Loading
Loading…
Loading…
| # | Company | Amount | Rank | Status |
|---|---|---|---|---|
| 1 | 1st₹14.0 LAccepted-Finance 00 AGRA AGRA UTTAR PRADESH 282001 | AGRA | UTTAR PRADESH | 282001 | 1st | Accepted-Finance accepted | |
| 2 | 2nd₹14.6 L+₹63,775.66 (4.57%)Rejected-Finance | 2nd | Rejected-Finance refund | |
| 3 | 3rd₹14.8 L+₹85,034.22 (6.09%)Rejected-Finance | 3rd | Rejected-Finance refund |
Tender Value
₹14.2 L
EMD Value
₹28,500
Closing Date
20 Apr 2026, 6:00 pmClosed
Executive Engineer
HPPWD Division
Construction of steel Roofing over Existing Building
2026_PWD_134247_2
PW-DPD-CB-Tender2025-26- 773-75-dt-10.04.2026
Open Tender
Civil Works - Buildings
Percentage
90 days
Dharampur
Please refer Tender documents.
8 documents required · 8 mandatory
₹500
₹28,500
14 Jul 2026
13 Apr 2026
21 Apr 2026
13 Apr 2026
20 Apr 2026
13 Apr 2026
This is a percentage-rate BOQ. The schedule below shows estimated quantities and rates. Bidders quote a single percentage above or below the total estimated cost.
| Sl No | Description | Qty | Unit | Est. Rate | Est. Amount |
|---|---|---|---|---|---|
| 1Providing form work with mild steel plates 3.15 mm (three point one five millimetre) thick welded with angle iron in frame of 30x30x5mm (Thirty into thirty into five millimetre) size so as to give a fair finish including centring, shuttering, strutting and propping and centring etc etera with wooden battens and ballies in all heights of propping and centring below supporting floor to ceiling not exceeding 4 (four) meters and removal of the same for insitu-reinforced concrete and plain concrete work upto all floor level in all heights including entire carriage of material with in all leads lifts and technical specifications as per the direction by the Engineer-in-Charge and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. | |||||
| 1.1 | In columns, pillars,piers, abutments posts and struts square rectangular or polygonal in plan upto all floor level. | 1 | Per Square Metre | - | - |
| 1.2 | In beams, cantilevers, girders and lintels, sides and soffits of beams, beams haunching cantilevers bressumers and lintels in all depth /height not exceeding 1 (one) metre depths upto all floor levels | 1 | Per Square Metre | - | - |
| 2Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement, Reinforced cement concrete mechnically mixed vibrated design mix M-25 (twenty five) grade cement concrete for reinforced cement concrete work to obtained minium crushing strength of 25N/mm2 (Twenty five ) Newton per millimetres square) with minium cement contents not less then 400Kg/Cum (Four hundred killogramme per Cubic metres) using cement content as per approved design mix and curring complete, including entire carriage of materials within all leads and lifts and other incidentals.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. | |||||
| 3Providing and laying Twisted steel/deformed TMT and Medium Tensile steel bars Fe 500D for reinforced cement concrete work including straightening, cutting, bending, placing in position and binding in foundation complete including the cost of binding wire all complete above plinth level upto all floor levels including entire carriage of materials within all leads and lifts and other incidentals. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. | |||||
| 4Providing and fixing 0.60 mm( zero point sixty milimetres) thick prepainted steel sheets in roffing with hot dipped metallic zinc quoted sheet with top coat of regular modified polyester (RNP) organic coating of 20 microns (Twenty mixeones) over 5 ( five) microne primer coating to back coat of polyster of 5 (five)micrones over 5(five) micrones (Five microns) precoating including fixing with prepainted iron J or L hooks, bolts and nuts 6 mm ( six millimetre ) diameter with prepainted limpet and rubber washers complete with all accessories as required as per the direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals charges.The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. | |||||
| 5 | Providing and fixing ridges or hips 60cm (sixty centimeter) over all with 0.60mm (zero point sixty millimeter) thick prepainted steel sheet in roofing with hot dipped matalic zinc coated sheet with top coat of regular modifed polyser organic coating of 20 micron (Twenty microns) over 5 microns (Five microns) plus back coat of polyser of 5 microns (five micron) over 5 (five) micon priming coat including fixing with prepainted iron J” or “L” hooks bolts and nuts 6mm (six millimeter) dia G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals charges. The rates are inclusive of octroi, royality, Malkana, toll tax, sale tax , GST or other taxes imposed by the Government. | 1 | Per Running Metre | - | - |
| 6Providing and fixing velley 60cm (zero point sixty millimeter) over all 0.60mm (zero point sixty milimetres) thick prepainted steel sheet in roofing with hot dipped metalic zink coated sheet with top of regular modified polyster oraganic coated of back coat of polyster of 5 micron over 5 microns primer coating including fixing with prepainted iron “J” or “L” hooks bolts and nuts 6mm (six millimeter) dia G.I limpet and bitumen washer complete with all accessories as required as per direction of Engineer-in-charge including carriage of materials within all leads and lifts and other incidentals charges. The rates are inclusive of octroi, royality, malkana, toll tax, sale tax, GST or other taxes imposed by the Government. | |||||
| 7 | Structural steel work riveted, bolted or welded in builtup sections in trusses and trussed, in purlins in building framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. | 1 | Per Kilograme | - | - |
| 8 | Steel work welded in built up sections in trusses and framed work including cutting hoisting, fixing in position using structural steel etc. as required in Grating frames, guard bar, ladder railing, brackets, gates and similar work. and applying a priming coat of approved steel primer all complete. including entire carriage of material with in all leads and lifts and as per drawings and technical specifications as per direction of Engineer-in-Charge including other incidentals .The rates are inclusive of royality, GST or other taxes imposed by the Government. | 1 | Per Kilograme | - | - |
stage.html
html • 0.04 MB
tech_eval.pdf
boq_comp_chart.xlsx
xlsx
fin_eval.pdf
Tap a document below to read it instantly. You can also download everything as a ZIP if you prefer.
details.html
html • 0.03 MB
Tendernotice_1.pdf
PDF • 0.98 MB
BOQ_198522.xls
BOQ • 0.27 MB
4.rar
Tender Documents • 0.00 MB
abc.pdf
PDF • 1.05 MB
Download all tender documents and submit your bid
Disclaimer: TenderKart has made every reasonable effort to ensure that the information on this page is accurate and authentic, however it cannot be held liable for any third-party claims or losses or any damages. TenderKart makes no warranty, expressed or implied, as to the results obtained from the use of this information. If you notice any error or omission, please let us know at .