Construction of Block Development Office Building Sadar at Bhuili District Mandi HP SH Providing Electrical Installation therein

Amount

Wiring for light point / fan point / exhaust fan / call bell point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Group C.

Wiring for twin control light point with 1.5 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit with 2- way, 5/6 amps. modular switch, modular plates, suitable G.I. box and earthing the light point with 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Group C.

Wiring for light plug with 2x1.5 Sq. mm.PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No. 1.5 Sq.mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Wiring for power plug with 2x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No. 4 Sq. mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Wiring for power plug with 4x4 Sq. mm. PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 2 No. 4 Sq. mm. HRFRLS/PVC insulated single core copper conductor cable for earthing as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Wiring for circuit/sub-main with following size PVC insulated heat resistant flame retardant (HRFR) and low smoke single core (flexible) copper conductor cable in surface/recessed steel conduit along with 1 No. HRFRLS/PVC insulated single core copper conductor cable of same size for earthing as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

2 x 6.0 Sq. mm.

2 x 10 Sq. mm.

Supplying and drawing following pair of Fire Retardant, PVC insulated 0.5 sq.mm. (FR-Flexible) copper conductor, flat, unarmoured, telephone cable in existing surface / recessed, steel / PVC conduit as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and drawing co-axial TV cable,RG-6 grade,0.7mm (75 Ohms) copper conductor PE insulated, shielded with fine tinned copper braid and protected with PVC sheath in the existing surface / recessed, steel / PVC conduit as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing of following sizes of PVC conduit along with the accessories in surface / recess including cutting the wall and making good the same in case of recessed conduit as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

25 mm dia

Supplying and fixing following rating modular switch/socket in the existing switch box / cover plate including connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

S.P. 5/ 6 Amps one way Modular switch.

Bell push, Modular

5 pin, 5/ 6 Amps Modular socket outlet.

TV. Socket outlet, modular.

Supplying & fixing Modular blanking plate on the existing modular metal box as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing G.I. Modular box of (140 mm x 78 mm x 50 mm) size with modular plate and cover in recess including providing and fixing 5 pin 5/6 amps modular socket outlet and 5/6 amps, modular switch, connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing G.I. Modular box of (140 mm x 78 mm x 50 mm) size with modular plate and cover in recess including providing and fixing 6 pin 15/16 amps modular socket outlet and 15/16 amps, modular switch, connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing call bell / buzzer, suitable for D.C./A.C. single phase, 230 volts complete as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing Ding-Dong / Electronic musical bell, suitable for D.C./A.C. single phase, 230 volts complete as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and erection of following depth sheet metal cubical pedestal of suitable dimensions with plus-minus 5 cm variation, made from 1.6 mm thick M.S. sheet duly fabricated in a segregated manner for housing of switch fuse units, by welding each compartment on five sides & front side hinged, complete with locking arrangement, with sufficient No. vertical and horizontal intermediate switchgear housing compartments. The cubical pedestal shall have cable entry box at one or two sides, with epoxy powder coated approved paint and bonding to the existing earth etc. The same shall be erected in the 1:2:4 cement concrete plat-form of suitable dimensions 15 cm high from ground level and 45 cm thick. The cubical pedestal shall be 15 cm from the top of cement concrete plat-form complete in all respect as required.

450 mm deep (nominal)

Supplying and fixing copper strip bus-bars suitable for 100 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4 mm x 3.17 mm), in the existing enclosure with all accessories including connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing copper strip bus-bars suitable for 200 Amp. 415 volts capacity 4 No. each of cross-sectional area (25.4mmx4.75mm),in the existing enclosure with all accessories including connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Providing and fixing following rating and breaking capacity MCCB in the existing cubical panel board including drilling holes in the cubicle panel, making connections, etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

100 Amp. -16 KA

200 Amp. -25 KA

Supplying and erection of 6 amps. to 32 amps. rating, 10 KA breaking capacity, 240 volts, 'C' curves, miniature circuit breaker of following poles in the existing MCB DB complete with connections etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Single pole. Cat-A.

Supplying and fixing following rating, double pole, 240 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

40 Amps. Cat-A.

63 Amps. Cat-A.

Supplying and fixing following rating, double pole (single phase & neutral) 240 volts, residual current circuit breaker (RCCB), having a sensitivity current upto 300 milliampres in the existing MCB DB complete with connections, testing and commissioning etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

40 Amps. - Cat - A

63 Amps. - Cat - A

Supplying and fixing of following way, single pole and neutral sheet steel MCB distribution board, 240 volts, on surface / recess, complete with tinned copper bus- bar, wire-set, neutral link, earth bar, din-bar, detachable gland plate, blanking plate, cable, identification labels interconnections, phosphatized and powder painted, including earthing etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Double door-8 way

Double door-12 way

Earthing with G.I earth pipe 4.5 mtr. long and 40mm dia, including accessories and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. ( but without charcoal or coke and salt ) complete as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Extra for using salt and charcoal for pipe earth electrode complete as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and laying 6 SWG G.I. wire at 0.50 mtr. below ground level for earth electrode conductor, including soldering etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Providing, laying and fixing of one No. aluminium conductor, PVC insulated and PVC sheathed, armoured/XLPE power cable, working voltage 1100 volts grade on surface etc. of the required size complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Armoured cable 185 sq. mm (3.5 core)

Providing and fixing M.V.danger notice plate of 200 mm x 150 mm made of mild steel at least 2 mm thick, and vitreous enameled white on both sides and with inscription in signal red color on front side as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Providing, Installation, testing and commissioning of ceiling fan with regulator, including wiring the down rods of standard length (up to 30 cm) with 16/0.20 mm twin twisted flexible, cotton braided, copper cable, including providing and fixing phenolic laminated sheet cover on the fan box and earthing etc. as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Ceiling Fan 1200 mm sweep, Category-A

Supplying and fixing of Exhaust fan (Plastic ) with lavour shutter 300mm, 1000 RPM 1125 Air Delivery (CMM) Bajaj make DXL Model on the Existing opening complete with connection extra as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Mirror light 460 mm, single lamp.(Category-A)

Supplying and fixing fan box made of M.S sheet with iron rod Hook 12 mm in place of junction box complete as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing LED Lamps 10 watts Havells make in the existing battan holders, pendent holder, wall bracket etc, as required complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Providing ,installation testing and commissioning of Jaquor Make Glazed LED Batten Cat No. LGLZO1x024XN High quality design aluminioum extruded decorative end caps as per best satisfaction of Engineer –in- chargeas per price list jaquor June 2016 as requried complete in all respect in all leads and lift to the entire satisfaction of Engineer-in-Charge.

Supplying and fixing of fancy wall bracket containing thread type CFL lamp holder (s) of all sizes and shapes, complete with all accessories but excluding CFL lamp including making connections, testing etc. as required.

Long neck wall bracket 150mm dia single lamp Cat A

ARUN KUMAR SHARMA