REPAIR TO ROOF, CEILING, PLINTH PROTECTION AND MISC WORKS AT 217 TRANSIT CAMP PALCHAN.

Amount

Dismantling wall and ceiling board,of any description complete all as specified and directed by Engr-in-Charge

M&L for 12 mm thick prelaminated particle board interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to frame work as in ceiling/Walls complete all as specified and directed by Engr-in-Charge.

Dismantling plain or corrugated steel sheeting , any gauge , thickness roof coverings complete all as specified and directed by Engr-in-Charge.

S&F 0.63 mm galvanised corrugated mild steel sheeting with two corrugation side lap fixed with coach screws and washers in roofs wall etc with grade of zinc coating 275 complete all as specified and directed by Engr-in-Charge

S&F coloured pre-painted galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick having tensile strength of 550 Mpa & Profiled with pitch distance 195-200 mm c/c and rib depth 28 to 32 mm fixed as in roof covering/cladding to wall by using self tapping screws including necessary washers etc all as per manufactures instruction, complete all as specified and as directed by Engr-in-Charge.

S&F coloured pre-painted galvalume aluminium zinc coating GI based plain steel sheet 0.50mm thick having tensile strength of 550 Mpa & Profiled with pitch distance 195-200 mm c/c and rib depth 28 to 32 mm fixed as in roof covering/cladding to wall by using self tapping screws including necessary washers etc all as per manufactures instruction, complete all as specified and as directed by Engr-in-Charge.

Dismentling timber in fillets,rails,posts,rafter ,purlin etc under 40 Sqcm in section complete all as specified and directed by Engr-in-Charge.

Dismantling Mild Steel work of any description not otherwise provided for complete all as specified and directed by Engr-in-Charge

S&F roof truss (framed) trussed, purlins, crane gantries, rails and fastenings and heavy brackets framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc. complete all as specified ta eg framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc. conforming to Fe-410, Gde E-250 Quality-A complete all as specified and directed by Engr-in-Charge.

M&L for preparation of new steel surfaces of any description over 10cm in width or girth not otherwise described and applying 2 coats of Synthetic enamel paint over a coat of red oxide primer, all as specified and directed by Engr-in-Charge.

M & L for Rendering 15 mm thick cement mortar (1:6) on fair faces of brick /stone masonary or concrete block wall surfaces, complete all as specified and directed.

M&L for two coats of cement base paint on walls of approved tint on newly plastered surfaces including preparation of surfaces by brooming or by steel wire brushing and complete all as specified and directed.

S&F in repair 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work as in wall paneling, all as specified and directed by Engineer-in-charge.

S&F in repair 12mm thick Veneered decorative plywood, grade 1 (with BWR resin) with decorative face veneers on one face; fixed with screws to timber frame work as in ceiling, all as specified and directed by Engineer-in-charge.

M&L Plain fillets,square,rectangular or triangular in section, clean sawn, secured with nails or brads of size n. exc 3sq cm of second class softwood as in lipping etc complete all as specified and directed.

M&L in repair for Second class softwood timber framed and fixed, Clean sawn in scantling, complete all as specified and directed.

M&L for Preparation of new wooden surfaces of any description over 10cm width or girth and applying two coats of synthetic enamel paint over and incl a coat of pink primer complete all as specified and as directed by Engr-in-charge

NATHU RAM AND SONS (BID ID -3179571)