Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1₹1.6 LAccepted-AOC | ₹1.6 L | 1 | Accepted-AOC ACCEPTED L1 |
| 2 | 2₹1.6 L+₹2,842.61 (1.81%)Rejected-AOC | ₹1.6 L+₹2,842.61 (1.81%) | 2 | Rejected-AOC REJECTED |
| 3 | 3₹1.6 L+₹3,632.23 (2.32%)Rejected-AOC | ₹1.6 L+₹3,632.23 (2.32%) | 3 | Rejected-AOC REJECTED |
Tender Value
₹1.6 L
EMD Value
₹3,158
Closing Date
27 Jul 2026, 2:00 pmClosed
Assistant Engineer PWD, Slg Contn Sub Divn-II
Near 2nd Mahananda Bridge, Airview more, Siliguri
Renovation of Coding Room at the ground floor of Regional Quality Control Laboratory / Food and Supplies Department, Siliguri, under North Bengal Construction Division
2026_WBPWD_5016755_2
WB/PWD/AE/SCSD-II/02/2026-27
Open Tender
CIVIL WORKS
Percentage
SILIGURI
Please refer Tender documents.
4 documents required · 4 mandatory
₹3,158
17 Aug 2026
14 Jul 2026
29 Jul 2026
14 Jul 2026
27 Jul 2026
18 Jul 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1 | (A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : On timber or plastered surface : With super gloss (hi-gloss) - Two coats (with any shade except white) | - | Sqm | 81 | - |
| 2 | Supplying solid flush type doors of commercial quality, the timber frame consisting of top and bottom rails and side styles of well seasoned timber 65mm wide each and the entire frame fitted with 37.5mm wide battens places both ways in order to make the door of solid core and internal lipping with Garjan or similar wood veneers using phenol formaldehyde as glue etc. complete, including fitting, fixing shutters in position but excluding the cost of hinges and other fittings in ground floor. 35 mm thick shutters (single leaf) | - | Sqm | 2,659 | - |
| 3 | Wood work in door and window frame fitted and fixed in position complete including a protective coat of painting at the contact surface of the frame exluding cost of concrete, Iron Butt Hinges and M.S clamps. (The quantum should be correted upto three decimals). 1st class Best Indian teak. Sal : Siliguri. | - | Sqm | 81,936 | - |
| 4 | (B) Painting with superior quality aluminium paint of approved make and brand including smoothening surface by sand papering etc. on steel
surface : | - | Sqm | 38 | - |
| 5 | Applying Acrylic Emulsion Paint of approved make and brand on walls and ceiling including sand papering in intermediate coats including putty (to be done under specific instruction of Superintending Engineer) : (Two coats) Standard Quality | 1 | Sqm | 62 | ₹61.94 |
| 6 | Applying Interior grade Acrylic Primer of approved quality and brand on plastered or cencrete surface old or new surface to receive Distemper/ Acrylic emulsion paint including scraping and preparing the surface throughly, complete as per manufacturer's specification and as per direction of the EIC. (In Ground Floor) One Coat Water based interior grade Acrylic Primer | 1 | Per Sqm | 3,080 | ₹3,076.92 |
| 7 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (6mm nominal size) excluding shuttering and reinforcement,if any, in gound floor as per relevant IS codes. | - | Cum | 5,026.78 | - |
| 8 | Supplying bubble free float glass of approved make and brand conforming to IS: 2835-1987. 8mm thick clear glass. | - | Sqm | 848 | - |
| 9 | Supplying, fitting and fixing boiling water proof ply conforming to IS: 710-1977 bonded with phenol formaldehyde synthetic resin conforming to IS: 848-1974 of approved make and brand fitted and fixed as per design as per approval and direction of Engineer-in-Charge. [excluding the cost of supporting frame work and teak wood batten/Lipping]
In Ground Floor 9mm | 1 | Sqm | 1,290 | ₹1,288.71 |
| 10 | Grinding to marble / mosaic floor including remaining stone if necessary, after cutting with manual labour / machine, where necessary | - | Sqm | 20 | - |
stage.html
html • 0.05 MB
tech_bid_open.pdf
tech_eval.pdf
fin_bid_open.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
aoc.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.82 MB
BOQ_5086488.xls
BOQ • 0.29 MB
2911.pdf
Other Document • 0.50 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .