2059 P.W. M&R S.R.

Name of work: Replacing Old & u/s Cubical Panel in M.G. Hostel , Pathikashram , Manoharsinhji Hostel and Other Residential Site of Section 1 to 4 at

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Replacing Old & u/s by providing and erecting Mains with ISI

marked, 1.5kV grade electrolyte multi stranded, annealed

copper conductor with heat resistant PVC insulated conforms

Rupees Eight Hundred

to IS 694, IEC - 227 erected in existing pipe of following size

1 4.00 Mtr 837.29 ThirtySeven Paise

(Specifically for control panel, relays, power switchgears,

TwentyNine Only

motor starters & control wiring) with required size of copper

lugs, nuts and bolts if required.(k) One wire 70.00 sq. mm

(i) One wire 35.00 sq. mm Rupees Three Hundred

48.00 Mtr 376.73 SeventySix Paise

SeventyThree Only

(f) One wire 10.00 sq. mm Rupees One Hundred

92.00 Mtr 115.14 Fifteen Paise Fourteen

(e) One wire 6.00 sq. mm Rupees Seventy Paise

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 25 KA. at

415 V,having normal current rating up to 25 A to 100A. with Rupees Six Thousand

2 5.00 Ea Fixed thermal & magnetic release suitable to work on A.C. 6790.23 Seven Hundred Ninety

supply 50 Hz. with all internal connections, spreader tinned Paise TwentyThree Only

copper & complete erected in existing 16 G.M.S. housing.

ICS=100% of ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA. at

415 V. having normal current rating 125A. with Fixed thermal Rupees Eight Thousand

3 5.00 Ea & magnetic release suitable to work on A.C.supply 50 Hz. with 8861.74 Eight Hundred SixtyOne

all internal connections, spreader tinned copper & complete Paise SeventyFour Only

erected in existing 16 G.M.S. housing. ICS=100% of

ICU only Cat III

Providing and erecting Approved make Four pole moulded

case circuit breaker having breaking capacity ICU of 35 KA.

and above at 415 V . having normal current rating 250A. with Rupees TwentyThree

4 1.00 Ea variable thermal & magnetic release suitable to work on 23041.13 Thousand FourtyOne

A.C.supply 50 Hz. with all internal connections, spreader Paise Thirteen Only

tinned copper & complete erected in existing 16 G.M.S.

housing. ICS=100% of ICU only Cat III

Replacing Old & u/s by Supplying and erecting triple pole &

neutral 440V / 500V panel mounting Copper Busbars with four

equal Nos. of electrolyte bus having current density not more

than 1.6 Amp. / sq.mm (Rated current / cross section area) duly Rupees One Thousand

5 2.50 Rmt wrapped with colour insulating tape for phase sequence of 1961.42 Nine Hundred SixtyOne

following current carrying capacity, erected with necessary bus Paise FourtyTwo Only

bar supports /insulators, main cable socket to each bar, erected

in existing cubical panel with necessary connections.(A)

Suitable for 100 Amp. Capacity

(B) Suitable for 200 Amp. capacity Rupees Three Thousand

1.00 Rmt 3202.71 Two Hundred Two Paise

SeventyOne Only

(C) Suitable for 300 Amp. capacity Rupees Four Thousand

0.50 Rmt 4909.61 Nine Hundred Nine Paise

Replacing Old & u/s by Providing & erecting 415 V MCB

Rupees Seven Hundred

Four Pole for Motor & Inductive Load (C Curve) having

6 18.00 Ea 736.29 ThirtySix Paise

10KA breaking capacity & confirms to IS :8828 in existing box

TwentyNine Only

having following capacity (b)40 Amp. Cat.III

(c)63 Amp.Cat.III Rupees Eight Hundred

Eleven Paise Three Only

Replacing Old & u/s by Providing & erecting 240 V MCB

Rupees Three Hundred

double pole switch for lighting Load (B Curve) having 10 KA

7 79.00 Ea 325.22 TwentyFive Paise

breaking capacity & confirms to IS : 8828 in existing box

having following capacity (B) 40 Amp. Cat.III

providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on Rupees Two Thousand

8 3.00 Ea single phase 240 V,50Hz. having characteristic of quick action 2458.34 Four Hundred FiftyEight

& tripping with all advance feature & do not incorporate any Paise ThirtyFour Only

electronic component. for following Max. rating erected as

directed (ii) 40Amps. DP Cat. III

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

Providing and erecting Approved make RCCBs conforming to

IS: 12640 and having sensitivity of 30 mA and Short Circuit

withstand capacity of 10 KA and suitable for operation on 3 Rupees Two Thousand

phase and neutral 415V,50Hz. having characteristic of quick Eight Hundred

action & tripping with all advance feature & do not incorporate TwentyFive Paise

any electronic component for following Max. rating erected as NinetyEight Only

directed. (i) 25 Amps.FP Cat. III

Providing , erecting , fabricating the M.S. structure as per

requirement on site incorporating proper size of M.S.

angles,square,round, flats, bars, channels, sections complete

Rupees SeventySeven

10 240.00 Kg with cutting, welding, grinding & finishing duly painted with 77.77

Paise SeventySeven Only

one coat of red oxide with erection on site as per direction of

engineer in charge with necessary grouting, cementing,

plastering & finishing complete.

Supplying & erecting earth pit of minimum bore dia.150mm

size approved make Earthing Electrode consisting Pipe-in-Pipe

Technology as per IS 3043-1987 made of corrosion free hot

dipped G.I.Pipes having Outer pipe dia of 50mm having 80-

200 Micron galvanising, Inner pipe dia of 25 mm having 200-

250 Micron galvanising, connection terminal dia of 12mm with

constant ohmic value surrounded by highly conductive

compound with high charge dissipation suitable for following

type of applications with chamber and heavy duty cover.

(A)(approved make OEM has to submit test certificate

including value of earth resistance of installation duly stamped

and signed by agency and officer Incharge has to ensure the

value of earthing resistane mentioned in test Certificate) &

having back filling compound of

(B) Inner chemical (CCM Compound)- Resistivity:- 0.2 ohm /

meter testing as per IEC 62561-2017, Voltage drop:- < 1 volt at

no load & dry form, Sulphar content:- <2%(C) Back fill

Compound :- Earthing compound should be capable to retain Rupees Four Thousand

8.00 Ea moisture for long time Necessary test report must be submitted 4591.46 Five Hundred NinetyOne

by Agency. (a) For Electrical Installation up to 440V in normal Paise FourtySix Only

Length of pipe - 1 Mtr

Back filling compound - 1 Nos Bag of 15 Kg.

Replacing Old & u/s by Providing & erecting weather proof,

dust & vermin proof, floor mounted front operated indoor type

cubical panel board necessary IP-42 and above protection as

per approval from engineer incharge made from 14 SWG thick

CRC M.S. sheet for outer body & doors, 16 SWG thick CRC

M.S.sheet for internal partitions with necessary accesories

supporting angles/ flats channel including cutting, bending,

drilling, welding, riveting with internal partitions & cable alley

as per requirements & instruction of engineer-in-charge with

supplied switch gears, BUSBARS, suitable size of inter

connecting PVC copper wire / copper-aluminium strips, rubber

grommets, rib, bakelite control fuses/MCB for measuring

instruments, earth bus & earth bolts, foundation flange - bolts-

base Plates, sufficient nos. of hinged doors, handles with

locking arrangement and rubber gasket,heavy duty end

terminal connection,danger notice board,necessary

ventilation,earthing strip complete. The Panel shall be painted

with epoxy powder coating. (The rates excludes the cost of

switchgears, bus bars, inter connecting mains & Copper

Aluminium strips, meters, Fuses etc. The dimension shall be

measured excluding base beams) The panel shall be supplied

with following approved manufacturers with following size.

Item Quantities estimated Item of work Tendered Rate Total amount

Item Quantities estimated Item of work Tendered Rate Total amount

No. but may be more or according to

In Figures In Word

Qty. Unit estiamted

(B) The standard companies switch gear shall be used and only Rupees Fourteen

10.12 Sq.mtr manufacturers at CPRI approved factory (i) with 350mm depth 14902.55 Thousand Nine Hundred

Two Paise FiftyFive Only

Rupees Four Lakh Fourteen Thousand Seven Hundred FiftyTwo Paise FiftySix Only

Note:- The Credit of dismentalled materials for Rs.8498.00 shall be recovered from the First R.A. bill payable to the contrator and there after the

dismentalled materials shall be the property of the contractor.

I/We am/are willing to carry out the work at__________________% above/below (in figures)_____________________________________percent Above / below (in

words) the estimated rates mentioned above amount of my\our tender works out as under :-

Estimated amount put to Tender Rs. _________

Deduct________% below Rs. _________

Net Amount Rs. _________

Estimated amount put to Tender Rs. _________

Net Amount Rs. _________

A I/We hereby declare that I/we have visited the site and fully acquainted my self / our selves with the local situation regarding material,labour and

other factors pertaining to the work before submitting this tender.

B I/We hereby declare that I/we carefully studied the conditions of contract, detailed technical specifications and other tender documents of this

work and agree to execute the same accordingly.

C Any Excess in Tender Item/Extra Item if Needs to be Execute. Contractors has to carry out work on the instruction of Competant Authority on

Tender Submitted rate,No Excuse will be Accepted.Hence Contractor are Requested to quote the rate considering this condition.

D Contractor are requested to quote the Tender by considering that payment will be made after availibility of grant.Contractor has to start the work

immediately after issue of Work Order and as per instruction of Engineer-in-Charge irrespective of availibility of grant.

E "This estimate has been prepared on the new SOR wich is exclusive of GST hence GST additional will be paid to the agency as per existing

(Signature of the Contractor) Deputy Executive Engineer

Electrical R&B Sub Division

Executive Engineer

Electrical R&B Division

Note 1 Please strike out whichever is not applicable.

2 In the case of tendered amount being quoted incorrectly the quoted pered percentage Below/Above will be considered as final.