asian

M&L for 25 mm thick Granite (of any type) work (table rubbed and polished) in steps, jambs, pillars, window- cills, cooking platforms, wall cladding and like in cement mortar (1:3) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite over and including laying of screed bed of 15mm thick in CM (1:4) complete all as specified and as directed.

S&F in repairs sink with drain board made of stainless steel 1 mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar to dwarf wall or incl fixing cantilever brackets and connecting union to pipe overall size 915 mm x 460 mm, bowl size 405 mm x 355 mm x 160 mm fixed in repairs complete all as specified and as directed. MAKE : M/S BLUE STAR MODEL NO. BSSBSD-52, / M/S JAYNA/ NIRALI

S & F PVC (SWR) junction single, (Single 'T') equal or unequal 110 mm bore including jointing with solvent cement with access door complete all as specified and as directed. Make : Supreme / Prince

M & L for PVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement square or round mouthed, Type "S" or "P" set and jointed in Cement Mortar 1:1, PCC Base in PCC 1:2:4, Type B1, Allround Brick work in Cement Mortar 1:4, Rendering in Cement Mortar 1:4, finished even and smooth using extra cement, 50mm thick Cover Slab in RCC Type B1, 1:2:4 with 4No 8mm dia reinforcement on both directions complete all as specified and as directed.

S&F in repairs vitreous China wash down water closet pan (pedestal pattern), white (excluding fixing bolts, flushing cistern and flush pipe) complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

M&L in repair vitreous china wash hand basin , white, flat back size 550x 400 mm fixed in repairs including waste pipe, (pipe of bore 32mm) waste coupling brakets, etc. complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F brass cromium plated Health faucet, standard size, complete all as specified and directed. Make : M/s Hindware / Orient / Seiko / Dripless

S & F 900 mm long, 32 mm dia., PVC flexible Waste pipe for sinks / wash hand basins/ urinals complete all as specified and as directed.

S&F125 mm dia brass chromium plated shower rose with swivel joints complete all as specified and as directed.

S&F Aluminium frame for aluminium frame and shutter for doors, windows and ventilators including rubber beading, screws,clits, glazing clips, anodised aluminium fittings such as peg stays hinges, handles etc., with one or more rebates with powder coating of minimum 50 micron thick including joining cleat for fixing etc., complete all as specified and as directed. Make : Jindal / Indal / Hindalco

S&F powder coated alumnium grills DG-102 with F or channel over aluminium frame work all as specified and as directed.

S & F 4.8 mm thick Sheet glass, ordinary quality and glazing with oil putty/in aluminium sections in squares exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi

S&F aluminium powder coated window frame with shutters sliding pattern consisting of three tracked frame and 03 shutters (2shutters glazed with 4mm thick tinted glass fixed with suitable EPDM rubber beading and one shutter with stainless steel mosquito proof wire cloth made of 0.45mm nominal dia wire and average aperture 1.4mm) including F Aluminium powder coated grill of make "Deco grill" and DG -202 model with aperture of size 60 X 40mm, suitable 'F' or 'E' sections fixed to window frame for securing Deco grill and necessary hanbdles/locking arrangements for shutter of Jindal sections Window Frame( Top & Sides) : 21137, Bottom L 20977, Window shutters : Top & Bottom : 20567, Sides : 20738 or equivalent of Hindalco & Indalco complete all as specified and as directed.

M&L for Excavation over areas not exceeding 1.5 M deep and getting out in Hard / Dense Soil complete all as specified and as directed.

M&L for Excavation over areas not exceeding 1.5 M deep and getting out in soft/ disintegrated rock complete all as specified and as directed.

M&L for Excavation over areas depth exc 1.5 m but n.exc 3.0mdeep and getting out in soft/ disintegrated rock complete all as specified and as directed.Excavating over areas.

M & L for PCC 1:3:6 type C2 (using 40 mm graded stone aggregate) in concrete bed to drain pipes including packing under and haunching against the sides of pipes after they are laid and tested for pipes of 150 mm bore complete all as specified and as directed.

M & L for 150 mm dia reinforced concrete pipes with collars, class NP2, laid in trenches and jointed in cement mortar and tested complete all as specified and as directed.

M&L for RCC 1:11/2:3, type A-1, using 20mm graded stone aggregates slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like complete all as specified and as directed.

M&L Precast reinforced cement concrete 1:2:4 type B1 (Using 20mm graded granite stone aggregate) as in landings, cover slabs (for manholes, drains etc.) shelves and similar articles with plain faces and set in cement mortar 1:4 complete all as specified and as directed.

M&L for loose filling with Stone aggregates of gauge 80 to 150 mm in soakage pits, soakage wells complete all as specified and as directed.

S & F 40 mm bore Galvanized Steel tubes, medium grade with all fittings and fixed complete to walls and ceiling or laid in floors complete all as specified and as directed. Make : Tata / Zenith / Jindal

S&F gun metal globe or gate valves, with iron wheel head, screwed both ends for iron pipe 40 mm dia complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

Demolition of concrete of any description and in any position not otherwise specifically provided for and removing debris to out side MD land complete all as specified and as directed.

Dismantling of floor, hearth and wall tiles / stone slabs of any description or thickness as in floors, skirtings etc laid bedded and pointed in any mortar and removal of rubbish to out side MD land complete all as specified and as directed.

S&F Glazed coloured ceramic tiles in vertical surface 450 x 300x 7 mm / 350 x 250 x 7 mm thick ,set and jointed in neat cement slurry and pointed in white or cloured cement over and including 10mm thick backing coat CM of 1:4 complete all as specified and as directed. Note : Rate includes for cutting for offsets etc Make : Johnson / Kajaria / Orient / Cera / Asian

Taking down Chowkats or frames with shutters not exceeding 1.5 Sq. M but each (Without taking off shutters from the frame) complete all as specified and as directed.

Taking up or down 15 mm dia GI tubing and connections, including cleaning for re-fixing or removal to storecomplete all as specified and as directed .

Supply and lay 16 mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls / ceilings or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

Taking up or down 20 mm dia GI tubing and connections, including cleaning for re-fixing or removal to storecomplete all as specified and as directed .

S&F20mm bore CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified and as directed. Make : Astral / Flow guard

S & F in repairs 20 mm bore Gun Metal, globe or Gate Valve with Iron wheel head Screwed both ends for Iron Pipe and fixed complete all as specified and as directed. Make: Kirloskar / L & T / Upadhyay / Leader / Zolotto

M&L in repair vitreous china wash hand basin , white, flat back size 630x 450 mm fixed in repairs including PVC connection 600mm long and pvc waste pipe 75mm long 40mm dia., waste coupling brakets, etc. complete all as specified and as directed. Make :M/s. Parry ware or equivalent in M/s. Hindusthan Sanitary ware & Industries Ltd / M/s. Neycer Kemberg / M/s Cera ( All are 1st quality)

S & F in repairs Vitreous china urinal, half stall type, flat back, white, complete including providing and fixing plugs, bedding urinal against wall in cement mortar [1:2], securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement, including 32mm dia brass chromium plated waste fittings with long screw shanks and fly nuts, flange end bedded in red led cement and other end fixed, rubber plug with rings including CI Brackets, 32mm bore PVC flexible waste pipe, grating and union for discharge pipe, CP screws etc complete all as specified and as directed.

S & F in repairs CP Hand Shower Health Faucet with 8mm dia, 1.00 m long flexible tube, wall hook, non return valve complete all as specified and as directed. Make: Jaquar Allied range Model No. ALD-577 / Plumber / Parko / Jal

S & F Fancy type chromium plated 15 mm bore Stop valves, with long shank and cup (Concealed type) cast copper alloy screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F for Stop valves, cast copper alloy screwed down, high pressure, with crutch or butterfly handle, screwed both ends for 15 mm bore iron pipe or for unions, in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

M&L for Brass chromium plated, angle cock, screwed fo 15 mm bore iron pipe fixed in repairs complete all as specified and as directed. Make : M/s Hindware / Orient / Seiko / Dripless

S&F in repairs 110 mm Stainless steel grating fixed with white cement complete all as specified and as directed.

S&F 1.25mm thick steel rolling shutters, with out ball bearing, as specified including top cover anchoring rod, hasp and staple and one shop coat of primer erected in position as indicated, complete gear operated type with bevel gear box and crank handle , including S&F Safety lever locks mild steel with 4 leavers for rolling shutters and make it good adjustable for smooth functioning of rolliing shutter complete all as specified and as directed.

S&F for factory made steel ventilator with top hung shutters including hinges, steel peg stay handle complete all as specified and as directed.

Framed work such as grills, gratings, etc.. with ends of bars shouldered and/or riveted,or forged into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work con- forming to Fe.290.Gde-E-165 complete all as specified and as directed.

Galvanised mild steel wire cloth, 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from metal frames including punching or drilling out old glazing pins / spring clips complete all as specified and as directed. (Note: The rate quoted by the contractor shall be deemed to include for the necessary scaffolding that is required for working externally)

S & F 4 mm thick Sheet glass, ordinary quality and glazing with oil putty/in aluminium sections in squares not exceeding 0.5 Sq. M in each pane complete all as specified and as directed. Make: Saint Gobain / Modi Guard / Asahi (Note: The rate quoted by the contractor shall be deemed to include for the necessary scaffolding that is required for working externally)

Taking down Cement Plaster of any description on brick or stone walls or concrete surfaces etc including raking out joints, hacking for key scrubbing down with water etc and removing rubbish to out side MD land complete all as specified and as directed.

M & L for rendering to brick / concrete surfaces, 15 mm thick in Cement Mortar 1:6, surfaces finished even and smooth without using extra cement including mixing water proofing compound complete all as specified and as directed.

M& L Preparation of new or previously untreated steel surfaces of any description, over 10 cm width or girth, not otherwise described and applying two coats of synthetic enamel paint (ordinary tint) over a coat of red oxide zinc chrome primer. Make :M/s. Asian Paints [Apcolite], M/s. Berger Paints [Luxol], Jenson & Nicholson [Brolac] all are 1st quality.

M&L for preparing new plastered surfaces of wall and applying three coats of white wash complete all as specified and as directed.

Preparation of old painted surfaces of walls by washing, rubbing down and stopping of distempered and painted surfaces and applying two coat of distemper oil emulsion complete all as specified and as directed. Make for Distemper : Asian / Nerolac / Berger ( All 1st quality)

M&L for Preparing old surfaces of walls by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.

M&L for Preparing old surfaces of ceilings by brooming down or by steel wire brushing and applying one coat of white wash complete all as specified and as directed.

S &F Cast iron floor trap of 75 mm outlet plain with stainless steel anti cockroach grating arrangement including jointing to the waste pipe with run lead joint complete all as specified and as directed.

S & F Cast Iron Nahani trap of 100 mm outlet with grating including jointing to waste pipe fixed in cement concrete Type B1 1:2:4. up to 16th storey complete all as specified and as directed.

Demolition of brick work or stone / boulder masonry, built in cement mortar including all quoins, pillars etc., and disposal off unserviceable materials, debris to out side MD land complete all as specified and as directed.

Demolition of un-reinforced cement concrete in any floors and pavings not exceeding 15 cm thickness, (Below or above ground level) and disposal of unserviceable materials, debris and rubbish to out side MD land complete all as specified and as directed.

M&L for 100mm thick PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in plinth protection / floors / hardstanding complete all as specified and as directed.

Excavating in post holes (or similar holes) each n. exc. 0.5 cum, getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25 cm and removing surplus soil to a distance n exc 50m and making good surface. in hard / dense soil complete all as specified and as directed.,

M&L Steel work in tubular tru-sses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S.1161-1979 grade St.-240 painted one shop coat of redoxide primer complete all as specified and as directed.

M&L for mild steel framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete all as specified and as directed.

S & F Rolled Mild Steel work confirming to Fe 410-W, Grade-E- 250, Quality-A as in Plates [plain & chequered], Channels, Angles, square cut or notched [ordinary or counter sunk] forming holes without any attachment complete all as specified and as directed.

S & F Mild Steel work confirming to Fe - 290, Grade E-165 as in Hand Rails, half round or other stock section or core for wooden hand-rail straight portion, drilled and countersunk for Balusters Running Bars, for Doors, Balusters, Nosing to Steps including embeding in concrete and screwing etc, Wind Ties for roof including securing bolts, Posts and Struts in Fencing including cutting tops to shape as directed, bending to shape, notching for wire, drilling holes or as in flat iron fillets [for securing wire mesh and barbed wire etc] including all necessary drilling, bolting or riveting, etc and similar work complete all as specified and directed.

S & F Prepainted Galvalume Aluminium Zinc Coating GI based Corrugated Steel Sheet 0.5mm thick of any having tensile strength of 550 Mpa as in roof covering / cladding to wall, fixed with self tapping screws all as specified and as directed.

M&L for Glass dividing strips, 3 mm thick and 38mm deep inserted in position to conform to design complete all as specified and as directed.

Rough excavation not exceeding on plain area and not exceeding 1.5m deep in soft /loose soil complete all as specified and as directed.

M & L for Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depth for foundation, etc., and getting out in soft / disintegrated rock complete all as specified and as directed.

S & F GI water tubing of 25 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections and testing, complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

S & F GI water tubing of 20 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections and testing, complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

S & F GI water tubing of 15 mm bore, medium grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, ceiling or laid on floors and connections and testing, complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

M & L for Roof tiles, Mangalore pattern, interlocking at side joints, laid dry complete all as specified and as directed.

S&F of bold metallic stainless steel letters or alphabetes made with 2mm thick sheet, 25mm wide and 10mm thick ( hollow ) fixed in granite cladding elevated from surface, of letters of size 30 x 15cm complete all as specified and as directed.

S & F Bitumastic pad 25mm thick for filling in joints at crumple sections complete all as specified and as directed.

S & F 10mm thick toughened glass door including floor spring at both top and bottom and suitable handle and locking arrangement as approved by GE complete all as specified and as directed.

M&L for point wiring with two runs of single core 1.5 Sq.mm. (Nominal area) PVC insulated unsheathed multistranded copper conductor cable FRLS (ISI marked) drawn through and including non metallic PVC conduit 20 mm bore medium grade (ISI marked) concealed / surface fitted type including Flush type metal GI boxes for fixing modular type / MS sunken box for conventional type switches, sockets, regulators etc. including provision of multistranded 1.5 Sq.mm copper conductor cable FRLS [ISI marked] as earth wire connected to common earth dolly and earth in distribution board complete all as specified and as directed, for one light/exhaust fan/fan point/call bell controlled by one way switch. Make of Cable : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables Make of Conduit : Avon Plast,Precision, Finolex all are ISI marked.

All as per item No. 174 above but for one 5Amps socket on independent board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 174 above but for one 5Amps socket on same board including 1. 5 Sqmm earth continuty FRLS Copper Cable comlete all as specified and as directed.

All as per item No. 174 above but with two runs of 4.0 Sqmm FRLS copper cable for one 15 Amps, geyser/AC/ Water cooler point including 4.0 Sq mm FRLS copper conductor cable for earth continuity conductor and connecting it to earth dolly complete all as specified and as directed.

S&F Exhaust fan 230 / 240 Volts AC single phase 300 mm sweep heavy duty with louvers with specification of 1400 rpm, input watt-82W, current 0.35A, free airflow - 1950 cum/hour and noice level 45-50db complete all as specified and as directed. Make : Crompton Greaves / Bajaj / Usha

S & F LED Mirror Light "Linnet" 10 Watts copmlete all as aspecified and as directed. Make : Crompton Greaves Cat Part No LCL-10-CDL / Bajaj / Philips / Surya

S&F ceiling rose surface bakelite 65 X 50mm two to three terminals complete all as specified and as directed. Make : Cona / Anchor / Legrand

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian cat part No. 811807[Optipro] / Standard / Havells

S & F MCB SPN 40A Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811152 / STANDARD / HAVELLS/Schneider

S & F MCB SP 6 to 32 Amps, 240 Volts, C curve, complete all as specified and as directed. Make: Indo Asian Cat part No. 811122 to 811129 / L&T / C&S / Schneider / Legrand

M & L for Sub main wiring with 2 runs of 6 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 6.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly and including taking down sub main wiring complete all as specified and as directed. Note: Two runs 6 Sq.mm. cable, one run of 6 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) Make of Cable : Finolex/Polycab/Plaza/Gloster/Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 4 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 4.0 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly including taking down old submain wiring complete all as specified and as directed. Note: Two runs 4 Sq.mm. cable, one run of 4 Sq.mm cable and one run of PVC conduit will be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M & L for Sub main wiring with 2 runs of 2.5 Sqmm PVC insulated FRLS Copper conductor cable including PVC conduit of 20mm dia along with one run of 2.5 Sq.mm FRLS copper cable for earth continuity conductor as earth lead and connecting to common earth dolly complete all as specified and as directed. Note: Two runs 2.5 Sq.mm. cable, one run of 2.5 Sq.mm cable and one run of PVC conduit shall be measured as one unit. MAKE :(i) CABLE : Finolex, Polycab, Plaza, Gloster, Harsh all are ISI marked and FRLS cables (ii) PVC CONDUIT : AVON PLAST, PRECISON, FINOLEX [ALL ARE ISI MARKED]

M&L for Earthing complete with galvanized steel earth plate electrode 600x600x6 mm thick buried directly in ground (earth pit not less than 2.25 m deep below normal ground level) with top edge of the plate not less than 1.5 m below normal ground level connected to galvanized earth wire of 4 mm dia (up to 7.5 m in length from earth plate ) by means of bolts and nuts checknuts and washers of galvanized iron or steel all as specified and shown in electrical plate no.3 of SSR part I including necessary excavation and earth work in any type of soil PCC 1:3:6 type C1 chamber with RCC 1:2:4 type B1 40 mm thick cover with MS rod 8mm dia 150mm c/c reinforcement both ways, watering funnel, 20 mm dia light grade for protection of earth electrode 20 mm dia for watering complete all as specified and directed and tested on completion.

M&L for laying,testing,commisssioning of LT UG (FRLS) XLPE cable,insulated, screened,PVC bedded,galvanised steel strip or wire armoured,electric power cable(heavy duty) of 1100 volts grade,aluminium stranded conductor of size 16 sq mm 2 core laid in trenches, through pipe or duct complete all as specified and as directed. Make: Polycab / Havells / Gloster Note : Excavation, RFR and Removal of soil shall be measured and paid separately under relevant item.

Supply and fix sheet metal enclosures with 240 volts and 200 Amps rated bus bar for 8 way DBs complete all as specified and as directed.

S & F GI tubing of 40 mm bore, light grade (ISI Marked) conforming to IS - 1239 [Part - 1] including all fittings such as bends, tees, short pieces, connectors, elbows, reducers, union, sockets etc fixed to walls, or laid on floors / trenches complete all as specified and as directed. Make : Tata / Jindal / Prakash / Zenith

S&Fstepped type modular fan regulator,100 W 2 module complete all as specified and as directed. Make: MK / Anchor(Roma) / ABB (Note : Makes are required as per site requirement).

S&F switch Modular type single pole 6 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular type single pole 16 Amps One Way AC 230V, 50HZ supply 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular typeSocket 6 Amp 2/3 pin combined AC 230V, 50HZ supply 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F switch Modular typeSocket 6/16 Amp 2/3 pin combined AC 230V, 50HZ supply 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 1 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 2 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 3 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 4 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F modular white cover plate with frame 6 module complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F Modular Metal Flush Box, 1/2/3 Module, complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F Modular Metal Flush Box, 4 Module, complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S& F Modular Metal Flush Box, 6/8 Module, complete all as specified and as directed. Make : Legrand / Crabtree / Anchor (Roma) / MK

S&F CUB LED 30 W street light, pressure die cast housing with epoxy powder coated dark graphic grey colour finish prismatic poly carbonate cover with individual LED lensus IP-65 protection with all accessories including 1.5m long 40/32mm dia GI pipe bent to shape MS flat bracket mounting clamps. bolt, nuts and washers, 1 sqmm weather proof 3 core FRLS grade copper conductor to fittings including taking down existing lighting fitting complete all as specified and as directed. Make:CG cat part No. LSTS-30-CDL or equivalent in Bajaj / Surya / Havells / Philips / Wipro / GE

S&F Distribution Board, SPN 12 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F surface batten for 1 x 20 Watt LED tube light with PC body all accessories internally prewired and including connecting up with twin core twisted copper conductor cable with suitable size of make CG cat part No. IGP131LT8-16 or equivalent in syrya / bajaj/wipro/ Havells/GE

S&F LED tube rod 20W with retro LED t8 (PC) bar professional WH 5700K of cool white Make CG cat No.LT8-20-865-2 or equivalent in Surya / Bajaj/Wipro/GE/Havells

S&F Ceiling fan complete with electronic type regulator and accessories 230 V, 1200mm sweep, BEE 5 star rated Make CG / Bajaj/Havells

M&L for laying,testing,commisssioning of LT UG (FRLS) XLPE cable,insulated, screened,PVC bedded,galvanised steel strip or wire armoured,electric power cable(heavy duty) of 1100 volts grade,aluminium stranded conductor of size 10 sq mm 2 core laid in trenches, through pipe or duct complete all as specified and as directed. Make: Polycab / Havells / Gloster Note : Excavation, RFR and Removal of soil shall be measured and paid separately under relevant item.

S & F MCB SPN 32A Amps 240 Volts C curve, complete all as specified and as directed. Make: Indo Asian / STANDARD / HAVELLS/Schneider

S&F Distribution Board, SPN 8 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

S&F Distribution Board, SPN 4 Way ,Double door 240V with 200Amps rated bus bar complete all as specified and as directed. Make : Indo Asian / Standard / Havells

Supply and lay un reinforced precast concrete cable covers fonfirming to IS 5820-1970 class LV Type 2 Flat of size 230 x 150 x 70mm trenches as protection to cable complete all as specified and as directed.

Supply and spreading clean dry sand as in cable cushioning in trenches complete all as specified and as directed. (Note: Punned thickness only shall be measured)

PVGSN RAJU

K SATYANARAYANA ENTERPRISES

SRI SURYA PROJECTS

SRI GOWRI ENGINEERING WORKS

D.CH.SURYA PRAKASH

P JAGANNADHA RAJU

K K INFRA

Sri Vayuputra Constructions