Mitigating of Landslide Flood Hazard for Kotla Town in Tehsil Jawali Distt Kangra HP Sub head construction of wire crates in various reaches Channelization of Nallah and Construction of RCC Duct 495 Rmt

Amount

Excavation in foundation and trenches etc. in earthwork lift upto 1.5 m, stacking the excavated soil not more than 3 m clear from the edge of the excavation and then returning the stacked soil in 15 cm layers when required into plinth sides of foundation Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge .

Excavation in earth work and disposal of all excavated earth upto all leads and lifts, disposed work earth to be levelled and neatly dressed in spade work Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge .

Wire crates made of GI wire filled with square cut faces against the wire in embankment sloping aprons(boulders filling to be measured and paid for separately) 15x15 cms mesh GI wire 5.00mm thick corresponding to (SWG-6) complete i/c carriage of materials within all leads & lifts as per direction and to the entire satisfaction of Engineer-in-charge .

Providing, laying stone filling in apron of gabian wall in wire crates made of G.I. wire filled with boulders with square cut faces against the wire (wire crates to be measured and paid for sepecately) including carriage of material Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing & laying cement concrete 1:4:8 (1 cement : 4 Sand :8 graded stone aggregate 40 mm nominal size ) and curing complete excluding cost of form work in foundation & plinth. Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge

Providing and laying cement concrete 1:2 :4 (1: cement :2 sand :4 graded stone aggregate of 20mm.nominal size) and curing complete excluding the cost of form work and reinforcement for reinforced concrete work :- in .

Foundations, footings bases of coloumns and the like mass concrete Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Vertical surface such as wall any thick (0.10 mtr. thickness) partition and the like including attached pillasters,buttreses,plinth and string courses etc. from top of foundation upto floor to level Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Suspended floors, roofs, landing and shelves and their support balconies,beams, girders, bressumers and cantilevers up to floor two level etc. complete in all respect with in all lead and lifts as per direction of Engineer-In-Charge

Providing form work with steel plates 3.15 mm thick welded with angle iron in frames 30 x30 x 5 mm so as to give a fair finish i/c centring,shuttering,strutting & propping etc. with wooden battens & ballies, height of propping & centring below supporting floor to ceiling not exceeding 4 mts. & removal of the same for in situ-reinforced concrete & plain concrete work in :-

Flat surfaces such as soffits of suspended floors, roofs landings and the like up to all thickness Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Vertical surface such as wall (any thickness) partitions and the like including attached pillasters,buttreses,plinth and string courses etc. Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

In sides and soffits of beams, haunching, centilivers, girders, bresumers and lintels etc. Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing mild steel /Tor steel reinforcement for RCC work including bending,binding and placing in position complete in upto flood to level in cement concrete work as per Complete in all respect with in all leads and lifts as per direction and to the entire satisfaction of Engineer-in-charge.

Providing and fixing CI man hole cover and frame confirming to IS12592 (part-1) 1998 with latest ammendment 560 mm dia. medium duty complete in all respect as per the direction of Engineer-in-Charge.

M/s Bhagwati Construction Co. (BID ID -491651)

gagan ohri (BID ID -491757)

RANBIR SINGH (BID ID -491826)