Renovation of Cabin & toilet Block at Joint Executive Director Cabin GUVNL 1 st floor and Various Misc. Civil work

Name of work :-Renovation of Cabin & toilet Block at Joint Executive Director Cabin GUVNL 1 st floor and Various Misc. Civil work.

Description Qty UNIT Rate Amount

Demolition of Brick work and stone masonry including stacking of serviceable materilas and disposal of unserviceable materials

with all lead and lift.(ii) In Cement Mortar.

Demolition including stacking of serviceable materilas and disposal of unserviceable materials with all lead and lift. (i) R.C.C. work

Demolition of terrace including stacking of serviceable materilas floor tiles and disposal of unserviceable materials with all lead

and lift.(i) Brick tile covering.

Dismentling doors, windows, ventilators etc. (wood or steel) shutters including chowkhats architraves, holdfasts and other

attachment etc. complete and stacking them within all lead and lift.(i) Not exceeding 3 Sq.M. in area.

Dismantling santtary fittings like wash basin . W.C. pan Indian and European type, flushing tank etc. including stacking the

materials with all lead and lift.

Brick work using common burnt clay building bricks having crushing strength not less than 35kg./Sq.Cm. in foundation and

plinth in Cement Mortar 1:6 (1- Cement : 6 -fine sand) (A) Modular

Providing 15mm thick cement plaster in single coat on Rough (Similar)side of single or half brick walls for interior plastering upto

floor two level and finished even and smooth in (i) Cement mortar 1:3 (1-cement:3-sand)

Providing and Laying Glossy/matt Finished vitrified tiles of size 600 x 1200 mm fixing of new tiles on the existing Flooring / wall

tile of 8-10mm thick of approved make and colour having homogeneous materials in flooring / wall laid on Chemical base and &

8 fixing of new tiles on the existing Flooring with necessary adhesives / chemicals. Shade as per approved by Higher authority of 15.00 SMT 1481

approved brands like JOHNSON / KAJARIA / NITTCO / AGL / SIMPOLO or its equivalent as directed by Architect/ Engineer in

Providing and Laying Glossy/mat Finished vitrified tiles of size 800 x 1600 mm fixing of new tiles on the existing

Flooring/Skirting and 10mm thick of approved make and colour having homogeniouse materials in flooring laid on Chemical

9 base and & fixing of new tiles on the existing Flooring with necessary adhesives / chemicals. (For Third floor) Shade as per 3.00 SMT 1713.00

approved by Higher authority of approved brands like Somani ,Asian(Bonzer), Sun Heart,Marbito as directed by Architect/

Engineer in charge.(Basic rate of The Tiles:110/SQFT and Measurement Should be Consider L X B)

Providing and fixing Suspended Gypsum panels from Gyptech or equivalent of size 595 mm x 595 mm At required height and

elevation in line, level, curvatures, shape, design, pattern and as per the specifications of suppliers including providing and fixing

heavy duty GI PVC coated frame work inclusive of suspenders etc. For fixing of ceilling board as per the manufacturer's detailed

specifications, instructions and directions. The rate includes the cost of providing, preparing and fixing False Beams of Ceilling

10 Boards of required size and at the required intervals including making necessary cut outs and openings of required shape, size 40.00 SMT 1575.00

and dimensions in the false ceilling and It's frame work for Electrical Fittings and A.C. Diffusers if required including.Providing all

the required tools, tackels, labours, scaffolding, staging and all the required materials complete job. as reqd. As directed by the

Engineer Incharge.inclusive of all material and labour and with transportation.

Providing and laying gang saw cut 18mm thick, mirror polished pre molded and pre polished machine cut granite stone of

required size and shape of approved shade, colour and texture in flooring, Door, window sill jambs, Table top and side

portion for washbasin and similar locations laid over 20mm thick cement mortar / fixing the same in wall including fixing

the same in wall / fixing on wall with base of araldite or its equivalent bonding agent and grooving from base and fixing with

suitable fixture including grouting the joints with matching pigment, epoxy touch ups etc complete as per direction of Engineer in

Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even

shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth.

Interior paint for wal l& Ceiling :Providing & laying of three coats with Royale luxury Emulsion paint (soft heen,withtefl on

paint)of Asian Paint or equivalent approved brand in shades and colour as directed on wall surfaces to give an even shade incl.

scaffolding to at any height with all labour and material afterthoroughly brushing the surface & making free from mortar droping

13 sand other foreign matter including surface preparation etc.complete. Including cost of all type of tools, tackles,all 60.00 SMT 310

labour,materials, transportation, cleaning, at all floor,all level,all depth,all Height,all lead and lift,performance waranty certificate

etc.work complete as per the detailed drawing,approved sample, specifications and instruction of Architect/EIC. Sample mock

shall be approved from Architect/EIC.

Providing and fixing wash down water closet (European type, W.C. Pan) with integral P or S trap including jointing the trap with

14 soil pipe in Cement Mortar 1:1 (1-Cement : 1-fine sand), Flush tank, Health faucat, two way bib tap, Seal and cover etc. 1.00 No 21174.58

Complete as Directed EIC (A) vitreous China Pattern :(i) in white colour

Providing and fixing washbasin with single hole for pillar tap including C.P. brass waste, M.I. Fisher, Angle cock 15 mm heavy

duty with cap, connection pipe (Make of JAQUAR ALD-803AB 450mm Long Braided Hose with M10X1 Nipple, 15mm Nut, O-Ring

15 & Rubber) with C.I. or M.S. brackets painted white including sutting holes and making good the same but including fittings.(A) 1.00 No 11147.1

Vitreous China:(ii) FLS-WHT-5601 Counter Top Basin,

Size: 565 x 415 x 190mm

Providing and Fixing 6mm thick mirror of superior quality glass including Itching and fixing with SS Studs. Etc. complete as

directed by EIC.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

17 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and 10.00 RMT 168.67

floor etc. complete.[A] 15 mm.

Providing and fixing concealed center point to wall ceiling & floor CPVC (SDR 13.5) PIPE having National Sanitation Foundation

18 (NSF) seal for potable water of following dia. nominal bore tube fittings and clamps including making good the wall, ceiling and 10.00 RMT 206.73

floor etc. complete. [B] 20 mm.

Providing, Supplying and Fixing of 35mm (Total) Thick Flush Door Shutter with 1mm Thick Green make Laminates on

Both Side of Shutter. Making / Construction of Flush Door is with Pine or southern Yellow Pine Filler and with Lock rail

on Center. Flush Door Provide with Teak wood beading patti (35mm X 12mm) on Peripheries of Flush Door with Door

Frame of Non Teak Solid Wood of size 75mm x 60mm with Chemically Treated and Seasoned Including Paint

Matching with Laminates. Frame & Flush door shutter having 5 year warranty against attack of biological agent like

termite, borers, decay, fungi and harmful insects also warranty against seasoning related issues like crack, bending,

twisting, warping. Laminates on shutter shall be press by cold press method. Shutter shall be brought to site in

packed PVC bags & pvc coating shall be removed on completion of work in such a way that shutter & Frame is free

from nail mark & any damages etc. Rates are also Inclusive of all Labors & Proviging 15cm. Long 6 No of Hold Fast

(25mm X 5mm) & 3 No of 6 Inch S.S. but Hinges, 100mm x 75 mm x 3mm thick, required Screw & Nails per Frame

and Fixing following S.S. Fixtures And Fastening. (1) Aldrops 1 No, 250mm x 16mm & Tadi 1 No, (2) Door Stopper

No, 100mm Long, (3) Double Leg Heavy Push Door Stopper 1 No & (4) Handle 2 No, 150mm Long X 10mm thick (5)

Shutter size: 1.2 M X 2.1 M. Door are Fixing as per Details Drawing & Instruction of Engineer in charge. All Materials

Used Shall be as Per approved Material Make List. The Required Frame is to be Obtained from Vanil Udhyog Maked

and fixing PVCshall

Nahni trap ISfor smaller

14735 size)- 75 mm diameter with jali of the following nominal diameter of self

cleansing design with C.I scread down or hinged grating including the cost of cutting and making good the walls.

21 Providing and fixing L&K make Conceal stop cock including two nos of brass MFT as directed by EIC. 1.00 No 1500

22 Providing & Fixing Towel Ring Square model No. Jaquar AKP 35721P as directed by EIC. 1.00 No. 1985.00

Providing & fixing Hydraulic door closer Godrej make including removing old damaged one with all necessary tools, tackles

and labours as directed by EIC.

(i) Providing and fixing glazed louvered glass windows and ventilators with teak wood frame 10cm. x 7cm. size including 3 coats

of oil painting to wood work etc.complete.

Providing and fixing roller blinds of Vista/Eco or equivalent make includiing all necessary accessories incl/ all materials, tools,

25 tackels, etc. as approved and directed by EIC. Samples should be approved by the Engineer In charge. ( Reduced rate of Rs. 15.00 Sqm 1300.00

1100/Sqmt will be provided for Vertical Blinds)

26 Job work for cleaning and removing unwanted material at out side campus 1.00 No. 5000.00

Carring out plinth treatment to post construction / existing structure by spraying chemical solution for termite control treatment

including labour and material consistment with I.S.I specification. Using Chlordene and Chiorpurfiles 20 EC. As Per 6131_paret-II

Consentration Weight one percent is recommended i.e one litre 20 EC chemical emulsion with 19 liter give 1 % concrentration

inclusive of one litre chemical emulsion appication at the rate of 5 Litre chemical / Sqm of surface is recommended as per I.S

Dismantling aluminium/ Gypsum partitions, ACP clading, doors, windows, fixed glazing and false ceiling including disposal of

28 unserviceable material and stacking of serviceable material with in 50 meters lead as directed by Engineer-in-charge. Work 10.00 SMT 40.77

complete including all type of tools, tackles, scaffolding etc complete as per instruction of Architect/EIC.

Providing and fixing aluminum compose panel SUN BOND / ALEX OR equivalent for Exterior Facade such as walls and ceiling

and projection by providing Aluminum hollow section of approved quality and make having section size 38mm x 25mm x 1.2mm

thick at maximum spacing of 600mm both direction with necessary fittings same in line and level and fixing the frame work with

29 anchor fasteners. The aluminum composite panel 4.00 mm thick be fixed on the frame work having thickness of 1.5mm as per 10 SMT 2050

details provided in drawing or as directed by EIC. The in between Grooves between Two panels shall be filled with colour Epoxy

as directed by EIC. Necessary cutout for electrical switch board etc., may be made as per instruction without any extra cost.

Providing & Fixing of STL45 ie.Single glazed modular system consist of Aluminium section of 25 x 45 x 2.5 mm thick. All sections

duly Powder coated/anodised with 6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section &

degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and

45 mm wide with 12 mm toughen glass as per approved make & insertion of Thermoplastic gasket to adhere the glass firm &

airtight.The sound reduction Value is from 32 to 35 Db.With 6 mm Groove inbuilt in system to accomodate the carpet & the

uneven surfaces.Work including horizontal thin profile member at lintel lvl. as per drawing. Accessories/Hardware: neutral cure

glazed & metal silicon sealant of approved make on the periphery of the glass & wood etc. Work complete including all type of

material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, safety measures, sample mockup, all

floor, all levels, all heights etc complete as per detailed drawings, specifications or as per instruction of EIC.

Providing and fixing 12 mm thk. Toughened clear glass door with pre-fitted necessary hardwares of Enox / Ozone / Godrej or

equivalent make for smooth swinging action includeing top and bottom patch pivot as per drawing or as directed by EIC . Rate

31 shall include necessary approved locking systems, S.S. brush finish (Heavy duty or equivalent), gaskets, Door handel, Floor 3.00 SMT 6210.00

Spring, Door Closer & miscellaneous hardware items as approved by EIC. Including all materials and labour etc. complete as per

detail drawing or as per instruction of EIC.

Shifting of existing furiniture and other materials at any location within Head Office Complex as directed by EIC.

Supply, installation, testing and commissioning of UL listed and FM approved addressable type isolator modules for isolating

33 shorted, dewired and loose circuits between two successive fault isolators with automatic resetting arrangement. 5.00 No 7000

"The device shall be compatible with existing Fire Alram Panel i..e. TATA Honeywell Morley IAS, ZX5Se"

Providing & Fixing of fire extinguishers with necessary accessories, stand, trolley, etc., ISI Marked portable fire extinguisher, 6 kg

34 Clean Agent type fire extinguishers (HFC236FA) complete in all respect including initial fill and wall suspension brackets & shall 3.00 Each 36410

Supplying of High Back Revolving Chair of HOF Brand (Model Zoro-H (E) EXECUTIVE REVOLVING CHAIR Seat & Back Cushioned

on 12 mm. Hot pressed ply, Crome Base, Synchro tilt Mechanism with multy Position back Lock, Seat & Back - Made from High

35 Density U - FOAM, Alluminium n ms PC armrest with cushion pad or equivalent or as selected by EIC. The rate shall include all 1.00 Each 26780

materials, hardware and labour etc. complete or as per instruction of EIC.

Supplying of High Back Revolving Chair of HOF Brand (Model Zoro-M € EXECUTIVE REVOLVING CHAIR (Med Back) Seat & Back

Cushioned on 12 mm. Hot pressed ply, Crome Base, Synchro tilt Mechanism with single Position back Lock, Seat & Back - Made

from High Density U - FOAM, Alluminium n ms PC armrest with cushion pad or equivalent or as selected by EIC. The rate shall

include all materials, hardware and labour etc. complete or as per instruction of EIC.

Providing and Fixing new L shaped Corner sofa with necessary teak wood support structure, 19 mm plywood with 4" teak wood

or stainless steel legs. The seating shall be made of 4" thick foam of 40 density HR (High Resilance) foam and 2" thick foam of

32 density HR (High Resilance) foam for back, 1.5" soft foam for seating and back, recorn polyster synthetic sheet of 1" thick

and it shall be finished with fabric upholstery including finishing of exposed surfaces with semi gloss PU polish as approved and

directed by EIC. All material shall be approved by EIC. The rate shall be for complete item inclusive of all material, labour,

wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Rate shall

inclusive of providing mockup sample for approval of EIC. Measurment shall be taken out to out including handels (maximum

possible linear measurment in L shape)

Medium Height Storage Providing and fixing of low storage unit of 1200 mm depth, as per Specifications, design and drawings,

including of all the taxes, GST as per the prevalent rules, materials, transportation, erection of complete item as directed by

EIC/Architect.Rate Shall be including The basic structure of the drawer unit, shall be made out of 18 mm ply. The sides and

38 fascia shall be finished in all side Laminate and the drawers shall be running on sliding on channels. Top portaion shall be 3.00 SMT 21930.52

finished in selected vineer of approved quality with malamine polish on top side. A wooden member of size: 2 ½” x ¾” shall be

fixed between each drawers complete as per shown in detailed drawing and instructions of Arch & MGVCL eng-in-

Providing & fixing of center table as per approved make and shade by EIC. Table Top: comprising from ply with veneer with

polish Vertical support from teakwood/Metal with powder coating. Work complete including all necessary hardware and fittings

mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories. Work complete as per

the instruction of EIC. Basic rate of veneer is 120/ Sq.ft

Providing and fixing Floor Spring 120 kg Load Adjustable,Maximum Door Width 1000 mm,Maximum Opening angle 130 Degree,

90 Degree Hold open in Both Direction as directed by EIC.

Providing and fixing decorative Frosted glass film with pattern as per design, Translucent, cast PVC, self-adhesive vinyl as per

sample selected with warranty of 3 Years must be provided by contractor. work complete including all type of tools, tackles,

41 scaffolding etc complete as per suggestion of EIC. If the work will not be completed with satisfaction of EIC, the contractor shall 20.00 SMT 862.5

remove all film without any extracost.Including surface preparation etc.complete.Including cost of all type of tools, tackles, all

labour, scaffolding etc. 20% of cost of item executed will be kept with company during warranty period.

Supplying, fitting On Flooring With Chemical and fixing 8 mm thick Laminated wooden Flooring Work conforming to

EN13329:2006 with plank size not Iess than 1200mmX 190 mm (with unlink/tongue-groove locking arrangement) having 0.2mm

thk top abrasive layer over a decorative layer followed by a High-density fibreboard (HDF) having density > 940 kg/m3 substrate

core over a resin saturated backing layer and installing through unlink or tongue- groove system (having locking strength not less

than 1000 kg/m) over a 2 mm thk under layer polyurethane foam on polythene sheet 250 micron, over a smooth, flat, hard

42 subfloor free from moisture (< 8%), grease etc. complete in all respect with requisite accessories like end profile, transition 35.00 SMT 2099.9

profile, reducer 'T' profile etc. wherever required and preparation of base including all other incidental works as per direction &

satisfaction of Engineer in charge. Cost of Laminate Floor with Accessories (Skirting, End edge, Tmoulding,Reducer )shall be

added as and when require.ln Ground FIoor: Category: High Footfall ; Class 23;Abrasion resistance:-AC4 Thk on Swelling:- <

15% ;Impact resistance:- IC 2 Shade and texture shall be as approved by MGVCL in charge/ Architect (Basic rate of the Wooden

Flooring:150/ SQFT and Measurement Should be Consider L X B )

Sliding window : Domal section : 27x65 mm series Supply & Fixing of Walnut anodized Aluminium sliding window with powder

coated as per by approved make & sample by architect/EIC. Frame section: 40 x 89 x 1.5 mm ,Shutter section : 27x 65 x

mm ,Mosquito shutter : 27 x 65 x1.5mm Glass : 5 mm thick clear reflective toughened glass of saint gobain or approved make

43 list including EPDM Gasket, Woolen In Shutter, Multiple Lock, Anti Rattling Guide, Lock Guide, handle Antilifting, Shutter 10.00 Smt 7370

Corner Clit, Shutter wing Connecter, Interlock EPDM Gasket, Interlock Guide, Anti Capillary Pad, Bush Bottom silicon all side &

All Necessary Hardware etc. complete as per detailed drawings, mock sample and specifications.as per details etc complete for

Art work : Art work : Providing and fixing in position commissioned art works inside the building on the wall or ceiling and

extension of the same till floor/ceiling. The composition of the commissioned art work shall be from any type of wood, metal like

copper, brass, SS, MS, fabric, polycarbonate sheets, acrylics, rubber, plastic, tough boards, cementatious boards, fibers,

gypsum, POP etc. all. The form of material may also very based on material properties like sheets, wires, blocks, inclusion of

cutouts, bending of the materials, profile cutting an shaping of the materials, manufacturing at site as well as at site, covering

the prepared material by means of the bubble sheets, jute bags or in wooden packing materials. The commissioned art work

may require any shade, finish and texture of duco painting, specialty painting, PU painting, general painting to paintable

surfaces, galvanizing, powder coating, anodizing etc.. The base surface where the commissioned art work is to be installed

also needs some modification to enhance the effect of art works. The use of material like fiber glass wool/ boards, filler fabric,

mounting material may also essential based on the design of the art work by artist. The rate shall be inclusive of any type of

lighting features to be added into it includes LED lights, neon lights including its supporting and suitable wiring for the same

within the art works. Only one electrical control point connection will be given as close to art works. The rate shall be inclusive

of making necessary provisions

44 within the commissioned art works of fixing of the same. The provisions of the fixing of the art work may be in parts but it shall 5.00 Smt 14375

be inclusive of the all arrangements like LN key, studs, anchors, nuts and bolts etc. all.. The concept of the art work will be

generated by architect and interior designer and based on that offers from the artists to be invited for design and execution of

the artwork. The selection of the artist is to be done by architect and interior designer only. Main contractor is bind to follow the

methodology suggested by architect and interior designer to be followed for development of commissioned art work. The

overall outline area covered by art work is to be considered for the measurement instead of actual area of art work. Deductions

of the internal cutouts, spaces in between of the art work shall not be made. Since there is huge variance in types of the

commissioned art works, the same is to be completed in all respect inclusive of the materials and methodology is stated above

and may not be. For any additional materials, process, methodology no extra payments shall be made. The quotations of the

artist shall be got approved in advance including area of the proposed art works. Total payment of the artwork will be done as

per basic rate and difference between actual cost per sqm and basic rate per sqm will added or deducted without any

consideration of the, overhead and profit over the difference. It is the responsibility of the main contractor to provide scaffolding,

power, water, facilitating the areas required for developments and storage of the art work etc. The protection and cleaning of the

pre and post installation of the art work is the responsibility of the main contractor.

Logo Work : Providing and fixing Brass finish logo for satymev jayate for D.O.S. cabin. work complete as per architect

selection, letters as per detailed drawings and fixed with approved adhesive with necessary fittingsand as per detail drawing.

45 (logosizewill beaprox. Size- 2' )Workcomplete including all necessaryhardwareand fittings , mockupsample, loading, unloading, 1.00 No 52000

transportation,placing at all floors and for all leads,all accessories as described in item description.Work complete as per the

detailed drawing and instruction of Architect/Client.

46 Providing Service of Plumber/Carpenter for Plumbing Work or Carpentary Work if any directed by E.I.C. 20.00 No 600

47 Providing Helper For Plumber/Carpenter for Plumbing Work or Carpentary Work if any directed by E.I.C. 30.00 No 450

48 Any item of GoG SoR of prevailing year / Approved Rate Analysis/Approved P.O.,W.O. / C.O. Circular etc. For unforseen work. 1 Job 50000

Total Estimated Amount without GST in Rs.

Total Estimated Amount with 18% GST in Rs.

I/We am/are willing to carry above cited work at ___________% above/below/of the estimated amount. Accordingly, total amount of work comes to

I/We am/are willing to carry above cited work at ___________% above/below/of the estimated amount. Accordingly, total amount of work comes to

 GST at applicable rate will be reimbursed in actual to the contractor only after submission of sufficient proof of such payment made to the Govt. for claiming refund of GST,

 Labour welfare cess will be deducted from RA and final bill cess per latest prevailing law.

EE (O&M), MGVCL, D.O.

Sign & Seal of Contrctor Vidyutnagar Colony Vadodara