FABRICATION OF VARIOUS LINE MATERIALS (ITEMS) FOR ALL SDN IN ANAND RSO STORE UNDER ANAND (O&M) DIVISION

LABOUR WORKS FOR IN HOUSE FABRICATION PREPARATION OF VARIOUS ITEMS UNDER ANAND DO

ORDER AMOUNT FOR FABRICATION IS RS. 1636900/-

Rate as per cost

E-URJA data 24-25

item CODE DESCRIPTION UNIT QTY L.No.MGCOV/04

9' T.C.D.P.Set from 65x65x6 mm,M.S. Angle (1set = 8 Nos. 9ft

Angles + 2nos. 2ft.Angles + 2 nos 2'.6" bracing Angle )

9' T.C.D.P.Set from 65x65x6MM/50X50X6MM ,M.S. Angle (1set =

Nos. 9ft Angles of 65X65X6MM +2nos. 9ft.Angles & 2nos.

2ft.Angles of 50x50x6mm + 2 nos 2'.6" bracing Angle 50x50x6 mm

9' T.C.D.P.Set from 100*50*6 M.S.CHANEL/ 65x65x6 Mm

3 3611000002 angle(1set = 4 Nos 9ft. Angle, Top Botom 4 Nos. channel & 2 Set 300 432.00

Nos.2ft. of Angle + 2 nos 2'.6" bracing Angle)

9' T.C.D.P.Set from 100*50*6 M.S.CHANEL/

65x65x6Mm/50x50x6mm angle(1set = 2 Nos 9ft. Angle of

4 3611000002 65x65x6mm, Top Botom 4 Nos. channel, 2nos. 9ft.Angles & 2nos. Set 0 388.00

2ft.Angles of 50x50x6mm + 2 nos 2'.6" bracing Angle 50x50x6

Plain DO/DP Set 9 Feet from MS Angle 65x65x6 mm (1 set = 4 Nos.

6 3611000016 9'/11' M.S.Angle, with12 holes from 65X65X6mm No 50 40.00

7 3611000029 9' M.S.Angle Bracing from 50X50X6mm No 50 22.00

8 2609000004 2' M.S.Angle, with 09 holes from 65X65X6mm No 1000 16.00

9 2609000005 2'.6" M.S.Angle, with 09 holes & for HT ABC from 65X65X6mm No 50 16.00

10 2609000011 Tapping Angle 4'.6'' (With 8 hols) No 2000 20.00

11 2609000029 HT Garding Angle from 65X65X6mm No 500 21.00

12 2609000044 Tapping Channel 4'.6'' (With 8 hols) No 6000 20.00

Anchor Rod from 16 mm2 M.S. Round Bar & 65x 65x 6 MM M.S.

Turn Buckle from 16 mm2 M.S. Round Bar & 65x 65x 6 MM M.S.

Eye Bolt with two nuts from 16 mm 2 M.S. Round Bar (Nut

supplied by Contractor)

16 2601000084 11 KV Top Fitting From M.S.Angle 65x 65x6 mm No 2500 17.00

17 2601000040 U-Clamp from M.S. Flat of 50 x 6 mm No 8000 6.00

18 2601000052 Side Clamp for PSC Pole from MS Flat of 50* 6 mm No 2500 7.00

19 2601000061 Side Clamp for RSJ Pole from MS Flat of 50* 6 mm No 6000 7.00

20 2601000139 Side Clamp for PSC Pole from MS Flat of 50* 6 mm ''12 Inch No 6000 7.00

Side Clamp for Steel Tubular Pole size 4 1/2". 5 1/2" & 6 1/2"

22 2601000069 Stay Clamp for PSC Pole from M.S. Flat of 50x 6 MM Pair 5000 17.00

23 2601000072 Stay Clamp for RSJ Pole from M.S. Flat of 50x 6 MM Pair 5000 17.00

Stay Clamp for Steel Tubular Pole size 4 1/2". 5 1/2" & 6 1/2"

Stay Clamp for HT AB Cable for PSC Pole from M.S. Flat of 50x

Stay Clamp for HT AB Cable for RSJ Pole from M.S. Flat of 50x

27 2609000034 11KV V-Cross Arm from M.S.Angle of 65x 65x 6 MM No 4000 56.00

28 2609000042 11KV V-Cross Arm from M.S.Channel of 100x50x6 MM No 100 73.00

Extension V Cross Arm (V Cross Arm 5 Feet M S Angle/ Chanel

Stay Pair / Top Fitting)

30 2609000080 Extension of Girders from 9 meter to 11. No 20 856.00

31 2609000081 Extension of Girders from 9 meter to 13 meter No 5 856.00

32 2613000002 Three Hole patties No 200 6.00

33 3611000005 Top Channel 9 feet 100x50x6 mm with 14 Nos.hole. No 100 50.00

34 3611000006 Bottom Channel 9 feet 100x50x6 mm with 14 Nos.hole. No 100 50.00

35 9910000035 C Formation LT - 5 W ( M S Angle 50x50x6 mm) No 50 89.00

36 2601000063 M S Round Clamp 3' side ( M S Flat 50x6 mm) No 50 14.00

37 901000024 Earthing Coil for Consumer from GI Wire -8 SWG No 3500 11.00

38 901000055 Earthing Coil for Pole from GI Wire -8 SWG No 4000 11.00

39 901000030 Earthing Coil for 9 Mtr. RSJ from GI Wire -8 SWG No 500 11.00

40 901000031 Earthing Coil for 11 Mtr. RSJ from GI Wire -8 SWG No 500 11.00

Note: 1. Rate of item are consider as per cost data 2024-25

2. Labour charges for fabrication of HT/LT line & T/C items from various sizes of MS Angles / Channels / Flats / Round bar

G.I.Wire no 8 swg etc. As per our requirement and as per sample and specification with two coat of red oxide including cost

of red oxide, loading, unloading stacking of all fabricated item inside store yard.

3. Above said items are in variable quantity but order value is not more than Rs. 1199750/-.

4. 1% scrap allowed to fabricator IN MS ITEM, No Scrap Allowane Will be given in G.I. Wire

5. All fabrication item and Earthing coil should be prepared in house and necessary energy bill paid by contractor.

6. All Rates are excluding ofGST.

Execuitive Engineer