Reti Kankar 2025-26 Construction of Hall on Primary School at village Vyaval Ta. Nizar Dist.Tapi.

Name of Work:- . Reti Kankar 2025-26 Construction of Hall on Primary School at village Vyaval Ta. Nizar Dist.Tapi.

: : BILL OF QUANTITY.' : :

Percentage Rate Tender

It. Description of Item (with brief Specification and reference to Rate In

Quantity Unit Amount

No. book of specifications) Figures

1 Providing and laying controlled cement concrete M.200 and curing complete 5.42 Cum. 8864.77

the cost of formwork but excluding reinforcement for reinforced concrete work

in (D) Columns, Pillars posts and struts, upto floor two level. (more than

2 Providing and laying controlled cement concrete M.200 and curing complete 6.51 Cum. 6862.95

the cost of formwork but excluding reinforcement for reinforced concrete

work in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (more than 10 ton)

3 Providing laying controlled cement concrete M 200 R.C.C lintel including 0.47 Cum. 9510.72

finishing smooth with,curing etc. complete including the cost of formwork but

excluding the cost of reinforcement

4 Providing and laying controlled cement concrete M.200 and curing complete 11.74 Cum. 6865.98

the cost of formwork but excluding reinforcement for reinforced concrete work

in (C) Slabs, landing, shelves, Balconies, Lintels, Beams, Girders and

Cantilever upto floor two level. (more than 10 ton

5 Providng TMT bars renforcement of FE 500/500D for R.C.C. work including 4059.00 kg 77.29

bending binding and placing in position complete for all floor.

6 Brick work using hydraulically pressed common burnt clay building brick 22.83 Cum. 4444.59

having crushing strength not less than 35 kg/sq. cm. in super structure above

plinth level up to floor two level in cement mortar 1:6 ( 1 Cement: 6 fine sand)

(B) Convention for G.F

7 Providing and laying Machine cut, Free edges, Machine polished Granite 16.44 Sqmt 2506.92

stone slab 18 mm thick Single Piece For doors and Windows Cill and Jambs

Cladding as per design including Full moulded Round front edge and 1 cm

nosing and laid on 20 mm thick cement mortar 1:6 (1 cement : 6 coarse

sand) and jointed with gray cement slurry including rubbing and polishing etc.

8 Providing and fixing flush door both sides laminated andshutter fabricated 5.88 Sqmt 4501.57

from 35 mm thick solid core malemine faced three layered pre laminated flat

pressed wood based exterior grade bonded BWP/BWR synthetic resin having

stamped IS 12823 grade I type II including three coats of lacquer polishing

to exposed wooden surfaces and Stainless steel decorative type designs

fixtures / fastening 2Nos. Handles, 2Nos. Aldropes, towerbolt etc. as per

architectural detailed drawing and as directed by engineer in charge..

9 Providing and fixing window having extruded aluminum Colour anodized 16.74 Sqmt 1591.87

section frame main outer size 95mm x 24mm x 1.17mm @ wt.of 0.738 Kg/mt

, horizontal Three track member size 92mm x 31.75mm x 1.30mm,@ Wt.1.07

Kg/mt , vertical member of size 92mm x 31.75mm x 1.50mm @ Wt.

Kg/mt with sliding shutters of horizontal member size 40 mmx18mm x1.29mm

@ wt.of 0.456 Kg/mt, vertical member of size 40mm x 18mm x 1.29 mm @

wt.of 0.456Kg/mt/ with 5 mm thick transparent bronze colour tinted float glass

with powder coated aluminum fittings and fixtures and transparent silicon

sealant glass fixing to frame as per details etc

10 Providing & fixing M.S. grill / M.S. door of required pattern to wooden frames 452.70 kg 165.64

of windows/ brick masonry with necessary M.S. angle, M.S. pipe, M.S. flats

and other structural steel at required spacing and frame alround square or

round bars with round headed bolts and nuts or by screws (Plain Grills)

Including primer coat of approved quality and two coats of oil paintings etc.

complete as directed.

11 Providing 15mm thick cement plaster in Single coat on brick/conceret wall for 152.96 Sqmt 249.63

interior plastering finished even and smooth (ii) cement mortar 1:4 (1-cement :

4-sand) and mala provel finished etc. competle for (G.F.)

12 Providing 10mm thick cement plaster in single coat on brick/conceret wall for 112.84 Sqmt 194.20

interior plastering finished even and smooth (ii) cement mortar 1:3(1 cement:3

sand) and mala trovel finished etc. complete.GF

13 20 mm thick sand faced cement plaster with on wall upto all height above 143.08 Sqmt 337.52

ground level consisting 12 mm thick backing coat of c.m. 1:3 (1 cement :

sand ) and 8 mm thick finishing coat of cm 1:1 (1 cement : 1 sand) etc.

complete.all height etc. complete

14 P & L 24" x 24" vitrified 8 mm thick tile flooring over 20 mm (average) base of 103.70 Sqmt 1432.78

cement mortar 1:6 ( 1 cement: 6 coarse sand) on new surface or fixing on

existing flooring by adhesive material including dismentaling of existing

flooring and jointed with color cement slurry including finised with flush

pointing & cleaning the surface etc. complete for light shade (more than

15 Providing and laying broken chine mosaic flooring for terrace using 12 mm to 75.58 Sqmt 765.97

20 mm broken pieces of glazed tiles to be laid over cement mortar 1:3 to plain

or slope and to be tempered to bring mortar creme out upto surface using

white cement including rounding off junctions and extending them upto 15 cm

along the wall,clearing with water and oxalic acid etc. as directed.

16 (A) Providing and laying internal cement based water proofing treatment 75.58 Sqmt 898.50

including preparation of surface as required for tretment of roofs, balconies,

terrace,etc. consisting of following operations.

(a) Applying and grouting a slurry coat of neat cement using 2.75 kg/sqm of

cement admixed with proprietary water proofing compound conforming to IS :

3645 over the R.C.C. slab including cleaning the surface before tretment.

(b) Laying cement concrete using brocken bricks/brickbats 25 mm to 100 mm

size with 50% of cement mortar 1:5 admixed with proper water proofing

compound confirming to IS : 2645 over 20 mm thick layer of cement mortar of

mix 1:5 admixed with proprietary water proofing compound confirming to IS :

2645 to required slope and treting simillary the adjoining walls up to 300 mm

height including of junction of walls and slabs.

(c) After two days of proper curing applying a second coat of cement slurry

admixed with proprietary water proofing compound confirming to IS :

(d) Finishing the surface with 20 mm thick joinless cement mortar of mix 1:4

admixed with proprietary water proofing compound confirming to IS :

and finally finishing the surface with neat cement slurry and making of 300 x

(e) The whole terrace so finished shall be flooded with water for a minimum

period of two weeks for curring and for final test. all above operations to be

done in order and as directed and specified by the Eng-in-charge.

17 Finishing wall with water proofing cement paint of on wall surface ( Two 143.08 Sqmt 117.40

coats) to give an approved brand manufacture and of requred shape even

shade after throughtly brushing of loose powered materials.

18 Wall painting (two coats) with plastic emulsion paint of approved brand and 265.80 Sqmt 127.51

manufacture with on undecorated wall surface to give an even shade

including throughly brushing the surface free from mortar droppings and other

foreign matter and sand papered smooth along ceilings and sloping roofs.

19 Providing and Laying Rebar Joining Existing RCC Work, Dimelting Existing 1.00 Job 35350.00

Perapet Work ( RCC and Bricks Work), Extra Repairing Work Existing

Building demage During New Construction like Plaster, Colour, Bricks work

Etc. as directed by Engineer in charge with all necessary tools & plants etc.

20 Providing and fixing eco-friendly light weight calcium silicate false ceiling tiles 75.58 Sqmt 1674.15

having Tegular edge & 15 mm Thick Densified edges on the Tile Periphery for

Extra Strength The Light weight calcium silicate ceiling tiles shall have, light

reflection 85% non-combustible as per B.S. 476 part IV, 100% humidity

resistance and also having thermal conductivity0.043° w/m KC.for the best

thermal Insulation. The Light weight calcium Silicate tile shall be of approved

texture Fine fissured/ Spintone/ Cosmos having NRC value of 0.5 & Globe

having NRC value of 0.75 NRC or equivalent of size 595 X 595 mm to be laid

on true horizontal level suspended inter locking metal grid of hot dipped

galvanized steel sections (galvanizing @120 grams per sqm including both

side) consisting of main ‘T’ runner suitably spaced at joints to get required

length and size of 24 X 38mm made from 0.30 mm thick (minimum) sheet,

1200mm centre to centre, and cross ‘T’ of size 24 X 28mm made out of

0.33mm (Minimum) sheet spaced 1200mm along spaced between main 'T' at

600mm centre to centre to form agrid of 1200x600mm and size 24x48mm

made of 0.30mm thick (Minimum) sheet to be interlocked at middle of the

1200x600mm panel to form grid of size 600x600mm resting on periphery

walls/partitions on a perimeter wall angle pre-coated steel of size

(24x24x3000mm made of 0.40mm thick (minimum) sheet with the help of rawl

plugs at 450mm centre to centre with 25mm long dry wall screws @ 230mm

interval and laying 15mm thick densified edges light weight calcium silicate

ceiling tiles of approved texture (Fine fissured/Cosmos/Spintone) in the grid

including cutting/making opening for services like diffusers, grills, light fittings,

fixtures, smoke dtectors etc., wheneveer required, Main 'T' runners to be

suspended from ceiling using G.I. slotted cleats of size 25x35x1.6mm fixed to

ceiling with 12.5mm dia and 50mm long dash fasterners, 4mm G.I. adjustable

rods with galvanized steel evel clips of size 85x30x0.8mm, spaced at

1200mm center to centre long main 'T' bottom exposed with 24mm of all T-

sections and also provide additional frame work and suspended G.I. support

as required height shall be pre-painted with polyester baked paint, for all

heights, as per specifications, drawings and as directed by engineer-in-

charge. Note:- Only calcium silicate false ceiling area will be measured from

wall to wall. No deducation shall be made for exposed frames/opening (cut

outs) having area less than 0.30sqm. The calcium silicate ceiling tiles shall

fissured/Spintone/Cosmos and 0.75 NRC for Globe, light reflection 85% non-

21 Providing and fixing in position 300 mm high, 150 mm wide English/Gujarati 30.00 Nos 757.50

letters made from 1.0 mm thick stainless steel sheet as directed by Engineer

in charge with all necessary tools & plants etc. complete.

22 Design, supply & installation of Name/Number Plate including lettering made 0.90 Sqmt 1444.30

of polyvinayl of approved color on 1 mm thick stainless steel (SS 304) sheet

as approved by Architect or Engineer-in-charge. For all floor

23 Providing and fixing marble slab including engraving and painting complete. 1.00 Nos 1012.65

(i) Size 75cm x 60cm x 4cm.

24 Energy-efficient split air conditioner suitable for residential or office use. 4.00 Nos 36360.00

Features fast cooling, inverter technology, and eco-friendly refrigerant

(R32/R410A). Equipped with remote control, air purification filter, and sleep

mode for enhanced comfort and convenience. Available in 1 Ton to 2 Ton

25 Comprehensive fire safety system designed to detect, alert, and suppress fire 1.00 Nos 50500.00

hazards in residential, commercial, or industrial environments. Includes

smoke detectors, fire extinguishers, alarm systems, fire hoses, and sprinkler

systems. Ensures early warning and rapid response to minimize risk and

protect lives and property.

I / Weam / are willing to carryout the work at…………………. % above/ below percent (Should Be written in figures and words)

of the estimated rate mentioned above Amount of my / our tender works out as under.

*Estimated amount put to tender *Estimated amount put to tender

Deduct ……. % below Rs…………………… Add ………........% Above

*( please strike out whichever is not applicable)

1 The Contractor shall exhibition board with detailed specification and details of works directed by the Engineer – In –

2 The labourcess will be deducted as per prevailing rules i.e. 1% of the work done.

3 GST and Income tax TDS will be deducted at a source while making payments of bills.

4 In all R.C.C. Items in Rate Analysis Standard Cement Consumption has been taken as per Govt G.R.: PRC-10/2017

Executive Engineer

Signature of the contractor Panchayat (R & B) Division

ÀùËÿëÀËßÞí çèí Tapi