Loading
Loading…
Loading…
Tender ID
| # | Company | Status |
|---|---|---|
| 1 | Accepted-Technical NOT AVAILABLE | NEW DELHI | DELHI | 110001 | Accepted-Technical Eligible |
| 2 | Accepted-Technical | Accepted-Technical Eligible |
| 3 | Not Admitted-Fee/PreQual/Technical | Not Admitted-Fee/PreQual/Technical Not Complied with technical specification |
Tender Value
₹61.3 L
EMD Value
₹1.2 L
Closing Date
4 Apr 2026, 5:00 pmClosed
Executive Engineer
Jal Shakti Division Kullu
SH Excavation, dismantling and re-aligning of GI pipe 80 mm dia 250 Rmt, 100 mm dia 500 Rmt near Upper Khalara, providing, laying, jointing and testing of GI pipe 80 mm dia 1150 Rmt near Balabehar, repair and replacement of motors including anc
2026_HPIPH_132518_1
14794-14844 Chamunda Nagar
Open Tender
Civil Works
Item Rate
60 days
Chamunda Nagar
Please refer Tender documents.
6 documents required · 6 mandatory
₹2,000
Executive Engineer
₹1.2 L
6 Apr 2026
25 Mar 2026
6 Apr 2026
25 Mar 2026
4 Apr 2026
25 Mar 2026
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Excavation in foundations, trenches etc.in all kind of soil in all leads and lifts such as pick work, jumper work in saturated/unsaturated soil including bailing out water, blasting work in hard/ soft rock or chiseling in hard/soft rock where blasting is prohibited in all lifts stacking the excavated earth not more than 3 mtrs clear from the edge of excavation and then returning the stacked soil in 15 cm layers when required into plinths sides of each deposited layer by ramming and watering and then disposing of all surplus excavated earth foundations etc., consolidating as directed within all leads and lifts and handing over the useable materials available from excavation to department free of cost as per direction of Engineer-in-charge with in all leads and lifts. | |||||
| 2Dismentaling of GMS Tube ( L) grade of following dia and stacking properly at site complete with in all leads and lifts as per the entire satisfaction of Engineer in charge. | |||||
| 2.01 | 80 mm dia | - | Rmt | - | - |
| 2.02 | 100 mm dia | - | Rmt | - | - |
| 3Relaying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. | |||||
| 3.01 | 80 mm dia | - | Rmt | - | - |
| 3.02 | 100 mm dia | - | Rmt | - | - |
| 4Providing laying, jointing (by way of circumferntial butt welding joints by electric arc welding ) and testing of Galvanised mild steel tubes ( GI pipe) of following diameter confirming to IS:1239-1990( latest with up to date ammendments) having minimum wall thickness as per IS code with bevelled/ plain ends in a random lengtth of 4 to 7 meters , including manufacturing reducers/ tapers, all short pices bends etc and class of pipes specified below, provided and jointe as per site requirement made from parent tubes. including lowering and laying in excavated trenches to ensure required level including flushing , cleaning and hydraulic testing complete in all respect to the satisfaction of engineer in charge . the fabricated bends shall have three or four cuts having its radius not less then five times the dia of pipe . the damaged portion of the pipes and specials made from the parant tube during welding or otherwise shall be provided anticorrosive treatment by applying two coats of anticorrosive bitumenous paint over a primming coat as per AWWA specifications C-203-1978. The welding electrodes shall be as per IS 814 of Advani Oerlikon/ L&T or ISI marked make. The rates also includes entire carriage of material, flushing, cleaning & hydraulic testing complete to the best satisfaction & directin of Engineer in charge with in all leads and lifts. | |||||
| 4.01 | 80 mm dia | - | Rmt | - | - |
| 5Providing, installationg, commissioning and testing of squirrel cage induction motor 3 phase KSB/Kirloskar/Crompton Greaves/ABB/ Mathar platt with gear box of required capacity with base plate and all other required accessories and cabling work with in all leads and lifts and to the entire satisfaction of Engineer in charge. | |||||
stage.html
html • 0.02 MB
tech_bid_open.pdf
tech_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.04 MB
Tendernotice_1.pdf
PDF • 0.38 MB
FORMSIX.pdf
Tender Documents • 0.37 MB
FORMEIGHT.pdf
Tender Documents • 1.42 MB
TERMANDCONDITION.pdf
Tender Documents • 0.35 MB
BOQ_195958.xls
BOQ • 0.29 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .