8780 SPECIAL REPAIRS TO CAMOUFLAGE PAINTING OF CERTAIN BUILDINGS IN TECHNICAL AREA AND PROVISION OF PREFAB SHELTER FOR MANNING AND HOUSING EQUIPMENT OF CUAS AT AF STATION, BAREILLY

Amount

M&L for complete removal of existing treatment by scrapping with mechanical wall sander (having mechanical vacuum mechanism) having RPM not less than 1500, sanding pad of 80 Grit having dia of 7"/9" to make the surface free from dust, loose paint etc. by skilled labour complete all as directed.

M&L for applying a priming coat of exterior primer over new or untreated plastered surfaces with fully automatic airless spray machine with a flow speed of min 1 ltr per minute having a pressure of 3300 PSI, and finally applying two coats of weather proof exterior emulsion paint of five different shades in camouflage pattern (Specific pattern as directed by Engineer-in-Charge) by allowing 6-8 hrs to dry the surface for painting of subsequent coats complete all as specified and directed.

M&L for preparation of old painted wood and wood based surfaces of any description not other wise described over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth at a height up to 12m from ground level and applying one coat of synthetic enamel paint complete all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description, n. exc 10cm width or girth when unconnected with other painting or when painted in a different tint at a height up to 12m from ground level and applying one coat of synthetic enamel paint all as specified and as directed.

M&L for preparation of old painted steel and iron surfaces of any description not other wise described over 10cm width or girth at a height up to 10m from ground level and applying one coat of synthetic enamel paint of olive green colour as base coat and making camouflage pattern (Pattern as approved by the GE) by applying two more coats of different coloured patches in different shapes as directed complete all as specified and as directed

All as per Item No. 6 herein before but work at a height exc. 10m but n.exc. 20m from ground level complete all as specified and as directed.

Hacking out old broken glass (any thickness, size, quality or description) from wooden/ steel/ aluminium frames glazed with putty or fixed with beads

S&F 5.5mm thick toughened glass fixed with rubber beading, glazing screws etc. as required complete all as specified and directed

Taking down cement plaster on brick work or stone walls, etc. including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement at heights up to 12m, complete all as specified and as directed.

M&L for rendering 15mm thick in CM (1:4) on concrete/ brick masonry surfaces of chajjas/ fins/ parapets etc at a height up to 12mtr from ground level, finished even and smooth without using extra cement complete including necessary scaffolding all as specified and as directed.

Demolition of cement concrete (un reinforced) of any description and in any position not otherwise specifically provided for all as specified and as directed.

M&L for plain cement concrete 1:1½:3, type A1 (Using 20mm graded stone aggregate) as in coping, leveling course etc including necessary form work as required complete all as specified and as directed.

M&L for provision of prefabricated shelter of size 10'x8'x8' fabricated with PUF wall panel made of composite PUF CFC free PU foam of 50mm thick sandwich between PPGI sheets, 40±2 kg/m³ density; PUF insulated roof panel with 23+30mm thick PUF sandwich panel of 40±2 kg/m³ density with top covered with trapezoidal profile pre-coated GI sheet, bottom covered with micro ribbing pre-coated GI sheet; including one door of size 900x2100mm, one window of size 970x1660mm complete all as specified and as directed. Note: All civil works like foundation/ plinth, steps, flooring etc are not included in the scope of this item.

Surface excavation n.exc. 30cm deep and averaging 15cm deep and getting out in soft/ loose soil all as specified.

Excavating manually in trenches n. exc. 1.5m wide and n. exc. 1.5m in depth for foundation etc. or for shafts, wells, cesspits, manholes, pier holes etc. n. exc. 10sq.m. on plan and n. exc. 1.5m in depth and getting out in soft/ loose soil.

M&L for plain cement concrete 1:4:8 type D2 (using 40mm graded stone aggregate) as in foundations, filling and mass concrete, sub base for flooring etc. all as specified and as directed.

M&L for Reinforced cement concrete 1:1½:3 type A1 (using 20mm graded stone aggregate) as in in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete all as specified.

Use and removal of steel formwork to sides of concrete foundations, footings, bases of columns, raft and raft beams, sides and soffits (if any) of foundation and plinth beams; and similar work; vertical or to batter for rough finished surface of concrete all as specified

M&L for hardcore with broken stone or boulders of gauge n. exc. 63mm, deposited, spread and leveled in layers n. exc. 15cm thick, watered and rammed to a true surface.

M&L for 75mm thick cement concrete type C2, 1:3:6 (using 40mm graded stone aggregate) in plinth protection, laid in bay n.exc. 3.00 sq.m each, finished even and smooth without using extra cement with and including all necessary form work to divide the area in panels, finishing exposed edges fair or rounding or chamfering where directed and providing 6mm wide joints throughout the thickness of plinth protection duly filled with mastic filling (one part of hot bitumen 85/25 and three parts of fine sand by weight) complete all as specified and directed.

M&L for PCC 100mm thick type C2 (1:3:6) using 40mm graded aggregate as in hard standing/ flooring complete finishing even and smooth without using extra cement all as specified.

M&L for rendering 15mm thick in CM (1:6) on concrete/ brick masonry surfaces, finished even and smooth without using extra cement complete all as specified and as directed.

M&L for preparation of new plastered surfaces of walls & applying two coats of cement based paint all as specified and as directed.

S&F high strength deformed TMT steel bars 10mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F high strength deformed TMT steel bars 6 to 8mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

S&F high strength deformed TMT steel bars 5mm to 10mm dia as in stirrups, spacers and binders, cut to length, bent to shape required, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9mm dia all as specified and as directed.

Returning, filling in including spreading leveling watering and well ramming in layers not exc. 25cm in any type of soil.

Removing excavated materials to a distance not exc. 50m and depositing where directed at a level n.exc 1.50m above the starting point.

Spreading and leveling of soil in layers n. exc. 25cm thick, well ramming including watering as required complete all as specified.

M&L for brick work with fly ash bricks straight or curved on plan exc. 6m mean radius using old size bricks built in cement mortar (1:6) all as specified.

M&L for non skid coloured ceramic joint free tiles 7 to 8mm thick (square/ rectangular) area of each tile exc. 0.11sq.m but n.exc. 0.18sq.m, in floors etc., set and jointed in neat cement slurry and pointed in coloured cement to match laid over and including 15mm thick screed bed in CM (1:6) complete all as specified.

M&L for Point wiring complete as specified with 1100 volt grade 1.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) drawn through and including rigid non-metallic PVC conduit of suitable size not less than 20mm dia, with all fittings, concealed in wall/ roof / floor including pressed steel concealed terminal boxes of required size with top cover of 3 mm thick of plastic laminated sheet of required colour suitable for housing switches/ sockets/ regulators etc. duly earthed with same cable as for wiring above but green in colour as continuous earthing wire complete all as specified for one light/ fan/ bell point controlled by one switch 6 Amps 1 way. [Note:- M&L for cutting chases for concealed conduit wiring on any surfaces and making good disturbed surfaces to match with the existing surfaces in cement mortar 1:3 and finishing with existing finishes shall be deemed to be included in the quoted rate.]

All as per Item No. 34 herein before but for one 3 pin 6 Amp socket out let point on independent board.

All as per Item No. 34 herein before but for one 3 pin 6 Amp socket out let point on same board with other switches.

All as per item No. 34 herein before but point wiring with 1100 volt grade 2.5sq.mm. (nominal area) single core PVC insulated unsheathed cable with multi-stranded copper conductor of FR-LSH grade (IS:694) duly earthed with same cable as for wiring above but green in colour as continuous earthing wire suitable for one 3 pin 16 Amps socket out let on independent board.

S&F wall/ surface mounted type LED light fitting 1 X 20 watt (4' long) with extruded aluminum batten with multiple lumen packages complete with all accessories internally pre-wired and including making electric connection with flexible three core 1.50 sq.mm size stranded copper conductor cable from light fitting to ceiling rose complete all as specified and directed. [Cat. Part No. BN021C LED22S PSU CW GR (SmartBright) of make: Philips or Cat No. LUMILINEPLUSPROBS20WLED840 SPCSSIND of make: Havells/ Cat No. CCS-100-20-65-HL2-DP-NWH of make: CG/ Cat No. LL20-221-XXX-65NE3 of make: Wipro]

S&F sheet steel powder coated distribution board SPN 4 ways, 240 volts, with 200 Amps rated bus bar, neutral link, earth bar, IP 43 protection and double door, IK-09 with metal door suitable for mounting MCBs all as specified and as directed.

S&F MCB SPN, 240 volts, 40 to 63 Amps, C curve 10 KA all as specified and as directed.

S&F MCB SP, 6 to 32 Amps, 230 V, C curve, 10 KA all as specified and as directed.

Supply, lay, connect, test and commissioning of LT XLPE insulated, screened, PVC bedded, galvanized steel strip or wire armoured electric power cables (heavy duty) with aluminium conductor 1100 volts grade of size 2 Core 10 Sq.mm complete all as specified and directed.

Supply and spread river sand as in cushioning for UG cable all as specified in clause 19.75 of SSR Part I. [Note: Punned down thickness shall be considered for payment]

M&L for well burnt Sub class 'B', modular bricks laid dry, flat, over the cable abutting each other, complete all as specified and directed.

S&F switch piano, flush type SP, one way 5/6 Amps, 230V AC

S&F switch piano, flush type, SP, one way, 15/ 16 Amps, 250 V, ISI marked.

S&F socket outlet 6 Amp, 2 in 1, 5 pin, 230V AC

S&F socket outlet 6/16 Amp, 2 in 1, 6 pin, 230 V AC

S&F ceiling rose PVC/ Poly carbonate isolated body, three terminal complete all as specified.

M&L for Earthing complete with galvanized steel earth plate electrode 60cm x 60cm x 6mm thick, buried directly in ground (earth pit not less than 2.25m deep below ground level) with top edge of earth plate not less than 1.5m below normal ground level, connected to 4mm dia GI earth continuity wire by means of bolts, nuts, check nuts and washers of galvanized iron or steel and connected from earth plate electrode to main switch board/ earthing test point including watering arrangement with PCC 1:3:6 type C1 chamber, MS funnel, wire gauge, 50mm thick precast RCC cover in Type B1, including necessary excavation in any type of soil, returning, filling in, removal of surplus soil to a distance n.exc 50m, charcoal and salt complete all as shown in electrical plate No. 3 of Schedule Part-I 2009 and connected to earthing test point all as specified or indicated and testing on completion.

MESSERS KHARAK SINGH BISHT

M M CONSTRUCTIONS

ZAIGHAM ENTERPRISES

Jain construction co