GENERAL RM 2025 26 RC 2 Phase1 ZONE 4 Having 14 500Km Road Length One Year Running Contract for Various 2 Road Streches Under Ezhukone Roads Section in Kollam District General Civil Work

Amount

1.Appendix A Reactive maintanance(Initial Rectification Works)

3.6:Excavation for roadwork in soil with hydraulic excavator of 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requirements of lines, grades and cross sections, and transporting to the embankment location within all lifts and lead upto 1000m

OD154540/2024-2025:Filling up potholes with bituminous ready mix compound (25kg bag ) and compacting by ramming to get a compact surface including cost of materials. laying charges, transportation to site etc complete .( rate is arrived for a bag of 25kg)

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

OD178338/2024-2025:Providing and fixing of DLP board for Running Contract work with non reflectorised Vinyl Sign with 1 years warranty manufactured Vinyil Printing sheeting fixed over aluminium sheeting, 2 mm thick/ aluminium composit material sheeting 4 mm thick with area not exceeding 0.9 m2 with suitable back supporting frame of MS angle 40 x 40 x 6 and supported on GI pipe pole 50mm NB confirming to IS 1239 firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete min size 45 cm x 45 cm x 60 cm, 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer as per approved drawing and clause 801 including lettering symbols etc.

10.5.1b:Removal of all failed material, trimming of completed excavation to provide firm vertical faces, cleaning of surface, painting of tack coat on the sides and base of excavation as per clause 503, back filling the pot holes with hot bituminous material as per clause 504, compacting trimming and finishing the surface to from a smooth continuous surface, all as per clause 3004. 2 Filling Port holes and Patch Repairs with Bituminous concrete For grading II- 13 mm (Nominal size) Material

2.Appendix B Premonsoon Works

OD154536/2024-2025:Engaging mazdoor for lowering side berms , clearing side berms, clearing side drains , removing silt from cuverts,cutting earthern drains, diverting blocked water , removing the branches of trees leaned towards the road threatening pedestrians and traffic ,removal of fallen trees or branches on the road clearing traffic blockage stack the wood at suitable place and various work as directed by engineer in charge etc.

OD154537/2024-2025:Skilled labour engaged for cutting trees and branches

OD154538/2024-2025:Engaging Tipper for Conveying Materials ,debris to places as directed by departmental officers in charge.

OD154539/2024-2025:Engaging Hydraulic Excavator of 1cum bucket for various works as directed by the officer in charge

2.3.2.A:Clearing and grubbing road land including uprooting rank vegetation, grass, bushes, shrubs, saplings and trees girth up to 300 mm, removal of stumps of trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, up to a lead of 1000 metres including removal and disposal of top organic soil not exceeding 150 mm in thickness In area of light jungle - By Mechanical Means

55.15:Refurbishment of existing signboardsRefurbishment of existing signboards of all size except gantry mounted ones to their original reflectivity & position by removing obstructions like overgrowth vegitation etc ,if any,washing the signboards with water & soap solution to remove all dirt, oil etc. , correcting any dislocations including minor repairs, replacement of lost nut and bolts etc complete.

Appendix C :Proactive / Preventive Maintenance

4.1.B.1:Construction of granular sub-base by providing graded material, spreading in uniform layers with a motor grader on a prepared surface, mixing by mix in-place method with rotavator at OMC, and compacting with a vibratory roller to achieve the desired density, complete as per clause 401. Grading-V - For sub-base cum drainage layer - Mix in Place Method

12.4:Plain cement concrete 1:3:6 nominal mix in foundation with crushed stone aggregate 40 mm nominal size mechanically mixed, placed in foundation and compacted by vibration including curing for 14 days.

12.8.1.C:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications RCC Grade M20 - Using Concrete Mixer - (Without formwork)

10.3:Maintenance of Earth Shoulder (stripping excess soil) from the shoulder surface to achieve the approved level and compacting with plate compactor

12.8.1.C.1:Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications <br> RCC Grade M20 - Using Concrete Mixer <br>

55.25:Lifting, conveying and fixing the newly casted RCC covering slabs of any thickness on top of drain in position including all labour charges and miscellaneous expenses etc complete

OD178295/2024-2025:Engaging labour with passenger car not less than 1000 cc for Conducting and Reporting Routine Inspection upto 20 Km per day for the entire length of the project Road frequency of 7 days throughout the agreement period of the Running Contract as directed by the departmental officers .

OD178326/2024-2025: Providing and fixing Convex mirror 100mm diameter supported on GI pipe pole 65mm diameter NB confirming to IS 1239 n firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete min size 45cm x 45cm x 60 cm below ground level including painting all exposed surface with 2 coats of epoxy painting over epoxy primer

12.40:Supply, Fitting and Placing un- coated HYSD bar Reinforcement in Foundation complete as per Drawing and Technical Specifications

Appendix D : Emergency Work

OD178360/2024-2025:Engaging Mazdoor for various Emergency works as directed by the Departmental Officeres in charge

55.10.2:Providing and erecting retro-reflectorised Object Hazard Marker 450mm x 900mm Providing and erecting retro-reflectorised Object Hazard Marker sign with 07 years warranty, manufactured as per IRC 67 USING Type IV ASTM D 4956-09 micro prismatic retro reflective sheeting fixed over aluminium sheetig, 2 mm thick / aluminium composit material sheeting 4 mm thick with suitable back support frame and supported on a mild steel angle iron post 75mmx75mmx6mm, firmly fixed 30cm above ground level by means of properly designed foundation with M 15 grade cement concrete 30cmx30x45cm, 45cm below ground level including painting all non-reflective faces with epoxy paint 2 coats over epoxy primer as per approved drawing and clause 801. 450mm x 900 mm

8.15:Supplying and installation of delineator (Roadway indicators) posts 80- 100cm high above ground level, pained black, and white in 15 cm wide strips, fitted with min. 80 x 100 mm rectangular or 75 mm dia circular retro reflectorized panels at the top with minimum visibility of 300m with provisions to prevent edge lifting and vandalisam, and conforming to clause 806 , IRC-79 and the drawings including fixing to ground (The deleniator shall be of approved type as per specification)

SANTHOSH M K (BID ID -2340715)

RAJANDRA PRASAD K (BID ID -2342098)

Bidder Name

SANTHOSH M K

AANVI CONSTRUCTIONS

RAJANDRA PRASAD K